Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Methyl 2-methyllactate > Methyl 2-methyllactate(2110-78-3)

Methyl 2-methyllactate(2110-78-3)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Methyl 2-methyllactate
Synonyms
2-Hydroxyisobutyric acid methyl ester
Lactic acid, 2-methyl-, methyl ester
Methyl 2-hydroxyisobutyrate
Methyl 2-methyllactate
Propanoic acid, 2-hydroxy-2-methyl-, methyl ester
CAS
2110-78-3
Formula
C5H10O3
Molecular Weight
118.13
EINECS
218-301-2
Beilstein/Gmelin
1746607

Physical and Chemical Properties

Appearance
Colorless liquid.
Solubility in water
Very soluble
Boiling Point
134 - 135
Density
1.029 g/cm3 (20 C)
pKa/pKb
13.14 (pKa)
Refractive Index
1.4129 (18.4 C)

First Aid Measures

Ingestion
Get medical aid. Wash mouth out with water.
Inhalation
Remove from exposure to fresh air immediately.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage
Keep away from sources of ignition. Store in a cool, dry place. Store in a tightly closed container. Flammables-area.
Handling
Use spark-proof tools and explosion proof equipment. Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes.

Hazards Identification

Ingestion
May cause irritation of the digestive tract. May be harmful if swallowed.
Inhalation
May cause respiratory tract irritation. May be harmful if inhaled.
Skin
May cause skin irritation. May be harmful if absorbed through the skin.
Eyes
May cause eye irritation.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
UN (DOT)
1993

Exposure Controls/Personal Protection

Personal Protection
Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point
41
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Forms explosive mixtures with air. Extinguishing media: Use water spray to cool fire-exposed containers. In case of fire use water spray, dry chemical, carbon dioxide, or chemical foam.
Fire Potential
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition. Use a spark-proof tool.

Stability and Reactivity

Incompatibilities
Oxidizing agents, acids, bases.
Stability
Stable under normal temperatures and pressures.
Decomposition
Carbon monoxide, carbon dioxide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1993
Hazard Class
3
Packing Group
I; II; III
Contact More