Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > 4-Fluoro-1,1'-biphenyl > 4-Fluoro-1,1'-biphenyl(324-74-3)

4-Fluoro-1,1'-biphenyl(324-74-3)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity

Product Identification

Product Name
4-Fluoro-1,1'-biphenyl
Synonyms
(4-Fluorophenyl)benzene
1-Fluoro-4-phenylbenzene
4-Fluorobiphenyl
p-Fluorobiphenyl
p-Fluorodiphenyl
CAS
324-74-3
Formula
C12H9F
Molecular Weight
172.2
EINECS
206-304-1
RTECS
DV5291200
RTECS Class
Mutagen
Beilstein/Gmelin
2042410
Beilstein Reference
4-05-00-01815

Physical and Chemical Properties

Appearance
Odorless white to light beige crystalline powder
Solubility in water
Insoluble
Melting Point
59 - 61
Boiling Point
253
Vapor Pressure
0.03 (25 C)
Density
1.247 g/cm3 (25 C)
Partition Coefficient
4
Heat Of Vaporization
47.1 kJ/mol
Vapor Density
>1

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation. Use with adequate ventilation.

Hazards Identification

Inhalation
Causes respiratory tract irritation. Can produce delayed pulmonary edema.
Skin
Causes skin irritation.
Eyes
Causes eye irritation. May cause chemical conjunctivitis.
Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
EC Safety Phrase
S 22 24/25

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Effects may be delayed.

Fire Fighting Measures

Flash Point
96
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

Accidental Release Measures

Small spills/leaks
Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions. Provide ventilation.

Stability and Reactivity

Stability
Stable at room temperature in closed containers under normal storage and handling conditions.
Incompatibilities
Strong oxidizing agents.
Decomposition
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride.
Contact More