Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > potassium [2S-(2alpha,5alpha,6beta)]-3,3-dimethyl-7-oxo-6-(phenylacetamido)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate > potassium [2S-(2alpha,5alpha,6beta)]-3,3-dimethyl-7-oxo-6-(phenylacetamido)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate(113-98-4)

potassium [2S-(2alpha,5alpha,6beta)]-3,3-dimethyl-7-oxo-6-(phenylacetamido)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate(113-98-4)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity

Product Identification

Product Name
potassium [2S-(2alpha,5alpha,6beta)]-3,3-dimethyl-7-oxo-6-(phenylacetamido)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate
Synonyms
(2S,5R,6R)-3,3-Dimethyl-7-oxo-6-[(2-phenylacetyl)amino]-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid
(5R,6R)-Benzylpenicillin
2,2-Dimethyl-7beta-(phenylacetamido)cepham-3alpha-carboxylic acid
CAS
113-98-4
Formula
C16H17KN2O4S
Molecular Weight
372.48
EINECS
204-038-0
RTECS
XH9700000
RTECS Class
Mutagen
Beilstein/Gmelin
3832841
Beilstein Reference
4-27-00-05861

Physical and Chemical Properties

Appearance
odorless colorless or white solid
Melting Point
214 - 217
Density
1.359 g/cm3
Usage
Antibiotic.

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid. If conscious drink water, then induce vomiting. If unconscious, immediately take victim to a physician and do NOT attempt to induce vomiting.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin
Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage
Store in a cool place in the original container and protect from sunlight. Keep container closed when not in use.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.

Hazards Identification

Inhalation
May cause allergic respiratory reaction. May cause respiratory tract irritation.
Skin
May cause skin irritation. May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material.
Eyes
May cause mild eye irritation.
Ingestion
Ingestion of large amounts may cause gastrointestinal irritation.

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Laboratory experiments have resulted in mutagenic effects.

Fire Fighting Measures

Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. This material in sufficient quantity and reduced particle size is capable of creating a dust explosion. Extinguishing media: Substance is nonflammable; use agent most appropriate to extinguish surrounding fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Accidental Release Measures

Small spills/leaks
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation.

Stability and Reactivity

Incompatibilities
Oxidizing agents, heavy metal salts, acids.
Stability
Stable under normal temperatures and pressures.
Decomposition
Irritating and toxic fumes and gases.
Contact More