Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > (Perfluorohexyl)ethylene > (Perfluorohexyl)ethylene(25291-17-2)

(Perfluorohexyl)ethylene(25291-17-2)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
(Perfluorohexyl)ethylene
Synonyms
1-Octene, 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-
3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooct-1-ene
CAS
25291-17-2
Formula
C8H3F13
Molecular Weight
346.09
EINECS
246-791-8
Beilstein/Gmelin
2060994

Physical and Chemical Properties

Appearance
Colorless liquid.
Boiling Point
100
Density
1.56 g/cm3 (20 C)
Vapor Density
11.9
Refractive Index
1.30 (20 C)

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage
Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area.
Handling
Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Use with adequate ventilation. Wash clothing before reuse. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Inhalation
Causes respiratory tract irritation. Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause cardiac abnormalities. Can produce delayed pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation. May cause burning sensation in the chest.
Skin
Causes skin irritation. May cause cyanosis of the extremities.
Eyes
Causes eye irritation. May cause chemical conjunctivitis and corneal damage.
Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May cause cardiac disturbances. Ingestion of large amounts may cause CNS depression.
EC Risk Phrase
R 11
EC Safety Phrase
S 16 23 24/25 29
UN (DOT)
1993

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Exposure Effects
Effects may be delayed.

Fire Fighting Measures

Flash Point
19
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Runoff from fire control or dilution water may cause pollution. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Stability and Reactivity

Stability
Stable at room temperature in closed containers under normal storage and handling conditions.
Incompatibilities
Strong oxidizing agents.
Decomposition
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride.

Transport Information

UN Number
1993
Contact More