Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Dodecyl isocyanate > Dodecyl isocyanate(4202-38-4)

Dodecyl isocyanate(4202-38-4)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Dodecyl isocyanate
Synonyms
1-Dodecyl isocyanate
1-Isocyanatododecane
Isocyanic acid, dodecyl ester
Lauryl isocyanate
CAS
4202-38-4
Formula
C13H25NO
Molecular Weight
211.34
EINECS
224-111-0
Beilstein/Gmelin
1774823
Beilstein Reference
4-04-00-00807

Physical and Chemical Properties

Appearance
Colorless liquid.
Solubility in water
Insoluble
Boiling Point
132
Density
0.877 g/cm3 (20 C)
Vapor Density
7.29
Refractive Index
1.44 (20 C)

First Aid Measures

Ingestion
Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Do NOT allow victim to rub or keep eyes closed.

Handling and Storage

Storage
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.
Handling
Wash thoroughly after handling. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Do not allow contact with water. Wash clothing before reuse. Keep from contact with moist air and steam.

Hazards Identification

Inhalation
Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. At high concentrations, isocyanates affect mucous membranes of the respiratory tract and may lead to fatal pulmonary edema. Exposure to low and often even unmeasurable isocyanate concentration results in sensitization. Can produce delayed pulmonary edema.
Skin
Causes skin irritation. Organic isocyanates can cause local irritation and allergic reactions.
Eyes
Causes eye irritation. Lachrymator. May cause chemical conjunctivitis.
Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
Hazards
Vapors form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapors may travel to source of ignition and flash back. Substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff.
EC Risk Phrase
R 20/22 36/37/38 42
EC Safety Phrase
S 23 26 36/37/39 45
UN (DOT)
2206

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Effects may be delayed. Chronic overexposure to isocyanates has been reported to cause lung damage, including decreased lung fuction, which may be permanent.

Fire Fighting Measures

Flash Point
134
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Containers may explode when heated. Extinguishing media: Use agent most appropriate to extinguish fire. Do NOT get water inside containers. Cool containers with flooding quantities of water until well after fire is out. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
Fire Potential
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Provide ventilation. Do not get water inside containers.

Stability and Reactivity

Incompatibilities
Moisture, alcohols, water, strong bases, strong oxidizing agents, acids, amines.
Stability
Stable at room temperature in closed containers under normal storage and handling conditions.
Decomposition
Hydrogen cyanide, carbon monoxide, oxides of nitrogen, irritating and toxic fumes and gases, carbon dioxide.
Combustion Products
Fire will produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
2206
Hazard Class
6.1
Packing Group
II; III
Contact More