Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 3-(Chloromethyl)benzoyl chloride > 3-(Chloromethyl)benzoyl chloride(63024-77-1)

3-(Chloromethyl)benzoyl chloride(63024-77-1)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
3-(Chloromethyl)benzoyl chloride
Synonyms
3-Chloromethylbenzoyl chloride
m-(Chloromethyl)benzoyl chloride
m-Toluoyl chloride, a-chloro-
CAS
63024-77-1
Formula
C8H6Cl2O
Molecular Weight
189.04
EINECS
263-799-7
Beilstein/Gmelin
2436228
Beilstein Reference
3-09-00-02328

Physical and Chemical Properties

Appearance
Clear, colorless liquid.
Solubility in water
Insoluble
Melting Point
4
Boiling Point
268
Vapor Pressure
0.008 (25 C)
Density
1.331 g/cm3 (20 C)
Partition Coefficient
2.48
Heat Of Vaporization
56.3 kJ/mol
Vapor Density
6.5
Refractive Index
1.573 (25 C)

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Store in a cool, dry place. Keep container closed when not in use. Store in a tightly closed container. Keep under a nitrogen blanket. Corrosives area. Store protected from moisture.
Handling
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Use with adequate ventilation. Use only in a chemical fume hood. Discard contaminated shoes. Keep from contact with moist air and steam.

Hazards Identification

Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns.
Inhalation
May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema. Causes chemical burns to the respiratory tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Skin
Causes skin burns.
Eyes
Causes eye burns. Lachrymator.
Hazards
May explode from heat or contamination. May react explosively with hydrocarbons (fuels). May ignite combustibles.
EC Risk Phrase
R 34 36/37
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
1479

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point
110
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: Use foam, dry chemical, or carbon dioxide. Do NOT get water inside containers. Cool containers with flooding quantities of water until well after fire is out.
Fire Potential
These substances will accelerate burning when involved in a fire.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Provide ventilation. Do not get water inside containers.

Stability and Reactivity

Stability
Stable at room temperature in closed containers under normal storage and handling conditions.
Incompatibilities
Strong oxidizing agents.
Decomposition
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1479
Hazard Class
5.1
Packing Group
I; II; III
Contact More