Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Di-p-anisylphenylmethyl chloride > Di-p-anisylphenylmethyl chloride(40615-36-9)

Di-p-anisylphenylmethyl chloride(40615-36-9)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Di-p-anisylphenylmethyl chloride
Synonyms
1,1'-(Chlorophenylmethylene)bis[4-methoxybenzene]
1-[Chloro-(4-methoxyphenyl)-phenylmethyl]-4-methoxybenzene
4,4'-Dimethoxytriphenylmethyl chloride
Bis(4-methoxyphenyl)phenylmethyl chloride
Chlorobis(4-methoxyphenyl)phenylmethane
CAS
40615-36-9
Formula
C21H19ClO2
Molecular Weight
338.84
EINECS
255-002-6
Beilstein/Gmelin
2471942
Beilstein Reference
0-06-00-01042

Physical and Chemical Properties

Appearance
Pink solid.
Solubility in water
Insoluble
Melting Point
120 - 123

First Aid Measures

Ingestion
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin
Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.

Hazards Identification

Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
Inhalation
Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Skin
Causes skin irritation.
Eyes
Causes eye irritation.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
EC Risk Phrase
R 36/37/38
EC Safety Phrase
S 26 36
UN (DOT)
1987

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Dusts at sufficient concentrations can form explosive mixtures with air. Extinguishing media: Use water spray, dry chemical, or carbon dioxide.
Fire Potential
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation.

Stability and Reactivity

Disposal Code
3
Stability
Stable under normal temperatures and pressures.
Incompatibilities
Strong oxidizing agents.
Decomposition
Hydrogen chloride, carbon monoxide, carbon dioxide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1987
Hazard Class
3
Packing Group
I; II; III
HS Code
2909 30 90
Contact More