Supplier Product Identification Physical and Chemical Properties First Aid Measures Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Transport Information Stability and Reactivity
Home > 1-Chloromethyl-4-methoxybenzene > 1-Chloromethyl-4-methoxybenzene(824-94-2)

1-Chloromethyl-4-methoxybenzene(824-94-2)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Transport Information Stability and Reactivity

Product Identification

Product Name
1-Chloromethyl-4-methoxybenzene
Synonyms
1-(Chloromethyl)-4-methoxybenzene
4-Methoxybenzyl chloride
p-(Chloromethyl)anisole
CAS
824-94-2
Formula
C8H9ClO
Molecular Weight
156.61000000000001
EINECS
212-540-6
Beilstein/Gmelin
606667
Beilstein Reference
4-06-00-02137
EC Class
corrosive

Physical and Chemical Properties

Solubility in water
Insoluble
Melting Point
-1
Boiling Point
244
Vapor Pressure
0.05 (25 C)
Density
1.072 g/cm3 (0 C)
Partition Coefficient
2.4
Heat Of Vaporization
46.1 kJ/mol
Refractive Index
1.55 (20 C)

First Aid Measures

Ingestion
Seek medical assistance.
Inhalation
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult.
Skin
Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.
Eyes
Immediately flush with running water for at least 20 minutes.

Hazards Identification

Ingestion
See Inhalation.
Inhalation
TOXIC; inhalation, ingestion, or skin contact with material may cause severe injury or death. Effects of contact or inhalation may be delayed.
Skin
Contact with molten substance may cause severe burns to skin and eyes. See Inhalation.
Eyes
See Inhalation.
Hazards
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.
EC Risk Phrase
R 34 36
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
3265

Exposure Controls/Personal Protection

Personal Protection
Wear appropriate protective gloves, clothing and goggles.
Respirators
Wear positive pressure self-contained breathing apparatus (SCBA).

Fire Fighting Measures

Flash Point
109
Fire Fighting
Small Fires: Dry chemical, carbon dioxide or water spray. Large Fires: Dry chemical, carbon dioxide, alcohol-resistant foam or water spray.
Fire Potential
Combustible material: may burn but does not ignite readily.

Accidental Release Measures

Small spills/leaks
ELIMINATE all ignition sources. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS.

Transport Information

UN Number
3265
HS Code
2909 30 90

Stability and Reactivity

Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.
Contact More