Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 1-Methylcyclopentanol > 1-Methylcyclopentanol(1462-03-9)

1-Methylcyclopentanol(1462-03-9)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
1-Methylcyclopentanol
Synonyms
1-Hydroxy-1-methylcyclopentane
1-Methyl-1-cyclopentanol
1-Methylcyclopentan-1-ol
CAS
1462-03-9
Formula
C6H12O
Molecular Weight
100.16
EINECS
215-963-4
Beilstein/Gmelin
2036183
Beilstein Reference
4-06-00-00086

Physical and Chemical Properties

Appearance
Crystalline powder.
Solubility in water
Slightly soluble
Melting Point
32 - 33
Boiling Point
135
Vapor Pressure
3 (25 C)
Density
0.905 g/cm3 (23.5 C)
Partition Coefficient
1.32
Heat Of Vaporization
55.5 kJ/mol
Refractive Index
1.43855 (40 C)

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Do not use mouth-to-mouth respiration if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Inhalation
Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause burning sensation in the chest.
Skin
May cause irritation and dermatitis. May cause cyanosis of the extremities.
Eyes
May cause eye irritation. May cause chemical conjunctivitis and corneal damage.
Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Ingestion of large amounts may cause CNS depression.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
UN (DOT)
1987

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Exposure Effects
Effects may be delayed.

Fire Fighting Measures

Flash Point
41
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.
Fire Potential
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Avoid generating dusty conditions. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Stability and Reactivity

Stability
Stable under normal temperatures and pressures.
Incompatibilities
Strong oxidizing agents, strong acids, strong reducing agents, acid chlorides, acid anhydrides.
Decomposition
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1987
Hazard Class
3
Packing Group
I; II; III
Contact More