Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 3,5-Difluorobenzenamine > 3,5-Difluorobenzenamine(372-39-4)

3,5-Difluorobenzenamine(372-39-4)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
3,5-Difluorobenzenamine
Synonyms
3,5-Difluoronitroaniline
3,5-Difluorobenzeneamine
3,5-Difluorophenylamine
CAS
372-39-4
Formula
C6H5F2N
Molecular Weight
129.11000000000001
EINECS
206-752-8
Beilstein/Gmelin
2802286
Beilstein Reference
4-12-00-0114

Physical and Chemical Properties

Appearance
Solid.
Solubility in water
Slightly soluble
Melting Point
37-41
Boiling Point
185
Vapor Pressure
0.7 (25 C)
Density
1.295 g/cm3 (20 C)
pKa/pKb
11.42 (pKb)
Partition Coefficient
1.84
Heat Of Vaporization
42.2 kJ/mol

First Aid Measures

Ingestion
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Wash thoroughly after handling. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion
The toxicological properties of this substance have not been fully investigated.
Inhalation
The toxicological properties of this substance have not been fully investigated. Inhalation of dust may cause respiratory tract irritation.
Skin
No information regarding skin irritation and other potential effects was found.
Eyes
No information regarding eye irritation and other potential effects was found.
Hazards
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.
EC Risk Phrase
R 20/21/22 36/38
EC Safety Phrase
S 26 36/37/39
UN (DOT)
2941

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point
75
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Combustible solid. Extinguishing media: Use water spray to cool fire-exposed containers. Do NOT get water inside containers. For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray. Cool containers with flooding quantities of water until well after fire is out.
Fire Potential
Combustible material: may burn but does not ignite readily.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition. Do not get water inside containers.

Stability and Reactivity

Stability
No data.
Incompatibilities
Strong oxidizing agents, strong acids.
Decomposition
Carbon monoxide, oxides of nitrogen, carbon dioxide, hydrogen fluoride.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
2941
Hazard Class
6.1
Packing Group
III
Contact More