Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Di-sec-butylphenol > Di-sec-butylphenol(5510-99-6)

Di-sec-butylphenol(5510-99-6)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
Di-sec-butylphenol
Synonyms
2,6-Di(butan-2-yl)phenol
Phenol, 2,6-bis(1-methylpropyl)-
CAS
5510-99-6
Formula
C14H22O
Molecular Weight
206.32
EINECS
226-854-6
RTECS
SK8225000
RTECS Class
Primary Irritant
Beilstein/Gmelin
2258305
Beilstein Reference
4-06-00-03490

Physical and Chemical Properties

Appearance
Amber liquid.
Solubility in water
Insoluble
Melting Point
-42
Boiling Point
255
Density
0.9386 g/cm3 (20 C)
pKa/pKb
10.57 (pKa)
Vapor Density
7.11
Refractive Index
1.508 (19 C)

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area.
Handling
Keep container tightly closed. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation. Discard contaminated shoes.

Hazards Identification

Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns.
Inhalation
Causes chemical burns to the respiratory tract.
Skin
Causes skin burns.
Eyes
Causes eye burns.
Hazards
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.
UN (DOT)
3145

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.
Poison Class
-

Fire Fighting Measures

Flash Point
127
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam.
Fire Potential
Combustible material: may burn but does not ignite readily.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation.

Stability and Reactivity

Stability
Stable under normal temperatures and pressures.
Incompatibilities
Strong oxidizing agents.
Decomposition
Carbon monoxide, carbon dioxide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
3145
Hazard Class
8
Packing Group
I; II; III
Contact More