Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 2-Nitrophenylsulfenyl chloride > 2-Nitrophenylsulfenyl chloride(7669-54-7)

2-Nitrophenylsulfenyl chloride(7669-54-7)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
2-Nitrophenylsulfenyl chloride
Synonyms
2-Nitrobenzenesulfenic acid chloride
2-Nitrobenzenesulfenyl chloride
2-Nitrophenylsulfenyl chloride
o-Nitrophenylsulfenyl chloride
CAS
7669-54-7
Formula
C6H4ClNO2S
Molecular Weight
189.61
EINECS
231-644-2
Beilstein/Gmelin
473741
Beilstein Reference
4-06-00-01676

Physical and Chemical Properties

Appearance
Gold powder.
Solubility in water
Insoluble
Melting Point
75
Boiling Point
350
Vapor Pressure
9E-5 (25 C)
Density
1.67 g/cm3
Partition Coefficient
3.56
Heat Of Vaporization
57.1 kJ/mol
Vapor Density
6.54

First Aid Measures

Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Discard contaminated clothing in a manner which limits further exposure. Destroy contaminated shoes.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed.

Handling and Storage

Storage
Store in a cool, dry, well-ventilated area away from incompatible substances. Keep away from water. Refrigerator (approx 4 C). Keep containers tightly closed.
Handling
Minimize dust generation and accumulation. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Use with adequate ventilation. Discard contaminated shoes.

Hazards Identification

Ingestion
Causes digestive tract irritation with possible burns.
Inhalation
Causes chemical burns to the respiratory tract. Effects of inhalation may be delayed.
Skin
May cause severe irritation and possible burns.
Eyes
Dust may cause mechanical irritation. Contact with eyes may cause severe irritation, and possible eye burns.
Hazards
Contact with metals may evolve flammable hydrogen gas.
EC Risk Phrase
R 34 37
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
1759

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin. Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point
166
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Substance is noncombustible. Contact with metals may evolve flammable hydrogen gas. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Cool containers with flooding quantities of water until well after fire is out.
Fire Potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation. Do not get water inside containers.

Stability and Reactivity

Stability
Stable under normal temperatures and pressures.
Incompatibilities
Strong oxidizing agents, strong bases.
Decomposition
Hydrogen chloride, nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide, nitrogen.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1759
Hazard Class
8
Packing Group
I; II; III
Contact More