Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > Sulfafurazole > Sulfafurazole(127-69-5)

Sulfafurazole(127-69-5)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity

Product Identification

Product Name
Sulfafurazole
Synonyms
5-(4-Aminophenylsulfonamido)-3,4-dimethylisoxazole
5-(p-Aminobenzenesulfonamido)-3,4-dimethylisoxazole
Alphazole
Amidoxal
Azo gantrisin
Chemouag
CAS
127-69-5
Formula
C11H13N3O3S
Molecular Weight
267.31
EINECS
204-858-9
RTECS
WO9100000
RTECS Class
Tumorigen; Drug; Mutagen; Reproductive Effector
Merck
12,9125
Beilstein/Gmelin
263871
Beilstein Reference
4-27-00-04747

Physical and Chemical Properties

Appearance
Odorless white to yellowish crystalline powder. Slightly bitter taste. Acid to litmus.
Solubility in water
1 g in about 6700 ml
Melting Point
213
Density
1.41 g/cm3
pKa/pKb
9.30 (pKb)
Partition Coefficient
1.01
Usage
Medication (vet).

First Aid Measures

Ingestion
DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.
Inhalation
IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.
Skin
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
Eyes
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Handling and Storage

Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

Hazards Identification

Inhalation
Symptoms of exposure to this chemical include anaphylaxis, generalized allergic reactions, angioneurotic edema, arteritis, vasculitis, myocarditis, serum sickness, conjunctival and scleral injection, periarteritis nodosa, systemic lupus erythematosus, tachycardia, palpitations, syncope, cyanosis, rash, urticaria, pruritus.
Skin
See inhalation.
Eyes
See inhalation
Ingestion
Nausea and vomiting are likely to occur.

Exposure Controls/Personal Protection

Personal Protection
Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.
Respirators
Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.
Exposure Effects
headache, depression, and hallucinations have been reported with therapeutic use of sulfonamides. Coma and seizures were reported following a large overdose of sulfasalazine in one patient. Tremor occurred in one patient following a fixed-dose combination of trimethoprim/sulfamethoxazole.

Fire Fighting Measures

Fire Fighting
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher.
Fire Potential
This material is probably combustible.

Accidental Release Measures

Small spills/leaks
If a spill of this chemical occurs, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with acetone and transfer the dampened material to a suitable container. Use absorbent paper dampened with acetone to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

Stability and Reactivity

Stability
In air sensitive to light; unstable in alkaline solution commercially available prepn must be protected from light and moisture, incl relative humidity in excess of 60%, and have expiration dates from 2 to 5 yr following date of mfr.
Contact More