Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 3-tert-Butylphenol > 3-tert-Butylphenol(585-34-2)

3-tert-Butylphenol(585-34-2)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
3-tert-Butylphenol
Synonyms
3-(1,1-Dimethylethyl)phenol
3-tert-Butylphenol
5-tert-Butyl-1-hydroxybenzene
m-tert-Butylphenol
CAS
585-34-2
Formula
C10H14O
Molecular Weight
150.22
EINECS
209-553-4
Beilstein/Gmelin
1906565
Beilstein Reference
4-06-00-03294

Physical and Chemical Properties

Appearance
White - almost white crystalline powder.
Solubility in water
Insoluble
Melting Point
43
Boiling Point
240
Vapor Pressure
0.0009 (5 C)
Density
1.048 g/cm3 (20 C)
pKa/pKb
10.08 (pKa)
Heat Of Vaporization
69.1 kJ/mol
Heat Of Combustion
-5649 kJ/mol
Refractive Index
1.523 (20 C)

First Aid Measures

Ingestion
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation
Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Wash clothing before reuse.

Hazards Identification

Inhalation
Causes respiratory tract irritation. May cause methemoglobinemia, cyanosis, convulsions, tachycardia, dyspnea, and death. May cause liver and kidney damage. May cause cardiac abnormalities. Can produce delayed pulmonary edema.
Skin
Causes skin irritation. May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material.
Eyes
Causes eye irritation. May cause chemical conjunctivitis.
Ingestion
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May cause liver and kidney damage. May cause cardiac disturbances. May cause methemoglobinemia, cyanosis, convulsions, and death. May cause central nervous system effects.
Hazards
When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.
UN (DOT)
2229

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Exposure Effects
May cause liver and kidney damage. May cause methemoglobinemia, which is characterized by chocolate-brown colored blood, headache, weakness, dizziness, breath shortness, cyanosis, rapid heart rate, unconsciousness and possible death. Effects may be delayed.

Fire Fighting Measures

Flash Point
108
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. May react with metals and lead to the formation of flammable hydrogen gas. Runoff from fire control or dilution water may cause pollution. Extinguishing media: For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray. Cool containers with flooding quantities of water until well after fire is out.
Fire Potential
Combustible material: may burn but does not ignite readily.

Accidental Release Measures

Small spills/leaks
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation.

Stability and Reactivity

Incompatibilities
Oxidizing agents, bases, acid chlorides, brass, copper, copper alloys, steel, acid anhydrides.
Stability
Stable at room temperature in closed containers under normal storage and handling conditions.
Decomposition
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
2229
Hazard Class
8
Packing Group
III
Contact More