Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 2-Chlorothiophene > 2-Chlorothiophene(96-43-5)

2-Chlorothiophene(96-43-5)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
2-Chlorothiophene
Synonyms
2-Thienyl chloride
CAS
96-43-5
Formula
C4H3ClS
Molecular Weight
118.59
EINECS
202-505-3
Beilstein/Gmelin
104652
Beilstein Reference
5-17-01-00303
EC Class
flammable

Physical and Chemical Properties

Appearance
Colorless to brown liquid. With a stench.
Solubility in water
Insoluble
Melting Point
-1
Boiling Point
127
Vapor Pressure
13 (25 C)
Density
1.2838 g/cm3 (14.2 C)
Partition Coefficient
2.79
Heat Of Vaporization
35.1 kJ/mol
Refractive Index
1.5487 (20 C)

First Aid Measures

Ingestion
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Refrigerator/flammables.
Handling
Wash thoroughly after handling. Use only in a well ventilated area. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.

Hazards Identification

Ingestion
The toxicological properties of this substance have not been fully investigated.
Inhalation
The toxicological properties of this substance have not been fully investigated.
Skin
No information regarding skin irritation and other potential effects was found.
Eyes
No information regarding eye irritation and other potential effects was found.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion and poison hazard indoors, outdoors or in sewers.
EC Risk Phrase
R 10 23/24/25
EC Safety Phrase
S 16 23 36/37 45
UN (DOT)
1992

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point
22
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Extinguishing media: Use water spray to cool fire-exposed containers. Use foam, dry chemical, or carbon dioxide. Water may be ineffective.
Fire Potential
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition. Use a spark-proof tool.

Stability and Reactivity

Stability
Stable under normal temperatures and pressures.
Incompatibilities
Strong bases - strong oxidizing agents.
Decomposition
Hydrogen chloride, phosgene, carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen sulfide.
Combustion Products
Fire will produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1992
Hazard Class
3
Packing Group
I; II; III
HS Code
2934 99 90
Contact More