Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 3-(Trifluoromethyl)benzyl bromide > 3-(Trifluoromethyl)benzyl bromide(402-23-3)

3-(Trifluoromethyl)benzyl bromide(402-23-3)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
3-(Trifluoromethyl)benzyl bromide
Synonyms
3-(Bromomethyl)benzotrifluoride
3-(Trifluoromethyl)benzyl bromide
a'-Bromo-a,a,a-trifluoro-m-xylene
m-(Trifluoromethyl)benzyl bromide
CAS
402-23-3
Formula
C8H6BrF3
Molecular Weight
239.03
EINECS
206-938-9
Beilstein/Gmelin
743243

Physical and Chemical Properties

Appearance
Colorless liquid.
Solubility in water
Insoluble
Boiling Point
50 (0.3 torr)
Density
1.56 g/cm3
Refractive Index
1.49 (20 C)

First Aid Measures

Ingestion
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Skin
Get medical aid immediately. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed.

Handling and Storage

Storage
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Handling
Wash thoroughly after handling. Use only in a well ventilated area. Ground and bond containers when transferring material. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion
The toxicological properties of this substance have not been fully investigated.
Inhalation
The toxicological properties of this substance have not been fully investigated.
Skin
No information regarding skin irritation and other potential effects was found.
Eyes
Causes eye irritation. Lachrymator.
Hazards
Contact with metals may evolve flammable hydrogen gas.
EC Risk Phrase
R 34 36
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
1760

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point
87
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Combustible Liquid. Extinguishing media: Use agent most appropriate to extinguish fire.
Fire Potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks
Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal.

Stability and Reactivity

Stability
No data.
Incompatibilities
Strong oxidizing agents, strong bases.
Decomposition
Carbon monoxide, carbon dioxide, hydrogen fluoride, hydrogen bromide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1760
Hazard Class
8
Packing Group
I; II; III
Contact More