Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 2,2,3,3-Tetrafluoropropyl methacrylate > 2,2,3,3-Tetrafluoropropyl methacrylate(45102-52-1)

2,2,3,3-Tetrafluoropropyl methacrylate(45102-52-1)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information

Product Identification

Product Name
2,2,3,3-Tetrafluoropropyl methacrylate
Synonyms
1,1,3-Trihydroperfluoropropyl methacrylate
1,1,3-Trihydrotetrafluoropropyl methacrylate
2,2,3,3-Tetrafluoropropyl 2-methylprop-2-enoate
2-Propenoic acid, 2-methyl-, 2,2,3,3-tetrafluoropropyl ester
Viscoat 4FM
CAS
45102-52-1
Formula
C7H8F4O2
Molecular Weight
200.13
EINECS
256-189-7
Beilstein/Gmelin
3588831

Physical and Chemical Properties

Appearance
Colorless liquid.
Solubility in water
Insoluble
Melting Point
147
Boiling Point
46 (0.1 torr)
Density
1.2598 g/cm3
Vapor Density
6.9
Refractive Index
1.3757 (20 C)

First Aid Measures

Ingestion
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin
Get medical aid. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area. Keep containers tightly closed.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Use only in a chemical fume hood. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. May be harmful if swallowed.
Inhalation
The toxicological properties of this substance have not been fully investigated. May be harmful if inhaled. Vapors may cause dizziness or suffocation. Causes upper respiratory tract irritation. Causes irritation of the mucous membrane.
Skin
Causes skin irritation. May be harmful if absorbed through the skin.
Eyes
Causes eye irritation.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
EC Risk Phrase
R 10 36/37/38
EC Safety Phrase
S 26 28
UN (DOT)
1993

Exposure Controls/Personal Protection

Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Fire Fighting Measures

Flash Point
50
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Water may be ineffective. Do NOT use straight streams of water. Cool containers with flooding quantities of water until well after fire is out.
Fire Potential
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors. Water spray may reduce vapor but may not prevent ignition in closed spaces.

Stability and Reactivity

Stability
Stable under normal temperatures and pressures.
Incompatibilities
Strong oxidizing agents, strong reducing agents.
Decomposition
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number
1993
Hazard Class
3
Packing Group
I; II; III
Contact More