tert-Butyl 4-carbamothioylpiperidine-1-carboxylate
Modify Date: 2024-01-02 17:10:25
 tert-Butyl 4-carbamothioylpiperidine-1-carboxylate structure | Common Name | tert-Butyl 4-carbamothioylpiperidine-1-carboxylate |
|---|
| CAS Number | 214834-18-1 | Molecular Weight | 244.354 |
|---|
| Density | 1.2±0.1 g/cm3 | Boiling Point | 356.0±52.0 °C at 760 mmHg |
|---|
| Molecular Formula | C11H20N2O2S | Melting Point | 130-131ºC |
|---|
| MSDS | N/A | Flash Point | 169.1±30.7 °C |
|---|
|
|
|
|
|
|
|
|
Names
| Name | tert-butyl 4-carbamothioylpiperidine-1-carboxylate |
|---|
| Synonym | More Synonyms |
|---|
Chemical & Physical Properties
| Density | 1.2±0.1 g/cm3 |
|---|
| Boiling Point | 356.0±52.0 °C at 760 mmHg |
|---|
| Melting Point | 130-131ºC |
|---|
| Molecular Formula | C11H20N2O2S |
|---|
| Molecular Weight | 244.354 |
|---|
| Flash Point | 169.1±30.7 °C |
|---|
| Exact Mass | 244.124542 |
|---|
| PSA | 87.65000 |
|---|
| LogP | 1.07 |
|---|
| Vapour Pressure | 0.0±0.8 mmHg at 25°C |
|---|
| Index of Refraction | 1.546 |
|---|
MSDS
Name:tert-Butyl 4-(aminocarbothioyl)tetrahydropyridine-1(2H)-carboxylate Material Safety Data SheetSynonym:1-(t-Butyloxycarbonyl)piperidine-4-thiocarboxamidCAS:214834-18-1 Section 1 - Chemical Product MSDS Name:tert-Butyl 4-(aminocarbothioyl)tetrahydropyridine-1(2H)-carboxylate Material Safety Data Sheet Synonym:1-(t-Butyloxycarbonyl)piperidine-4-thiocarboxamid
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTSCAS#Chemical NamecontentEINECS#214834-18-1tert-Butyl 4-(aminocarbothioyl)tetrahy95+%unlistedHazard Symbols: None Listed. Risk Phrases: None Listed.
Section 3 - HAZARDS IDENTIFICATIONEMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Chronic:
Not available.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately.
Notes to Physician:
Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container.
Section 7 - HANDLING and STORAGE
Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 214834-18-1: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: white
Odor: stench
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 122 - 124 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C11H20N2O2S
Molecular Weight: 244
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents, acids, bases, acid chlorides.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 214834-18-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
tert-Butyl 4-(aminocarbothioyl)tetrahydropyridine-1(2H)-carboxylate - Not listed by ACGIH, IARC, or NTP.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
No information available.
IMO
No information available.
RID/ADR
No information available.
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 214834-18-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 214834-18-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 214834-18-1 is not listed on the TSCA inventory.
It is for research and development use only.
SECTION 16 - ADDITIONAL INFORMATION
N/A
|
Safety Information
| Hazard Codes | Xn:Harmful; |
|---|
| Risk Phrases | R22;R36/37/38 |
|---|
| Safety Phrases | S22-S26-S36/37/39 |
|---|
| HS Code | 2933399090 |
|---|
Company Profile
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc.
We are committed to providing high-quality chemical products and comprehensive solutions to meet the diverse needs of the global market.
Our research and development team possesses profound professional knowledge and extensive industry experience, dedicated to developing cutting-edge chemical materials to drive technological progress and industrial development. Our production facilities are equipped with state-of-the-art technology and a stringent quality control system to ensure product consistency and reliability.
As a pioneer in the industry, we not only offer standardized products but also customize chemicals and services according to the specific needs of our customers. Our goal is to become a trusted partner for global customers through continuous technological innovation and superior customer service.
Our Advantage
Quality control
Based on industry norms, customer requirements, and internal quality objectives, we establish clear quality standards. By monitoring the production process in real-time, we ensure that every step conforms to the predetermined quality standards.
Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.
Technological innovation
Our technological innovation is reflected in the development of new materials that are at the leading edge of the industry. These materials not only possess higher performance and lower costs but also enable sustainable use within an environmentally friendly production process.
Competitiveness
Based on rich experience in material development and production, we have established a more scientific cost control system. By ensuring product quality, and through refined management and continuous process optimization, we offer more competitive prices.
Word of mouth
Adhering to the principle of customer first, customer first, and honest service, we have established long-term business relationships with customers and are deeply welcomed and trusted by them.
Rich experience
Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.
Safe and fast delivery
We will arrange shipment of spot products as soon as we receive payment.
Customized products are determined based on the synthesis time of different products.
Excellent pre-sales and after-sales service
Pre sales:
We are committed to providing the most favorable quotes and detailed information about our products and company.
After-sale service:
We assist buyers in customs clearance by providing necessary documents and information.
If there is any dispute over product quality, we are committed to providing the best solution.
Our packaging and shipping
• Packaging:
1kg/bag or bottle, 25kg/drum, 50kg/drum, 200L/drum, 1T/bag or IBC drum, standard export packaging or packaging required by customers.
• Shipping
• Delivery:
Within 7 days after receiving your payment
Contact information
For more details, pls contact us freely.
Email: jiuyitime@fdachem.com
Sincerely hope to establish friendly business relationships with new and old customers, and jointly create a beautiful future for the fine chemical industry!
China
