Sodium thiosulfate, commonly known as hyperbole or baking soda, is a commonly used chemical raw material used as a fixer in the photographic, film and printing industries. Used as a reducing agent in tanning. In the paper and textile industries, it is used to remove residual bleach and as a Chemicalbook agent. Used in medicine as an antidote for cyanide poisoning, etc. In water treatment, it is used as a dechlorination agent and fungicide for drinking water and wastewater; Copper corrosion inhibitor for circulating cooling water; And deoxidizer for boiler water system. It is also used for the treatment of cyanide-containing wastewater
Used for manufacturing fixing powder and preparation of fixing agent and desiccant in photographic industry. Used in the tannery industry as a reducing agent for dichromate in tanning leather. Usage Sodium thiosulfate, commonly known as baking soda, is an important inorganic chemical raw material. In the pesticide can be used for synthetic insecticides insecticide double, insecticide single, insecticide Dan and so on. Use as an analytical reagent, mordant and fixing agent A new type of insecticide, with gastric toxicity, internal absorption and contact effects. It can control rice trichoborer, dichoborer, rice leaf roller, rice thrips and vegetable and fruit tree pests. It has internal absorption conduction and strong touch and stomach toxicity. It can control various Chemicalbook pests of rice and vegetable and fruit tree pests. It can be used as a chlorinator after bleaching of paper pulp and cotton fabrics. Pharmaceutical industry used as detergents, disinfectants for analytical reagents. Reference reagent. A reducing agent. Chlorine remover. Photographic fixer. Uses chelating agent; Antioxidants; Anti-browning agent. The dechlorination of ice with tetracyclic chloride (or chlortetracycline) is as follows: $S001$S contains a lot of chlorine, which will cause the side reaction of sulfur ionization, so it is only used when the chlorine concentration is very thin. When used as a chelating agent for salt, the limit is less than 0.1%.