PRODUCT INFORMATION
Names
Name | Sodium 1-propanesulfonate |
---|
Synonym | More Synonyms |
---|
Chemical & Physical Properties
Melting Point | 250 °C (dec.)(lit.) |
---|
Molecular Formula | C3H7NaO3S |
---|
Molecular Weight | 146.141 |
---|
Exact Mass | 146.001358 |
---|
PSA | 65.58000 |
---|
LogP | 1.02240 |
---|
Water Solubility | soluble |
---|
MSDS
Name:1-Propanesulfonic acid sodium salt monohydrate HPLC grade 99+% Material Safety Data SheetSynonym:CAS:14533-63-2 Section 1 - Chemical Product MSDS Name:1-Propanesulfonic acid sodium salt monohydrate HPLC grade 99+% Material Safety Data Sheet Synonym: Section 2 - COMPOSITION, INFORMATION ON INGREDIENTSCAS#Chemical NamecontentEINECS#14533-63-21-Propanesulfonic acid sodium salt mon99+%238-564-7Hazard Symbols: None Listed. Risk Phrases: None Listed. Section 3 - HAZARDS IDENTIFICATIONEMERGENCY OVERVIEW Not available. Potential Health Effects Eye: May cause eye irritation. Skin: May cause skin irritation. May be harmful if absorbed through the skin. Ingestion: May cause irritation of the digestive tract. May be harmful if swallowed. Inhalation: May cause respiratory tract irritation. May be harmful if inhaled. Chronic: Not available.
Section 4 - FIRST AID MEASURES Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Ingestion: Get medical aid. Wash mouth out with water. Inhalation: Remove from exposure to fresh air immediately. Notes to Physician: Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container.
Section 7 - HANDLING and STORAGE Handling: Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Storage: Store in a cool, dry place. Store in a tightly closed container.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Use adequate ventilation to keep airborne concentrations low. Personal Protective Equipment Eyes: Not available. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid Appearance: Not available. Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: Not available. Autoignition Temperature: Not available. Flash Point: Not available. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Soluble. Specific Gravity/Density: Molecular Formula: C3H7NaO3S Molecular Weight: 146.097
Section 10 - STABILITY AND REACTIVITY Chemical Stability: Stable under normal temperatures and pressures. Conditions to Avoid: Incompatible materials, light, excess heat. Incompatibilities with Other Materials: Strong oxidizing agents. Hazardous Decomposition Products: Carbon monoxide, oxides of sulfur, carbon dioxide, metallic oxides. Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 14533-63-2 unlisted. LD50/LC50: Not available. Carcinogenicity: 1-Propanesulfonic acid sodium salt monohydrate - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA. See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA No information available. IMO No information available. RID/ADR No information available.
Section 15 - REGULATORY INFORMATION
European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: Not available. Risk Phrases: Safety Phrases: S 24/25 Avoid contact with skin and eyes. WGK (Water Danger/Protection) CAS# 14533-63-2: No information available. United Kingdom Occupational Exposure Limits Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 14533-63-2 is not listed on Canada's Ingredient Disclosure List. Exposure Limits US FEDERAL TSCA CAS# 14533-63-2 is not on the TSCA Inventory. It is a hydrate and exempt from TSCA Inventory requirements (40CFR720.3(u)(2)).
SECTION 16 - ADDITIONAL INFORMATION N/A
|
Safety Information
Hazard Codes | Xi:Irritant; |
---|
Risk Phrases | R36/37/38 |
---|
Safety Phrases | S37/39-S26 |
---|
WGK Germany | 3 |
---|
HS Code | 2904100000 |
---|
Precursor & DownStream
Precursor 2 |
|
---|
|
DownStream 3 |
|
---|
CAS#:10147-36-1 1-Propanesulfon...
CAS#:1561-97-3 2-hydroxy-propa...
CAS#:15909-83-8 1-Propanesulfon...
|
Customs
HS Code | 2904100000 |
---|
Summary | 2904100000 derivatives containing only sulpho groups, their salts and ethyl esters。Supervision conditions:None。VAT:17.0%。Tax rebate rate:9.0%。MFN tariff:5.5%。General tariff:30.0% |
---|
Synonyms
1-Propanesulfonic acid, sodium salt (1:1) |
Sodium propane-1-sulfonate |
1-Propanesulfonic acid,sodium salt |
Sodium 1-propanesulfonate |
1-Propanesulfonic acid |
1-Propanesulfonic Acid Sodium Salt |
sodium,propane-1-sulfonate |
EINECS 238-564-7 |
MFCD00062546 |
Company Profile
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions.
Our Company


Our Advantage
Rich experience
Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.
Excellent quality, purity, and competitive price
Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.

Safe and fast delivery
We will arrange shipment of spot products as soon as we receive payment.
Customized products are determined based on the synthesis time of different products.
Excellent pre-sales and after-sales service
Pre sales:
We are committed to providing the most favorable quotes and detailed information about our products and company.
after-sale service:
We assist buyers in customs clearance by providing necessary documents and information.
If there is any dispute over product quality, we are committed to providing the best solution.
• Packaging:
1kg/bag, 25kg/drum, 50kg/drum, 180kg/drum, 200kg/drum, 1T/bag/drum, standard export packaging or packaging required by customers


• Shipping

• Delivery:
Within 7 days after receiving your payment
Contact information
For more details, pls contact us freely.
Contact name: Tina
Email address: Tina@fdachem.com
Mob: 86 13213167925
WhatsApp/Skype/Wechat/LINE: 86 15225627621