1/2
(R)-3-amino-1-butanol NEW
- Min. Order1KG
- Purity99%
- Cas No61477-40-5
- Supply Abilityg-kg-tons, free sample is available
- Update time2024-03-23
Product Name | (R)-3-amino-1-butanol |
CAS No | 61477-40-5 |
EC-No | |
Min. Order | 1KG |
Purity | 99% |
Supply Ability | g-kg-tons, free sample is available |
Release date | 2024/03/23 |
1. Materials information
Names
Name | (R)-3-Aminobutan-1-ol |
---|---|
Synonym | More Synonyms |
Chemical & Physical Properties
Density | 0.9±0.1 g/cm3 |
---|---|
Boiling Point | 168.3±13.0 °C at 760 mmHg |
Molecular Formula | C4H11NO |
Molecular Weight | 89.136 |
Flash Point | 55.6±19.8 °C |
Exact Mass | 89.084061 |
PSA | 46.25000 |
LogP | -0.77 |
Vapour Pressure | 0.5±0.7 mmHg at 25°C |
Index of Refraction | 1.446 |
MSDS
Material Safety Data Sheet
Section1. Identification of the substance Product Name:(R)-3-Aminobutan-1-ol Synonyms: Section2. Hazards identification Harmful by inhalation, in contact with skin, and if swallowed. Section3. Composition/information on ingredients. Ingredient name:(R)-3-Aminobutan-1-ol CAS number:61477-40-5 Section4. First aid measures Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists, seek medical attention. Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical attention. Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention. Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention. Section5. Fire fighting measures In the event of a fire involving this material, alone or in combination with other materials, use dry powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus should be worn. Section6. Accidental release measures Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national standards. Respiratory precaution:Wear approved mask/respirator Hand precaution:Wear suitable gloves/gauntlets Skin protection:Wear suitable protective clothing Eye protection:Wear suitable eye protection Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container for disposal. See section 12. Environmental precautions: Do not allow material to enter drains or water courses. Section7. Handling and storage Handling:This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet. Store in closed vessels, refrigerated. Storage: Section8. Exposure Controls / Personal protection Engineering Controls: Use only in a chemical fume hood. Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles. General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse. Section9. Physical and chemical properties Appearance:Not specified Boiling point:No data No data Melting point: Flash point:No data Density:No data Molecular formula:C4H11NO Molecular weight:89.1 Section10. Stability and reactivity Conditions to avoid: Heat, flames and sparks. Materials to avoid: Oxidizing agents. Possible hazardous combustion products: Carbon monoxide, nitrogen oxides. Section11. Toxicological information No data. Section12. Ecological information No data. Section13. Disposal consideration Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations. Section14. Transportation information Non-harzardous for air and ground transportation. Section15. Regulatory information No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313. SECTION 16 - ADDITIONAL INFORMATION N/A |
Safety Information
Hazard Codes | Xi |
---|---|
HS Code | 2922199090 |
Synthetic Route
Previous 1/3 Next
~89% (3R)-3-Amino-1-... CAS#:61477-40-5 |
Literature: BASF SE Patent: US2011/275855 A1, 2011 ; Location in patent: Page/Page column 6-7 ; |
~% (3R)-3-Amino-1-... CAS#:61477-40-5 |
Literature: WO2006/76595 A1, ; Page/Page column 169-170 ; WO 2006/076595 A1 |
~60% (3R)-3-Amino-1-... CAS#:61477-40-5 |
Literature: Kuriyama, Wataru; Ino, Yasunori; Ogata, Osamu; Sayo, Noboru; Saito, Takao Advanced Synthesis and Catalysis, 2010 , vol. 352, # 1 p. 92 - 96 |
Precursor & DownStream
Precursor 9 | Previous 1/3 Next |
---|---|
DownStream 0 |
Customs
HS Code | 2922199090 |
---|---|
Summary | 2922199090. other amino-alcohols, other than those containing more than one kind of oxygen function, their ethers and esters; salts thereof. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0% |
2. Packaging of materials
For powders: normal is 25kgs/Drum or bag, or larger/smaller package as request.
For liquids: normal 25kgs/drum, 180-300kgs/bucket, or IBC, determined by the nature of the product.
Or smaller package 1kg/bottle, 10kgs/bottle as request.
3. Shipping & Delivery
By Express
Provide door to door service
Suitable for goods under 50kg
Delivery: 3-7 days
Cost: low cost
By Air
Provide airport to airport service
Suitable for goods over 50kg
Delivery: 3-14 days
Cost: high cost
By Sea
Provide seaport to seaport service
Suitable for goods over 100kg
Delivery: 2-45 days
Cost: low cost
4. Contact information
For more details, pls contact us freely.
Email address: Tina@fdachem.com
Mob: 86 15225627621
WhatsApp/Skype/Wechat/LINE: 86 15225627621
Company Profile Introduction
Henan Fengda Chemical Co., Ltd. is located in the High-tech Development Zone of Henan Province. Specializing in the production and sales of various fine chemical products required for industrial production, including chemical raw materials, organic raw materials, petrochemicals, chemical reagents, solvents, catalysts, and additives, etc.