1/2
N,N'-Dimethylquinacridone NEW
- Min. Order0.01KG
- Purity99%
- Cas No19205-19-7
- Supply Abilityg-kg-tons, free sample is available
- Update time2025-06-21
China
| Product Name | N,N'-Dimethylquinacridone |
| CAS No | 19205-19-7 |
| EC-No | |
| Min. Order | 0.01KG |
| Purity | 99% |
| Supply Ability | g-kg-tons, free sample is available |
| Release date | 2025/06/21 |
N,N'-Dimethylquinacridone
 N,N'-Dimethylquinacridone structure | Common Name | N,N'-Dimethylquinacridone | ||
|---|---|---|---|---|
| CAS Number | 19205-19-7 | Molecular Weight | 340.375 | |
| Density | 1.3±0.1 g/cm3 | Boiling Point | 576.7±50.0 °C at 760 mmHg | |
| Molecular Formula | C22H16N2O2 | Melting Point | 286 °C (dec.)(lit.) | |
| MSDS | ChineseUSA | Flash Point | 274.5±22.5 °C | |
| Purity | Quantity | Budget | Inquiry |
|---|
Properties
Articles8
Spectrum
Names
| Name | 5,12-dimethylquinolino[2,3-b]acridine-7,14-dione |
|---|---|
| Synonym | More Synonyms |
Chemical & Physical Properties
| Density | 1.3±0.1 g/cm3 |
|---|---|
| Boiling Point | 576.7±50.0 °C at 760 mmHg |
| Melting Point | 286 °C (dec.)(lit.) |
| Molecular Formula | C22H16N2O2 |
| Molecular Weight | 340.375 |
| Flash Point | 274.5±22.5 °C |
| Exact Mass | 340.121185 |
| PSA | 44.00000 |
| LogP | 3.44 |
| Vapour Pressure | 0.0±1.6 mmHg at 25°C |
| Index of Refraction | 1.686 |
MSDS
Section I.Chemical Product and Company Identification Chemical Name N.N'-Dimethylquinacridone Portland OR Synonym5,12-Dimethylaquin[2,3-b]acridine-7,14-dione C22H16N2O2 Chemical Formula CAS Number19205-19-7 Section II.Composition and Information on Ingredients Chemical NameCAS Number Percent (%)TLV/PELToxicology Data N.N'-Dimethylquinacridone19205-19-7---------- Not available.Not available. Section III. Hazards Identification Acute Health EffectsNo specific information is available in our data base regarding the toxic effects of this material for humans. However, exposure to any chemical should be kept to a minimum. Skin and eye contact may result in irritation. May be harmful if inhaled or ingested. Always follow safe industrial hygiene practices and wear proper protective equipment when handling this compound. CARCINOGENIC EFFECTS : Not available. Chronic Health Effects MUTAGENIC EFFECTS : Not available. TERATOGENIC EFFECTS : Not available. DEVELOPMENTAL TOXICITY: Not available. Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions. Section IV.First Aid Measures Eye ContactCheck for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention. Skin ContactIn case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention. InhalationIf the victim is not breathing, perform mouth-to-mouth resuscitation. Loosen tight clothing such as a collar, tie, belt or waistband. If breathing is difficult, oxygen can be administered. Seek medical attention if respiration problems do not improve. IngestionINDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not reenter the mouth and throat. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic material was ingested; the absence of such signs, however, is not conclusive. Section V.Fire and Explosion Data Auto-IgnitionNot available. FlammabilityMay be combustible at high temperature. Flammable Limits Flash PointsNot available. Not available. Combustion ProductsThese products are toxic carbon oxides (CO, CO 2), nitrogen oxides (NO, NO2). Fire Hazards Not available. Risks of explosion of the product in presence of mechanical impact: Not available. Explosion Hazards Risks of explosion of the product in presence of static discharge: Not available. Fire Fighting Media SMALL FIRE: Use DRY chemical powder. and InstructionsLARGE FIRE: Use water spray, fog or foam. DO NOT use water jet. Consult with local fire authorities before attempting large scale fire-fighting operations. Continued on Next Page N.N'-Dimethylquinacridone Section VI.Accidental Release Measures Spill CleanupLight Sensitive Material. InstructionsUse a shovel to put the material into a convenient waste disposal container. Finish cleaning the spill by rinsing any contaminated surfaces with copious amounts of water. Consult federal, state, and/or local authorities for assistance on disposal. Section VII. Handling and Storage Handling and StorageLIGHT SENSITIVE. Keep away from heat. Mechanical exhaust required. When not in use, tightly seal the container and store in a dry, cool place. Avoid excessive heat and light. Do not breathe dust. Information Always store away from incompatible compounds such as oxidizing agents. Section VIII. Exposure Controls/Personal Protection Engineering ControlsUse process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. Personal ProtectionSplash goggles. Lab coat. Dust respirator. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product. Be sure to use a MSHA/NIOSH approved respirator or equivalent. Exposure LimitsNot available. Section IX. Physical and Chemical Properties Solubility Physical state @ 20°CSolid. (Yellowish-Red Powder)Not available. Not available. Specific Gravity Molecular Weight340.37Partition CoefficientNot available. Boiling PointNot available.Vapor PressureNot applicable. Melting Point285.8°C (546.4°F)Vapor DensityNot available. Not available.VolatilityNot available. Refractive Index Critical TemperatureOdorNot available. Not available. Not available.Not available. ViscosityTaste Section X.Stability and Reactivity Data This material is stable if stored under proper conditions. (See Section VII for instructions) Stability Conditions of Instability Avoid excessive heat and light. Incompatibilities Reactive with strong oxidizing agents. Section XI. Toxicological Information RTECS NumberNot available. Routes of ExposureEye Contact. Ingestion. Inhalation. Not available. Toxicity Data Chronic Toxic EffectsCARCINOGENIC EFFECTS : Not available. MUTAGENIC EFFECTS : Not available. TERATOGENIC EFFECTS : Not available. DEVELOPMENTAL TOXICITY: Not available. Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions. No specific information is available in our data base regarding the toxic effects of this material for humans. However, Acute Toxic Effects exposure to any chemical should be kept to a minimum. Skin and eye contact may result in irritation. May be harmful if inhaled or ingested. Always follow safe industrial hygiene practices and wear proper protective equipment when handling this compound. Continued on Next Page N.N'-Dimethylquinacridone Section XII.Ecological Information EcotoxicityNot available. Environmental FateNot available. Section XIII. Disposal Considerations Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a Waste Disposal combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. Section XIV. Transport Information DOT ClassificationNot a DOT controlled material (United States). PIN NumberNot applicable. Proper Shipping Name Not applicable. Packing Group (PG)Not applicable. DOT Pictograms Section XV. Other Regulatory Information and Pictograms TSCA Chemical InventoryThis compound is ON the EPA Toxic Substances Control Act (TSCA) inventory list. (EPA) WHMIS Classification Not available. (Canada) EINECS Number (EEC) Not available. EEC Risk StatementsNot available. SECTION 16 - ADDITIONAL INFORMATION N/A |
Safety Information
| Personal Protective Equipment | Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter |
|---|---|
| Hazard Codes | Xn |
| Safety Phrases | S22-S24/25 |
| RIDADR | NONH for all modes of transport |
| WGK Germany | 3 |
| HS Code | 2933990090 |
Synthetic Route
Total: 1 Page Pigment Violet 19 CAS#:1047-16-1  methyl iodide CAS#:74-88-4 ~94% N,N'-Dimethylqu... CAS#:19205-19-7 |
| Literature: Pushkina, L. L.; Dubovaya, L. V.; Shelyapin, O. P.; Shein, S. M. Journal of Organic Chemistry USSR (English Translation), 1984 , vol. 20, p. 1771 - 1775 Zhurnal Organicheskoi Khimii, 1984 , vol. 20, # 9 p. 1939 - 1943 |
Pigment Violet 19 CAS#:1047-16-1  Dimethyl sulfate CAS#:77-78-1 ~92% N,N'-Dimethylqu... CAS#:19205-19-7 |
| Literature: Pushkina, L. L.; Dubovaya, L. V.; Shelyapin, O. P.; Shein, S. M. Journal of Organic Chemistry USSR (English Translation), 1984 , vol. 20, p. 1771 - 1775 Zhurnal Organicheskoi Khimii, 1984 , vol. 20, # 9 p. 1939 - 1943 |
Pigment Violet 19 CAS#:1047-16-1  Methyl benzenes... CAS#:80-18-2 ~92% N,N'-Dimethylqu... CAS#:19205-19-7 |
| Literature: Pushkina, L. L.; Dubovaya, L. V.; Shelyapin, O. P.; Shein, S. M. Journal of Organic Chemistry USSR (English Translation), 1984 , vol. 20, p. 1771 - 1775 Zhurnal Organicheskoi Khimii, 1984 , vol. 20, # 9 p. 1939 - 1943 |
Precursor & DownStream
| Precursor 4 | |
|---|---|
| |
| DownStream 0 | |
Customs
| HS Code | 2933990090 |
|---|---|
| Summary | 2933990090. heterocyclic compounds with nitrogen hetero-atom(s) only. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0% |
Company Profile
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions.
Our Company
Our Advantage
Quality control
Based on industry norms, customer requirements, and internal quality objectives, we establish clear quality standards. By monitoring the production process in real-time, we ensure that every step conforms to the predetermined quality standards.
Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.
Technological innovation
Our technological innovation is reflected in the development of new materials that are at the leading edge of the industry. These materials not only possess higher performance and lower costs but also enable sustainable use within an environmentally friendly production process.
Competitiveness
Based on rich experience in material development and production, we have established a more scientific cost control system. By ensuring product quality, and through refined management and continuous process optimization, we offer more competitive prices.
Word of mouth
Adhering to the principle of customer first, customer first, and honest service, we have established long-term business relationships with customers and are deeply welcomed and trusted by them.
Rich experience
Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.
Safe and fast delivery
We will arrange shipment of spot products as soon as we receive payment.
Customized products are determined based on the synthesis time of different products.
Excellent pre-sales and after-sales service
Pre sales:
We are committed to providing the most favorable quotes and detailed information about our products and company.
After-sale service:
We assist buyers in customs clearance by providing necessary documents and information.
If there is any dispute over product quality, we are committed to providing the best solution.
Our packaging and shipping
• Packaging:
1kg/bag or bottle, 25kg/drum, 50kg/drum, 200L/drum, 1T/bag or IBC drum, standard export packaging or packaging required by customers.
• Shipping
• Delivery:
Within 7 days after receiving your payment
Contact information
For more details, pls contact us freely.
Name: Elin
Email: jiuyitime@fdachem.com
Sincerely hope to establish friendly business relationships with new and old customers, and jointly create a beautiful future for the fine chemical industry!
Company Profile Introduction
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions. With our agile custom synthesis capabilities and responsive supply chain system, our products have gained widespread adoption across Asian markets including Japan, South Korea, Singapore, and Malaysia, while also expanding deeply into Europe and the Americas. We have forged long-term strategic partnerships with numerous leading global enterprises in the sector. "Driving value through technology and earning trust through service" is our core mission. Looking ahead, we will continue to focus on technological breakthroughs and green innovation in new materials, collaborating with partners to build a high-quality industrial ecosystem and provide globally competitive solutions with greater foresight.
You may like
