ChemicalBook Product Catalog Endothall

1/2

Endothall NEW

$2.20 100KG

$6.60 10KG

$8.80 1KG

Min. Order1KG
Purity99%
Cas No145-73-3
Update time2026-04-17

ZHENGZHOU JIUYI TIME NEW MATERIALS CO,.LTD

VIP2Y

China

Chemical Properties

Product Name	Endothall
CAS No	145-73-3
EC-No
Min. Order	1KG
Purity	99%
Release date	2026/04/17

Endothall

Modify Date: 2024-01-07 18:46:00

Endothall structure	Common Name	Endothall
	CAS Number	145-73-3	Molecular Weight	186.16200
	Density	1.431	Boiling Point	350ºC(e)
	Molecular Formula	C8H10O5	Melting Point	144ºC
	MSDS	N/A	Flash Point	190.5ºC

Purity		Quantity		Budget		Inquiry

Use of Endothall

Endothall (Endothal) is a protein phosphatase 2A (PP2A) inhibitor with IC50s of 90 nM and 5 µM for PP2A and PP1, respectively. Endothall can be used as an herbicide. Endothall also is useful in cancer chemotherapy[1].

Properties
Spectrum

Name	endothal
Synonym	More Synonyms

Description	Endothall (Endothal) is a protein phosphatase 2A (PP2A) inhibitor with IC50s of 90 nM and 5 µM for PP2A and PP1, respectively. Endothall can be used as an herbicide. Endothall also is useful in cancer chemotherapy[1].
Related Catalog	Signaling Pathways >> Metabolic Enzyme/Protease >> Phosphatase
In Vitro	Endothall, an organic acid, is the least toxic structural analogue of Cantharidin that still inhibits PP2A[2]. Endothall inhibits preferentially hepatocellular carcinoma (HCC) growth and these new rat hepatocellular carcinoma lines may be useful for further biochemical and pharmacological studies on PP2A inhibitors, and for testing new forms of treatment of hepatic cell carcinomas. The HR-2, HR-3, HR-4, and Zajdela hepatocellular carcinomas are most sensitive to Endothall (IC50 of 1.7, 1.2, 0.9, and 1.7 µg/mL), whereas newborn rat hepatocytes growing exponentially in primary culture (IC50=6.2 µg/mL), rat DHD/K12 colon carcinoma cells (IC50=3.6 µg/mL), or human HT-29 colon carcinoma cells (IC50=4.9 µg/mL) were less sensitive[2]. Endothall inhibits the growth of HCC lines in culture more than that of normal hepatocytes or colon carcinomas, inducing mitotic arrest, followed by cell death. Endothall causes dose- and time-dependent cytostasis specifically in G2/M[2]. Endothall (3 µg/mL) inhibits the cell cycle at G2/M and subsequent apoptotic cell death[2].
In Vivo	Endothall exhibits acute LD50 of 14 mg/kg in mice[2].
References	[1]. Janetti R Signorelli, et al. Protein phosphatases decrease their activity during capacitation: a new requirement for this event. PLoS One. 2013 Dec 2;8(12):e81286. [2]. J P Thièry, et al. Hepatocellular carcinoma cell lines from diethylnitrosamine phenobarbital-treated rats. Characterization and sensitivity to endothall, a protein serine/threonine phosphatase-2A inhibitor. Hepatology. 1999 May;29(5):1406-17.

Density	1.431
Boiling Point	350ºC(e)
Melting Point	144ºC
Molecular Formula	C8H10O5
Molecular Weight	186.16200
Flash Point	190.5ºC
Exact Mass	186.05300
PSA	83.83000
Vapour Pressure	2.88E-09mmHg at 25°C
Index of Refraction	1.568

Endothall MSDS(Chinese)

CHEMICAL IDENTIFICATION

RTECS NUMBER :
RN7875000

CHEMICAL NAME :
7-Oxabicyclo(2.2.1)heptane-2,3-dicarboxylic acid

CAS REGISTRY NUMBER :
145-73-3

LAST UPDATED :
199701

DATA ITEMS CITED :
7

MOLECULAR FORMULA :
C8-H10-O5

MOLECULAR WEIGHT :
186.18

WISWESSER LINE NOTATION :
T55 A AOTJ CVQ DVQ

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

TYPE OF TEST :
LDLo - Lowest published lethal dose

ROUTE OF EXPOSURE :
Oral

SPECIES OBSERVED :
Human - man

DOSE/DURATION :
571 uL/kg

TOXIC EFFECTS :
Cardiac - other changes Kidney, Ureter, Bladder - urine volume decreased Nutritional and Gross Metabolic - metabolic acidosis

REFERENCE :
AJEMEN American Journal of Emergency Medicine. (WB Saunders, Philadelphia, PA) V.1- 1983- Volume(issue)/page/year: 6,509,1988

TYPE OF TEST :
LD50 - Lethal dose, 50 percent kill

ROUTE OF EXPOSURE :
Oral

SPECIES OBSERVED :
Rodent - rat

DOSE/DURATION :
38 mg/kg

TOXIC EFFECTS :
Details of toxic effects not reported other than lethal dose value

REFERENCE :
PCOC** Pesticide Chemicals Official Compendium, Association of the American Pesticide Control Officials, Inc., 1966. (Topeka, KS) Volume(issue)/page/year: -,471,1966

TYPE OF TEST :
LD50 - Lethal dose, 50 percent kill

ROUTE OF EXPOSURE :
Administration onto the skin

SPECIES OBSERVED :
Rodent - rat

DOSE/DURATION :
>1 gm/kg

TOXIC EFFECTS :
Details of toxic effects not reported other than lethal dose value

REFERENCE :
FAATDF Fundamental and Applied Toxicology. (Academic Press, Inc., 1 E. First St., Duluth, MN 55802) V.1- 1981- Volume(issue)/page/year: 7,299,1986

TYPE OF TEST :
LD50 - Lethal dose, 50 percent kill

ROUTE OF EXPOSURE :
Intraperitoneal

SPECIES OBSERVED :
Rodent - mouse

DOSE/DURATION :
14 mg/kg

TOXIC EFFECTS :
Details of toxic effects not reported other than lethal dose value

REFERENCE :
JAFCAU Journal of Agricultural and Food Chemistry. (American Chemical Soc., Distribution Office Dept. 223, POB 57136, West End Stn., Washington, DC 20037) V.1- 1953- Volume(issue)/page/year: 35,823,1987 *** U.S. STANDARDS AND REGULATIONS *** EPA FIFRA 1988 PESTICIDE SUBJECT TO REGISTRATION OR RE-REGISTRATION FEREAC Federal Register. (U.S. Government Printing Office, Supt. of Documents, Washington, DC 20402) V.1- 1936- Volume(issue)/page/year: 54,7740,1989

Hazard Codes	T
Risk Phrases	21-25-36/37/38
Safety Phrases	S45;S36/S37/S39
RIDADR	UN 2811 6.1/PG 2
WGK Germany	1
RTECS	RN7875000
Packaging Group	II
Hazard Class	6.1(a)
HS Code	2932190013

Company Profile

Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc.

We are committed to providing high-quality chemical products and comprehensive solutions to meet the diverse needs of the global market.

Our research and development team possesses profound professional knowledge and extensive industry experience, dedicated to developing cutting-edge chemical materials to drive technological progress and industrial development. Our production facilities are equipped with state-of-the-art technology and a stringent quality control system to ensure product consistency and reliability.

As a pioneer in the industry, we not only offer standardized products but also customize chemicals and services according to the specific needs of our customers. Our goal is to become a trusted partner for global customers through continuous technological innovation and superior customer service.

Our Company

Our Advantage

Quality control

Based on industry norms, customer requirements, and internal quality objectives, we establish clear quality standards. By monitoring the production process in real-time, we ensure that every step conforms to the predetermined quality standards.

Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.

Technological innovation

Our technological innovation is reflected in the development of new materials that are at the leading edge of the industry. These materials not only possess higher performance and lower costs but also enable sustainable use within an environmentally friendly production process.

Competitiveness

Based on rich experience in material development and production, we have established a more scientific cost control system. By ensuring product quality, and through refined management and continuous process optimization, we offer more competitive prices.

Word of mouth

Adhering to the principle of customer first, customer first, and honest service, we have established long-term business relationships with customers and are deeply welcomed and trusted by them.

Rich experience

Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.