Product Overview:
The product is a polymer block compound formed by polymerization of propylene oxide and ethylene oxide with resin as starting agent.
This product is oil soluble.It is mainly used for demulsifying and dehydrating all kinds of crude oil.The product has the characteristics of long acting time, clear oil-water interface, fast dehydration and so on.
Technical index:
Project | Indicators |
Appearance | Yellow to reddish brown liquid |
Density(60℃),g/cm3 | 0.95-1.05 |
Closed flash point,℃ | 45~55 |
Active substance content, % | ≥68 |
Features:
The finished demulsifier can be directly injected into the crude oil treatment system by the plunger pump through the dosing device, or injected into the system after the secondary dilution with the solvent. Generally, the dosing amount is 50-500ppm, and the dosing concentration needs to be determined according to the actual situation on site.
Packing and Storage
Packing In 1000kgs net IBC drum
Storage Store the product in a cool, dry and ventilated place, avoid direct sunlight, keep the container sealed to prevent leakage.
The product is valid for two years.
Avoid contact with eyes, skin and clothing. Wear protective equipment when operating. Keep the products away from fire sources.
First-aid:
Skin contact: immediately use absorbent paper or cotton yarn and clean.
Eye contact: immediately lift eyelids, rinse with running water or normal saline for at least 15 minutes, seek medical advice immediately;
Inhalation: leave the scene quickly to fresh air, artificial respiration if necessary, seek medical advice immediately;
Ingestion: gastric lavage with clear water or sodium thiosulfate solution and seek medical advice immediately.
This product is flammable liquid, pay attention to fire prevention. Emergency treatment of fire leakage:
Spray water to keep the container on the fire site cool until the end of the fire extinguishing.
During the fire extinguishing operation, you must stand in the upper tuyere and wear respiratory protective mask.
Extinguishing agent: soluble foam, dry powder, carbon dioxide, sand.
If a small area of leakage should be buried with soil, if a large area of leakage, it should be transferred in time and treated according to relevant environmental protection requirements.