High Temperature Refractory Silicon Carbide Sagger Silicon Carbide Graphite Crucible for MeltingProducts Description of Silicon Carbide Graphite Crucible
Our silicon carbide crucible uses an integrated die-casting process, which has better high temperature resistance and longer life than ordinary crucibles, while ensuring good thermal conductivity. On this basis, our crucible is made of selected raw materials, and the unique surface anti-oxidation process improves stability and delays corrosion, ensuring that the metal is not contaminated by graphite crucibles.
Silicon carbide crucible are suitable for melting aluminum, copper, gold, silver and other non-ferrous metals, and are exported to many foreign countries and have gained a good reputation.
Silicon Carbide Graphite Crucible advantage
Silicon carbide sagger produced by Rongsheng Group have the characteristics of good flexibility, not easy to crack, and long service life, and also the large capacity of the sagger increases the output, guarantees the quality, saves labor and lots of costs.
The company has successively supplied customers in more than 60 countries. Through our company's continuous improvement of products and strict control of the production process, the stability of product quality has been improved, so that customers can get real benefits and have won unanimous praise from users.
Silicon Carbide Graphite Crucible Technical Data
No. | Particulars | Particulars |
1 | SiC(%) | ≥85% |
2 | SiO2(%) | ≤10% |
3 | Fe2O3(%) | <1% |
4 | Bulk Density in g/cm³ | ≥2.60 |
5 | Cold Crushing Strength(MPa) | ≥100 |
6 | Apparent Porosity(%) | ≤18 |
7 | Refractoriness,(°C) | ≥1700 |
Silicon Carbide Graphite Crucible Instructions for use
1,Store crucibles in a dry , warm place or wooden palate
2,Do not stock inside another
3,Do not roll crucibles
4,Use creramic fiber blanket to seal , interspace of cover and sides of furnace
5,Use locating bricks in tilting furnaces,to interspace of expansion
6,Tangential fire around crucible
7,Add flux after metal is molten
8,Avoid premature crucible failure by ensuring that the furnace drain hole is sealed
9,For lift-out ,tongs must be placed on lower third crucible . fit tongs evenly on both side
10,Check for cracks or other damage during transporting before use
11,Base block must be flat , larger than crucible bottom and centered
12,Use tongs and ingots should be placed carefully into the crucible
China
