DMSO Methyl sulfoxide 67-68-5 Dimethyl sulfoxide 67-68-5 Manufacturer High quality Best price In stock

Product no. chemwillDMSO1006

DMSO  Methyl sulfoxide  67-68-5 Dimethyl sulfoxide  67-68-5 Manufacturer High quality Best price In stock

Dimethyl sulfoxide  67-68-5  In stock DMSO  Methyl sulfoxide  67-68-5

​

Dimethyl sulfoxide  CAS 67-68-5  In stock DMSO  Methyl sulfoxide  Sulfinylbis (methane)

67-68-5

CAS 67-68-5

Dimethylsulfoxide; Methyl sulfoxide; Sulfinylbis (methane); DMSO

Product Name:    Methyl sulfoxide
Synonyms:    
Dimethyl sulfoxide; DMSO; Methyl sulphoxide; methyl sulfoxide B&J brand 1 L; methyl sulfoxide absolute over molecular sieve (H2O <0.01%); Diemthyl Sulfoxide; Dimethyl Sulfoxide BP; Dimethyl sulphoxide; DMSO/NMP (Dimethylsulfoxide/1-Methyl-2-pyrrolidone); DMSO; Dimethylsulfoxide Sulfinylbis
CAS RN.:    
67-68-5
EINECS:    200-664-3
Molecular Weight:    78.12
Molecular Formula:    C2H6OS
Density:    1.1
Melting Point(℃):    18.4-19.0℃
Boiling Point(℃):    189℃
Flash Point(℃):    95℃
refractive_index:    1.477-1.48

Dimethyl sulfoxide (DMSO) is an organosulfur compound with the formula (CH3)2SO. This colorless liquid is an important polar aprotic solvent that dissolves both polar and nonpolar compounds and is miscible in a wide range of organic solvents as well as water. It has a relatively high melting point. DMSO has the unusual property that many individuals perceive a garlic-like taste in the mouth after contact with the skin.
In terms of chemical structure, the molecule has idealized Cs symmetry. It has a trigonal pyramidal molecular geometry consistent with other three-coordinate S(IV) compounds, with a nonbonded electron pair on the approximately tetrahedral sulfur atom.
Basic Info
Chemical Name    Dimethyl sulfoxide
Synonyms    
Methane, sulfinylbis-;
(Methylsulfinyl)methane;
CAS No.    67-68-5
Molecular Formula    C2H6OS
Molecular Weight    78.13340
PSA    36.28000
LogP    0.86040
Properties
Appearance & Physical State    colorless liquid
Density    1.1
Boiling Point    189ºC
Melting Point    18.4-19.0ºC
Freezing Point    18.4℃
Flash Point    95ºC
Refractive Index    1.477-1.48
Stability    Stable. Incompatible with a very wide range of materials, including acid chlorides, strong acids, strong oxidizing agents, strong reducing agents, phosphorus halides, moisture, copper wool + trichloroacetic acid. Reacts violently with a number of materials
Storage Condition    Store at RT.
Vapor Density    2.7 (vs air)
Vapor Pressure    0.42 mm Hg ( 20 °C)
Safety Info
RTECS    PV6210000
Safety Statements    S26-S37/39
HS Code    29309070
WGK Germany    1
Risk Statements    R36/37/38
Hazard Codes    Xi

Dimethyl sulfoxide Basic information
Overview Method of purification and water removal Identification and detection methods Reference quality standards Toxicity Limited use Recovery process Chemical Properties Uses Production method
Product Name:    Dimethyl sulfoxide
Synonyms:    Dromisol;Durasorb;Gamasol 90;gamasol90;Herpid;Hyadur;Infiltrina;Kemsol
CAS:    67-68-5
MF:    C2H6OS
MW:    78.13
EINECS:    200-664-3
Product Categories:    Pharmaceutical Intermediates;INORGANIC & ORGANIC CHEMICALS;Organics;Analytical Chemistry;Solvents for HPLC & Spectrophotometry;Serum-free Media;Stem Cell Biology;Cell Biology;Cell Signaling and Neuroscience;Core Bioreagents;Cryopreservation;General Reagents;Research Essentials;Apoptosis and Cell Cycle;Life Science Reagents for Nucleic Acid Purification;Life Science Reagents for Protein Expression and Purification;Other Apoptosis Related Reagents;Biostabilization Agents;PCR Optimization;Stabilization of Biomolecules;Biochemicals and Reagents;Life Science Reagents for PCR;Molecular Biology;PCR Reaction Components;PCR/Amplification;Plant Biotechnology;Plant Growth Regulators;Plant Tissue Culture;Primary Human Cell Culture;Specialty Media Systems;-;Hepatocytes;Biotech;Biotech Solvents;Life Science Reagents for Northern and Southern Blotting;Products;Returnable Containers;Sure/Seal Bottles;DMSO - Dimethyl sulfoxide;Molecular Biology Reagents;β;Analytical and Industrial Enzymes;and Substrates;Universal Solvent;Solvents for Spectrophotometry;Sulfur Compounds (for Synthesis);Synthetic Organic Chemistry;Dimethyl Sulfoxide (DMSO);Anhydrous Solvents;Solvent by Application;Solvent by Type;Solvents;Plastic Bottles;Analytical Reagents;Analytical Reagents for General Use;Analytical/Chromatography;C-D;Puriss p.a. ACS;Solvent Bottles;Solvent Packaging Options;BRDU Cell Proliferation Assay Reagents;Cell Culture;Cell Freezing Media and Reagents;Chemical ER Chaperones;Endoplasmic Reticulum Stress;General Stem Cell Biology;Hybridoma Platform;Hybridoma Reagents;Life Science Reagents for Cell Culture;Reagents and Supplements;Biochemicals;Enzymes;-Glucuronidase;-Glucuronidase Drug Analysis Bundle;Inhibitors;Life Science Reagents for RNAi;Anhydrous;ACS and Reagent Grade Solvents;ACS Grade;ACS Grade Solvents;Amber Glass Bottles;Composite Drums;Drums Product Line;Semi-Bulk Solvents;VerSA-Flow Products;CHROMASOLV Plus;Chromatography Reagents &;HPLC &;HPLC Plus Grade Solvents (CHROMASOLV);HPLC/UHPLC Solvents (CHROMASOLV);NOWPak Products;UHPLC Solvents (CHROMASOLV)
Mol File:    67-68-5.mol
Dimethyl sulfoxide Structure
Dimethyl sulfoxide Chemical Properties
Melting point     18.4 °C
Boiling point     189 °C(lit.)
density     1.100 g/mL at 20 °C
vapor density     2.7 (vs air)
vapor pressure     0.42 mm Hg ( 20 °C)
refractive index     n20/D 1.479(lit.)
FEMA     3875 | METHYLSULFINYLMETHANE
Fp     192 °F
storage temp.     Store at RT.
solubility     H2O: miscible (completely)
form     liquid (temperature dependent)
pka    35(at 25℃)
color     clear colorless
Relative polarity    0.444
Odor    Mild garlic odor
explosive limit    1.8-63.0%(V)
Water Solubility     Soluble in water, methanol, acetone, ether, benzene, chloroform.
FreezingPoint     18.4℃
Sensitive     Hygroscopic
λmax    λ: 285 nm Amax: ≤0.20
λ: 295 nm Amax: ≤0.20
Merck     14,3259
JECFA Number    507
BRN     506008
Stability:    Stable. Incompatible with a very wide range of materials, including acid chlorides, strong acids, strong oxidizing agents, strong reducing agents, phosphorus halides, moisture, copper wool + trichloroacetic acid. Reacts violently with a number of materials - consult a full data sheet before use. Hygroscopic.
InChIKey    IAZDPXIOMUYVGZ-UHFFFAOYSA-N
CAS DataBase Reference    67-68-5(CAS DataBase Reference)
NIST Chemistry Reference    Dimethyl sulfoxide(67-68-5)
EPA Substance Registry System    Methane, sulfinylbis-(67-68-5)
Safety Information
Hazard Codes     Xi
Risk Statements     36/37/38
Safety Statements     24/25-37/39-26-36-23
RIDADR     NA 1993 / PGIII
WGK Germany     1
RTECS     PV6210000
F     3
Autoignition Temperature    215 °C
TSCA     Yes
HS Code     29309070

Dimethyl sulfoxide (abbreviated DMSO) is a sulfur-containing organic compound; molecule formula: (CH3) 2SO; It exhibits as colorless, odorless, hygroscopic and flammable transparent liquid at room temperature. It has both high polarity as well as high-boiling point. It also has aprotic and water-miscible characteristics. It has low toxicity, good thermal stability, and is not miscible with paraffin. It is soluble in water, ethanol, propanol, ether, benzene and chloroform and many other kinds of organic substance and is called as the "universal solvent." It is a common organic solvent which has the strongest dissolving ability. It can dissolve most the organic compounds including carbohydrates, polymers, peptides, as well as many inorganic salts and gases. It can dissolve certain amount solute whose weight is equals to 50-60% of itself (other common solvents usually only dissolve 10-20%), so it is very important in the sample management as well as high-speed screening of drugs. Under certain conditions, contact between dimethyl sulfoxide and chloride can even lead to explosive reaction.
dimethyl sulfoxide is widely used as solvents and reagents, particularly as the processing reagent and spinning solvent at the reaction of acrylonitrile polymerization used for polyurethane synthesis and the spinning solvent. It can also be used as the synthetic solvent for polyamide, polyimide and polysulfone resin as well as the extraction solvents for aromatic hydrocarbon and butadiene extraction solvents and solvents for synthesizing chlorofluoroaniline. In addition, dimethyl sulfoxide can also be directly used as the raw material or carrier of some drug in the pharmaceutical industry. dimethyl sulfoxide itself has various effects such as anti-inflammatory, analgesic, diuretic, and sedative, and thus also being known as "panacea" which is usually as the active ingredient of analgesic medication being added to the drug. It also has special properties of easy penetration through the skin, resulting in personnel feeling of oyster-like flavor. The dimethyl sulfoxide solution of sodium cyanide can cause cyanide poisoning through skin contact while dimethyl sulfoxide itself has a relative low toxicity. dimethyl sulfoxide is widely applied as the extraction agent in a lot of chemical and pharmaceutical companies. However, because of its higher boiling point, it causes very high operating temperatures and further causes the coking of materials, thus affecting the recycling of dimethyl sulfoxide and further cleaning of the equipments as well as resulting in increased energy consumption. Therefore, the recycling of dimethyl sulfoxide has become a bottleneck as its further wide application as extraction agent.
The above information is edited by the Chemicalbook of Dai Xiongfeng.
Method of purification and water removal    dimethyl sulfoxide can be mixed with water and can be placed for long term storage and drying through molecular sieve. Further apply it to vacuum distillation and collect the fraction of 76 °C/1600Pa (12mmHg). Upon distillation, keep the temperatures at below 90 °C; otherwise it will result in disproportionation reaction which generates dimethyl sulfone and dimethyl sulfide. It may also be dried through calcium oxide, calcium hydroxide, barium oxide and barium sulfates and then distilled under reduced pressure. It may also be purified through partially crystallization. It can lead to explosion when mixing the dimethyl sulfoxide with certain substance such as sodium hydride, periodic acid or magnesium perchlorate, and thus should be paid attention.

It is colorless liquid, and is hygroscopic. It is almost odorless with a bitter taste. It can be dissolved in water, ethanol, acetone, ether, benzene and chloroform.
Uses    1. It can be used for the extraction of arene, also as the reaction medium used for resins and dyes, and applied to acrylic polymerization and spinning solvent.
2. It can be used as an organic solvent, reaction medium and the intermediates of organic synthesis. It is highly versatile. This product has a highly selective extraction capacity, and can be used as the polymerization and condensation solvent of acrylic resin and polysulfone resin, as the polymerization and spinning solvent of polyacrylonitrile and cellulose acetate, as the extraction solvent for separating alkanes and arenes, and as the reaction medium for the arenes, butadiene extraction, acrylic fiber, plastic solvents, organic and synthetic dyes, and pharmaceuticals industries. In the field of medicine, dimethyl sulfoxide has anti-inflammatory and analgesic effect with a strong capability of penetration through the skin, and thus being able to dissolve certain drugs and boost their penetration into the human body to achieve the therapeutic purposes. Taking this carrier property of dimethyl sulfoxide can make it be used as pesticide additives. Add a small amount of dimethyl sulfoxide in some pesticides can facilitate the penetration of pesticides into the plant in order to improve the efficacy. dimethyl sulfoxide can also be used as the dye solvent, dye removing agent, and dye carrier for the synthetic fibers. It can also be used as the absorbent of recycling acetylene and sulfur dioxide and also the modifiers of synthetic fiber, antifreeze agent and the capacitor dielectric, brake oil, and extractant of the rare metals.
3. It can be used as analytic solvents and fixing agent of gas chromatography as well as the solvent for analyzing UV spectra.
Production method    dimethyl sulfoxide is generally made by using dimethyl sulfide oxidation method. They have different production processes due to the different oxidants and oxidation types. 1. Methanol carbon disulfide method; take carbon disulfide and methanol as raw materials and use γ-Al2O3 as the catalyst; first synthesize the dimethyl sulfide, then have oxidation reaction with nitrogen dioxide (or nitrate) to obtain dimethyl sulfoxide. 2. The hydrogen peroxide method: take acetone as the buffer medium to have dimethyl sulfide be reacted with hydrogen peroxide. This method of dimethyl sulfoxide synthesis has a relative high cost and thus is suitable for large-scale production. 3. The method of nitrogen dioxide: have methanol and hydrogen sulfide dimethyl sulfide reacted in the catalysis of γ-alumina to obtain dimethyl sulfide; have sulfate reacted with sodium nitrite to generate nitrogen dioxide; dimethyl sulfide has gas-liquid phase reaction with nitrogen dioxide at 60-80 °C to produce crude dimethyl sulfoxide. Sometimes people also use oxygen for direct oxidation which also generates the crude dimethyl sulfoxide. Then after vacuum distillation, refine to get the finished product of dimethyl sulfoxide. This method is a relative advanced production method. 4. Dimethyl sulfate method: apply dimethyl sulfate to react with sodium sulfide to obtain dimethyl sulfide; sulfate has reaction with sodium nitrite to generate nitrogen dioxide; dimethyl sulfide is oxidized with nitrogen dioxide to generate the crude dimethyl sulfoxide, and then undergo neutralization and distillation to obtain refined dimethyl sulfoxide product. In addition, the anodic oxidation method can also produce dimethyl sulfoxide via dimethyl sulfide.
Chemical Properties    Dimethyl sulfoxide occurs as a colorless, viscous liquid, or as colorless crystals that are miscible with water, alcohol, and ether. The material hasa slightly bitter taste with a sweet aftertaste, and is odorless, or has a slight odor characteristic of dimethyl sulfoxide.Dimethyl sulfoxide is extremely hygroscopic, absorbing up to 70% of its own weight in water with evolution of heat.
Occurrence    Reported found in apple, raspberry, cabbage, cucumber, onion, tomato, peppermint and spearmint oils, milk, pork liver, beer, rum, cocoa, coffee, black tea, oatmeal, soybean, beetroot, parsnip root, watercress, sweet corn, malt, cooked shrimp and oysters
Uses    DMSO is a polar aprotic solvent used in chemical reactions, in polymerase chain reactions (PCR) and as a cryoprotectant vitrification agent for the preservation of cells, tissues and organs. DMSO is used in cell freezing media to protect cells from ice crystal induced mechanical injury. It is used for frozen storage of primary, sub-cultured, and recombinant heteroploid and hybridoma cell lines; embryonic stem cells (ESC), and hematopoietic stem cells. DMSO is frequently used in the combinations with BSA or fetal bovine serum (FBS).
Uses    Human and animal cell lines grown in culture are generally stored frozen. Freezing protects the cell line from changes due to genetic drift and minimizes risk of contamination. Liquid nitrogen used in conjunction with a cryoprotective agent such as DMSO is a widely used method for preserving cells. Without the presence of a cryoprotective agent, freezing is lethal to most mammalian cells. Damage is caused by mechanical injury by ice crystals, concentration of electrolytes, pH changes, and denaturation of proteins. These lethal effects are minimized by adding a cryoprotective agent which lowers
Uses    Dimethyl sulfoxide (1-10%) has been shown to accelerate strand renaturation and is believed to give the nucleic acid thermal stability against depurination. As a PCR cosolvent, DMSO may help improve yields, especially in long PCR.
Uses    A polar aprotic solvent used in polymerase chain reactions (PCR) and as a cryoprotectant vitrification agent for the preservation of cells, tissues and organs.
Uses    Suitable for HPLC, spectrophotometry, environmental testing
Uses    Solvent for many organic Compounds including fats, carbohydrates, dyes, resins, and polymers. In organic reactions. As antifreeze or hydraulic fluid when mixed with water. To cryopreserve and store cultured cells.

Dimethyl sulfoxide Preparation Products And Raw materials
Preparation Products    [6-(1H-PYRAZOL-1-YL)PYRIDIN-3-YL]METHYLAMINE-->6-(1H-PYRAZOL-1-YL)NICOTINONITRILE-->4-(IMIDAZOL-1-YL)PHENOL-->5-Hydroxyanthranilic acid-->4-(1-METHYLPIPERIDIN-4-YLOXY)-3,5-DICHLOROBENZENAMINE-->4-(2-(DIMETHYLAMINO)ETHOXY)-3,5-DICHLOROBENZENAMINE-->4-(3-(DIMETHYLAMINO)PROPOXY)-3,5-DICHLOROBENZENAMINE-->5-Fluoro-2-oxindole-->3,5-DIMETHOXYPHENYLACETONITRILE-->5-Bromo-3-nitro-2-pyridinol-->4'-Phenoxyacetophenone-->3-PHENOXYANILINE-->(6-(1H-Pyrazol-1-yl)pyridin-3-yl)methanol-->Piperonyloyl chloride-->1-METHYL-4-(3-NITROPHENYL)PIPERAZINE-->4-Phenoxyphenol-->Ethyl 2,3-dicyanopropionate-->DIMEPIPERATE-->2-MORPHOLINOBENZOIC ACID-->1-(3-CYANOBENZYL)PIPERAZINE-->ETHYL 3-AMINOBENZOFURAN-2-CARBOXYLATE-->3-(1H-PYRAZOL-1-YL)ANILINE-->N-METHYL-6-(1H-PYRAZOL-1-YL)NICOTINAMIDE-->4-Piperazinobenzonitrile-->(4-FLUOROPHENOXY)ACETYL CHLORIDE-->5-METHOXY-2-METHYLPYRIDINE-->Rimantadine-->6-(1H-PYRAZOL-1-YL)NICOTINIC ACID-->4-MORPHOLINOBENZYLAMINE-->3-CHLOROPHENOXYACETYL CHLORIDE-->3-(4-Methylpiperazin-1-yl)aniline-->Methyl 6-(1H-pyrazol-1-yl)pyridine-3-carboxylate-->Levamisole-->Thiane-->2,4-Difluoro-3,5-dichloronitrobenzene-->A-(BROMOMETHYL)-A-BUTYL4-CHLOROBENZENEACETONITRILE-->Benzofluorfen-->1,8-Octanedinitrile-->Clomipramine hydrochloride-->Methyl sulfone
Raw materials    Methanol-->Carbon disulphide-->Dimethyl sulfide-->NITROGEN DIOXIDE