Poly(3-hexylthiophene-2,5-diyl)

$ 100.00 /1KG

Min. Order1KG
Purity99
Cas No104934-50-1
Supply Abilitycustomise
Update time2019-07-06

career henan chemical co

7YR

China

Chemical Properties

Product Name	Poly(3-hexylthiophene-2,5-diyl)
CAS No	104934-50-1
EC-No
Min. Order	1KG
Purity	99
Supply Ability	customise
Release date	2019/07/06

Product Number： WM0111

Product Information：

Product Name:	Poly(3-hexylthiophene-2,5-diyl)
Synonyms:	POLY(3-HEXYLTHIOPHENE-2,5-DIYL), REGIOR;POLY(3-HEXYLTHIOPHENE-2,5-DIYL), R;Thiophene Polymer;Poly(3-hexylthienylene) Poly(hexyl-2,5-thiophenediyl) Poly(3-hexylthiophene-2,5-diyl);Poly(3-n-hexylthiophene);Poly(hexylthiophene);Poly(3-hexylthiophene-2,5-diyl) (regioregular electronic grade);Poly(3-hexylthiophene-2,5-diyl), average M.W. 30,000
CAS:	104934-50-1
MF:	C10H14R2S
MW:	166.28316
EINECS:
Product Categories:	OTFT/OFET/OPV Materials;OLED;electronic;pharmacetical
Mol File:	104934-50-1.mol

Poly(3-hexylthiophene-2,5-diyl) Chemical Properties

Melting point	238 °C
solubility	chloroform, methylene chloride, toluene and THF: soluble
form	Powder/Chunks
color	red
Sensitive	Light Sensitive
CAS DataBase Reference	104934-50-1(CAS DataBase Reference)

Safety Information

Hazard Codes	Xi
Risk Statements	36/37/38
Safety Statements	26-36
WGK Germany	3

MSDS Information

Poly(3-hexylthiophene-2,5-diyl) Usage And Synthesis

Datasheet

Regioregular poly(3-hexylthiophene-2,5-diyl). Commonly known as P3HT.
The highest regioregularity P3HT (M104, RR = 96.3%) produces highly crystalline films and is recommended for OFETs, nanofibril formation and fast drying OPVs at the thin interference peak (90 nm). However, the exceptionally high regioregularity of this P3HT means that gelling and surface roughness can be an issue for slow-drying thick-film OPVs (>200 nm). Lower molecular weight and regioregularity P3HT is recommended for inkjet and other large area or slow drying deposition techniques where gelling/aggregation and surface roughness need to be avoided.
A fabrication report with mobility measurements of 0.12 cm2/Vs for M104 can be found below.
All the P3HT below is highly soluble (50 mg/ml) in chlorinated solvents such as chloroform, chlorobenzene, dichlorobenzene and trichlorobenzene. The intermediate and lower molecular weight P3HT materials are recommended for use with non-chlorinated solvents such as xylene, toluene and THF due to their increased solubility.

Chemical Properties

Green to brown to black solid

Company Profile Introduction

Recommended supplier

Send Inquriy

Poly(3-hexylthiophene-2,5-diyl)

Company Profile Introduction

You may like

Recommended supplier