(4-((2-(PIPERIDIN-1-YL)ETHYL)CARBAMOYL)PHENYL)BORONIC ACID HYDROCHLORIDE
Modify Date: 2024-02-01 08:09:50
 (4-((2-(PIPERIDIN-1-YL)ETHYL)CARBAMOYL)PHENYL)BORONIC ACID HYDROCHLORIDE structure | Common Name | (4-((2-(PIPERIDIN-1-YL)ETHYL)CARBAMOYL)PHENYL)BORONIC ACID HYDROCHLORIDE |
|---|
| CAS Number | 957060-72-9 | Molecular Weight | 312.60000 |
|---|
| Density | N/A | Boiling Point | N/A |
|---|
| Molecular Formula | C14H22BClN2O3 | Melting Point | N/A |
|---|
| MSDS | N/A | Flash Point | N/A |
|---|
|
|
|
|
|
|
|
|
Names
| Name | [4-(2-piperidin-1-ylethylcarbamoyl)phenyl]boronic acid,hydrochloride |
|---|
| Synonym | More Synonyms |
|---|
Chemical & Physical Properties
| Molecular Formula | C14H22BClN2O3 |
|---|
| Molecular Weight | 312.60000 |
|---|
| Exact Mass | 312.14100 |
|---|
| PSA | 72.80000 |
|---|
| LogP | 0.71290 |
|---|
MSDS
Material Safety Data Sheet
Section1. Identification of the substance4-(2-(Piperidin-1-yl)ethylcarbamoyl)phenylboronic acid, HClProduct Name: Synonyms:
Section2. Hazards identificationHarmful by inhalation, in contact with skin, and if swallowed.
H315:Causes skin irritation
H319:Causes serious eye irritation
H335:May cause respiratory irritation
P261:Avoid breathing dust/fume/gas/mist/vapours/spray
Wear protective gloves/protective clothing/eye protection/face protection
P280:
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
and easy to do – continue rinsing
P304+P340:IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
P405:Store locked up
Section3. Composition/information on ingredients.
4-(2-(Piperidin-1-yl)ethylcarbamoyl)phenylboronic acid, HCl
Ingredient name:
CAS number:957060-72-9
Section4. First aid measures
Immediately wash skin with copious amounts of water for at least 15 minutes while removing
Skin contact:
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.
Ingestion:
Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.
Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.
Section7. Handling and storage
Handling:This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Storage:Store in closed vessels.
Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.
Section9. Physical and chemical properties
Not specified
Appearance:
Boiling point:No data
Melting point:No data
Flash point:No data
Density:No data
Molecular formula:C14H22BClN2O3
Molecular weight:312.6
Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen chloride.
Section11. Toxicological information
No data.
Section12. Ecological information
No data.
Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.
Section14. Transportation information
Non-harzardous for air and ground transportation.
Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.
SECTION 16 - ADDITIONAL INFORMATION |
Company Profile
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions.
Our Company
Our Advantage
Quality control
Based on industry norms, customer requirements, and internal quality objectives, we establish clear quality standards. By monitoring the production process in real-time, we ensure that every step conforms to the predetermined quality standards.
Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.
Technological innovation
Our technological innovation is reflected in the development of new materials that are at the leading edge of the industry. These materials not only possess higher performance and lower costs but also enable sustainable use within an environmentally friendly production process.
Competitiveness
Based on rich experience in material development and production, we have established a more scientific cost control system. By ensuring product quality, and through refined management and continuous process optimization, we offer more competitive prices.
Word of mouth
Adhering to the principle of customer first, customer first, and honest service, we have established long-term business relationships with customers and are deeply welcomed and trusted by them.
Rich experience
Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.
Safe and fast delivery
We will arrange shipment of spot products as soon as we receive payment.
Customized products are determined based on the synthesis time of different products.
Excellent pre-sales and after-sales service
Pre sales:
We are committed to providing the most favorable quotes and detailed information about our products and company.
After-sale service:
We assist buyers in customs clearance by providing necessary documents and information.
If there is any dispute over product quality, we are committed to providing the best solution.
Our packaging and shipping
• Packaging:
1kg/bag or bottle, 25kg/drum, 50kg/drum, 200L/drum, 1T/bag or IBC drum, standard export packaging or packaging required by customers.
• Shipping
• Delivery:
Within 7 days after receiving your payment
Contact information
For more details, pls contact us freely.
Name: Elin
Email: jiuyitime@fdachem.com
Sincerely hope to establish friendly business relationships with new and old customers, and jointly create a beautiful future for the fine chemical industry!
China
