1. Materials information
Names
| Name | 1-(3-methoxyphenyl)propan-1-one | 
|---|
| Synonym | More Synonyms | 
|---|
 Chemical & Physical Properties
| Density | 1.016±0.06 g/cm3 | 
|---|
| Boiling Point | 259 ºC | 
|---|
| Molecular Formula | C10H12O2 | 
|---|
| Molecular Weight | 164.201 | 
|---|
| Flash Point | 98.9±13.4 °C | 
|---|
| Exact Mass | 164.083725 | 
|---|
| PSA | 26.30000 | 
|---|
| LogP | 2.37 | 
|---|
| Vapour Pressure | 0.0±0.5 mmHg at 25°C | 
|---|
| Index of Refraction | 1.501 | 
|---|
| Storage condition | 2~8℃ | 
|---|
| Water Solubility | Very slightly soluble (0.71 g/L) (25 ºC) | 
|---|
 MSDS
| Material Safety Data SheetSection1. Identification of the substance
 Product Name: 3’-Methoxypropiophenone Synonyms: Section2. Hazards identification
 Harmful by inhalation, in contact with skin, and if swallowed. Section3. Composition/information on ingredients.
 Ingredient name:3’-Methoxypropiophenone
 CAS number:37951-49-8
 
 Section4. First aid measures
 Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
 contaminated clothing and shoes. If irritation persists, seek medical attention.
 Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
 flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
 attention.
 Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
 Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.
 
 Section5. Fire fighting measures
 In the event of a fire involving this material, alone or in combination with other materials, use dry
 powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
 should be worn.
 
 Section6. Accidental release measures
 Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
 standards.
 Respiratory precaution:Wear approved mask/respirator
 Hand precaution:Wear suitable gloves/gauntlets
 Skin protection:Wear suitable protective clothing
 Eye protection:Wear suitable eye protection
 Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
 for disposal. See section 12.
 Environmental precautions: Do not allow material to enter drains or water courses.
 
 Section7. Handling and storage
 Handling:This product should be handled only by, or under the close supervision of, those properly qualified
 in the handling and use of potentially hazardous chemicals, who should take into account the fire,
 health and chemical hazard data given on this sheet.
 Store in closed vessels.
 Storage:
 
 Section8. Exposure Controls / Personal protection
 Engineering Controls: Use only in a chemical fume hood.
 Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
 General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.
 
 Section9. Physical and chemical properties
 Appearance:Not specified
 Boiling point:No data
 No data
 Melting point:
 Flash point:No data
 Density:No data
 Molecular formula:C10H12O2
 Molecular weight:164.2
 
 Section10. Stability and reactivity
 Conditions to avoid: Heat, flames and sparks.
 Materials to avoid: Oxidizing agents.
 Possible hazardous combustion products: Carbon monoxide.
 
 Section11. Toxicological information
 No data.
 
 Section12. Ecological information
 No data.
 
 Section13. Disposal consideration
 Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
 disposal authority, in accordance with national and regional regulations.
 
 Section14. Transportation information
 Non-harzardous for air and ground transportation.
 
 Section15. Regulatory information
 No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
 Title III, Section 313.
 
 
 SECTION 16 - ADDITIONAL INFORMATION
 N/A
 
 | 
 Safety Information
| Hazard Codes | Xi | 
|---|
| HS Code | 2914509090 | 
|---|
2. Packaging of materials
- For powders: normal is 25kgs/Drum or bag, or larger/smaller package as request. 
- For liquids: normal 25kgs/drum, 180-300kgs/bucket, or IBC, determined by the nature of the product.  
                             Or smaller package 1kg/bottle, 10kgs/bottle as request. 


3. Shipping & Delivery
Provide door to door service
Suitable for goods under 50kg
Delivery: 3-7 days
Cost: low cost

Provide airport to airport service
Suitable for goods over 50kg
Delivery: 3-14 days
Cost: high cost

Provide seaport to seaport service
Suitable for goods over 100kg
Delivery: 2-45 days
Cost: low cost

4. Contact information
For more details, pls contact us freely.
Email address: mia@fdachem.com
Mob: 86 18336764634
WhatsApp/Skype/Wechat/LINE: 86 18336764634