PRODUCT INFORMATION
Names
| Name | Di-tert-butyl(2′,4′,6′-triisopropyl-3-methoxy-6-methyl-[1,1′-biphenyl]-2-yl)phosphine |
|---|
| Synonym | More Synonyms |
|---|
Chemical & Physical Properties
| Boiling Point | 526.6±50.0 °C(Predicted) |
|---|
| Melting Point | 129-130 °C |
|---|
| Molecular Formula | C31H49OP |
|---|
| Molecular Weight | 468.69400 |
|---|
| Exact Mass | 468.35200 |
|---|
| PSA | 22.82000 |
|---|
| LogP | 9.74500 |
|---|
MSDS
Section 1: Product IdentificationChemical Name:2-(Di-t-butylphosphino)-3-methoxy-6-methyl-2'-4'-6'-tri-i-propyl-1,1'-biphenyl, min. 98% RockPhos CAS Registry Number:1262046-34-3 Formula:C31H49OP EINECS Number:none Chemical Family:organophosphine ligand Synonym:RockPhos
Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title compound1262046-34-3100%no datano data
Section 3: Hazards Identification
Emergency Overview:Irritating to skin, eyes and respiratory tract. May be harmful if swallowed.
Primary Routes of Exposure:Ingestion, inhalation
Eye Contact:Causes slight to mild irritation of the eyes.
Skin Contact:Causes slight to mild irritation of the skin.
Inhalation:Irritating to the nose, mucous membranes and respiratory tract.
Ingestion:No information available on the physiological effects of ingestion. May be harmful if swallowed.
Acute Health Affects:Irritating to skin, eyes and respiratory tract.
Chronic Health Affects:No information on long-term chronic effects.
NTP:No
IARC:No
OSHA:No
SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.
SECTION 5: Fire Fighting Measures
Flash Point:not applicable
Autoignition Temperature:none
Explosion Limits:none
Extinguishing Medium:carbon dioxide, dry powder or foam
If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
Special Fire Fighting Procedures:
self-contained breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit irritating fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.
SECTION 6: Accidental Release Measures
Small spills can be mixed with vermiculite, sodium carbonate or other suitable non-combustible adsorbent and
Spill and Leak Procedures:
swept up.
SECTION 7: Handling and Storage
Handling and Storage:Store in a tightly sealed container. Keep in a cool, dry, well-ventillated area.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:Handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Handle the material in an efficient fume hood.
Additional Protection:No additional protection required.
SECTION 9: Physical and Chemical Properties
Color and Form:white xtl.
Molecular Weight:468.69
Melting Point:129-130°
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:no data
Odor:none
Solubility in Water:insoluble
SECTION 10: Stability and Reactivity
Stability:air and moisture stable
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:none
Incompatibility:strong oxidizing agents
Decomposition Products:carbon monoxide, carbon dioxide, phorsphorous oxides and organic fumes
SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:no data
Mutagenic Effects:no data
Tetratogenic Effects:no data
SECTION 12: Ecological Information
Ecological Information:No information available
SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA
SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory
SARA (Title 313):Not reportable under SARA 313
Second Ingredient:none
SECTION 16 - ADDITIONAL INFORMATION
N/A
|
Safety Information
| Hazard Codes | Xi |
|---|
| RIDADR | NONH for all modes of transport |
|---|
| WGK Germany | 3.0 |
|---|
Synonyms
| 2-(Di-t-butylphosphino)-3-methoxy-6-methyl-2',4',6'-tri-i-propyl-1,1'-biphenyl |
| di-tert-butyl(2',4′,6′-triisopropyl-3-methoxy-6-methyl-[1,1′-biphenyl]-2-yl)phosphine |
| Di-tert-butyl(2',4',6'-triisopropyl-3-methoxy-6-methyl-[1,1'-biphenyl]-2-yl)phosphine |
| 2-Di(tert-butyl)phosphino-2',4',6'-triisopropyl-3-methoxy-6-methylbiphenyl |
| 2-(DI-T-BUTYLPHOSPHINO)-3-METHOXY-6-METHYL-2'-4'-6'-TRI-I-PROPYL-1,1'-BIPHENYL |
| 2-(3-METHOXYPHENYL)PROPAN-2-AMINE |
Company Profile
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions.
Our Company
Our Advantage
Rich experience
Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.
Excellent quality, purity, and competitive price
Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.
Safe and fast delivery
We will arrange shipment of spot products as soon as we receive payment.
Customized products are determined based on the synthesis time of different products.
Excellent pre-sales and after-sales service
Pre sales:
We are committed to providing the most favorable quotes and detailed information about our products and company.
after-sale service:
We assist buyers in customs clearance by providing necessary documents and information.
If there is any dispute over product quality, we are committed to providing the best solution.
• Packaging:
1kg/bag, 25kg/drum, 50kg/drum, 180kg/drum, 200kg/drum, 1T/bag/drum, standard export packaging or packaging required by customers
• Shipping
• Delivery:
Within 7 days after receiving your payment
Contact information
For more details, pls contact us freely.
Contact name: Tina
Email address: Tina@fdachem.com
Mob: 86 13213167925
WhatsApp/Skype/Wechat/LINE: 86 15225627621
China
