1/1
2-(CHLOROMETHYL)-1,3,5-TRIISOPROPYLBENZENE NEW
- Min. Order1kg
- Purity99%
- Cas No38580-86-8
- Supply Ability100kg
- Update time2025-10-13
| Product Name | 2-(CHLOROMETHYL)-1,3,5-TRIISOPROPYLBENZENE |
| CAS No | 38580-86-8 |
| EC-No | |
| Min. Order | 1kg |
| Purity | 99% |
| Supply Ability | 100kg |
| Release date | 2025/10/13 |
PRODUCT INFORMA
| Common Name | 2-(CHLOROMETHYL)-1,3,5-TRIISOPROPYLBENZENE | ||
|---|---|---|---|
| CAS Number | 38580-86-8 | Molecular Weight | 252.82300 |
| Density | 0.945g/cm3 | Boiling Point | 289.4ºC at 760 mmHg |
| Molecular Formula | C16H25Cl | Melting Point | 36ºC |
| MSDS | N/A | Flash Point | 125ºC |
| Purity | Quantity | Budget | Inquiry |
|---|
Properties
Spectrum
Names
| Name | 2,4,6-Triisopropylbenzyl Chloride |
|---|---|
| Synonym | More Synonyms |
Chemical & Physical Properties
| Density | 0.945g/cm3 |
|---|---|
| Boiling Point | 289.4ºC at 760 mmHg |
| Melting Point | 36ºC |
| Molecular Formula | C16H25Cl |
| Molecular Weight | 252.82300 |
| Flash Point | 125ºC |
| Exact Mass | 252.16400 |
| LogP | 5.79560 |
| Index of Refraction | 1.499 |
| Storage condition | 2-8°C |
MSDS
2,4,6-Triisopropylbenzyl Chloride Revision number: 5 SAFETY DATA SHEET Section1. IDENTIFICATION Product name:2,4,6-Triisopropylbenzyl Chloride Revision number:5 Section2. HAZARDS IDENTIFICATION GHS classification PHYSICAL HAZARDS Category 1 Corrosive to metals HEALTH HAZARDS Category 1C Skin corrosion/irritation Serious eye damage/eye irritationCategory 1 Not classified ENVIRONMENTAL HAZARDS GHS label elements, including precautionary statements Pictograms or hazard symbols Signal wordDanger Hazard statementsMay be corrosive to metals Causes severe skin burns and eye damage Precautionary statements: [Prevention]Keep only in original container. Do not breathe dust/fume/gas/mist/vapours/spray. Wash hands thoroughly after handling. Wear protective gloves/eye protection/face protection. [Response]IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. Immediately call a POISON CENTER or doctor/physician. Absorb spillage to prevent material damage. [Storage]Store locked up. [Disposal]Dispose of contents/container through a waste management company authorized by the local government. 2,4,6-Triisopropylbenzyl Chloride Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/mixture:Substance Components:2,4,6-Triisopropylbenzyl Chloride Percent:>98.0%(GC) CAS Number:38580-86-8 Synonyms:2-Chloromethyl-1,3,5-triisopropylbenzene Chemical Formula:C16H25Cl Section4. FIRST AID MEASURES Remove victim to fresh air and keep at rest in a position comfortable for breathing. Inhalation: Immediately call a POISON CENTER or doctor/physician. Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of soap and water. Immediately call a POISON CENTER or doctor/physician. Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Immediately call a POISON CENTER or doctor/physician. Ingestion:Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT induce vomiting. A rescuer should wear personal protective equipment, such as rubber gloves and air- Protection of first-aiders: tight goggles. Section5. FIRE-FIGHTING MEASURES Suitable extinguishingDry chemical, foam, water spray, carbon dioxide. media: Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to from the chemical:generate poisonous fume. Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in the surroundings: Remove movable containers if safe to do so. Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment. equipment for firefighters: Section6. ACCIDENTAL RELEASE MEASURES Personal precautions,Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should emergency procedures: be controlled around the leakage area by roping off, etc. Environmental precautions: Prevent product from entering drains. Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it. containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with up: appropriate laws and regulations. Section7. HANDLING AND STORAGE Precautions for safe handling Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent dispersion of dust. Wash hands and face thoroughly after handling. Use a closed system if possible. Use a local exhaust if dust or aerosol will be generated. Advice on safe handling:Avoid contact with skin, eyes and clothing. May develop pressure. Open carefully. Use corrosive resistant equipment. Conditions for safe storage, including any incompatibilities Storage conditions:Keep container tightly closed. Store in a refrigerator. Store locked up. Store away from incompatible materials such as oxidizing agents. Comply with laws. Keep only in original container. Packaging material: 2,4,6-Triisopropylbenzyl Chloride Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls:Install a closed system or local exhaust. Also install safety shower and eye bath. Personal protective equipment Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator, etc. Use respirators approved under appropriate government standards and follow local and national regulations. Hand protection:Impervious gloves. Safety goggles. A face-shield, if the situation requires. Eye protection: Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires. Section9. PHYSICAL AND CHEMICAL PROPERTIES Physical state (20°C):Solid Crystal- Powder Form: Colour:White - Very pale yellow No data available Odour: pH: No data available Melting point/freezing point:36°C Boiling point/range:No data available Flash point:No data available Flammability or explosive limits: Lower:No data available Upper:No data available Relative density:No data available Solubility(ies): [Water]No data available [Other solvents]No data available Section10. STABILITY AND REACTIVITY Chemical stability:Stable under proper conditions. Possibility of hazardous No special reactivity has been reported. reactions: Incompatible materials: Oxidizing agents Hazardous decomposition Carbon monoxide, Carbon dioxide, Hydrogen chloride products: Section11. TOXICOLOGICAL INFORMATION Acute Toxicity:No data available Skin corrosion/irritation: No data available Serious eyeNo data available damage/irritation: Germ cell mutagenicity: No data available Carcinogenicity: No data available IARC = NTP =No data available Reproductive toxicity:No data available Section12. ECOLOGICAL INFORMATION Ecotoxicity: Fish:No data available Crustacea:No data available Algae:No data available Persistence / degradability: No data available BioaccumulativeNo data available potential(BCF): Mobility in soil 2,4,6-Triisopropylbenzyl Chloride Section12. ECOLOGICAL INFORMATION Log Pow:No data available Soil adsorption (Koc): No data available Henry's LawNo data available constant(PaM3/mol): Section13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. Section14. TRANSPORT INFORMATION Hazards Class:8: Corrosive. UN-No:3261 Proper shipping name:Corrosive solid, acidic, organic, n.o.s. Packing group:III Section15. REGULATORY INFORMATION Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002 and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were prescribed. SECTION 16 - ADDITIONAL INFORMATION N/A |
Safety Information
| Risk Phrases | R34 |
|---|---|
| Safety Phrases | S36/S37/S39 |
| RIDADR | UN 3261 |
| HS Code | 2903999090 |
Synthetic Route
Previous 1/2 Next![]() 1,3,5-Triisopro... CAS#:717-74-8 ![]() Chloromethyl me... CAS#:107-30-2 ~% ![]() 2-(CHLOROMETHYL... CAS#:38580-86-8 |
| Literature: Nilsson,A.; Olsson,K. Acta Chemica Scandinavica, Series B: Organic Chemistry and Biochemistry, 1975 , vol. 29, p. 752 - 756 |
![]() 1,3,5-Triisopro... CAS#:717-74-8 ~% ![]() 2-(CHLOROMETHYL... CAS#:38580-86-8 |
| Literature: Wagner, Peter J.; Meador, Michael A.; Zhou, Boli; Park, Bong-Ser Journal of the American Chemical Society, 1991 , vol. 113, # 25 p. 9630 - 9639 |
![]() 2,4,6-TRIISOPRO... CAS#:49623-71-4 ~% ![]() 2-(CHLOROMETHYL... CAS#:38580-86-8 |
| Literature: Wagner, Peter J.; Meador, Michael A.; Zhou, Boli; Park, Bong-Ser Journal of the American Chemical Society, 1991 , vol. 113, # 25 p. 9630 - 9639 |
Precursor & DownStream
| Precursor 7 | Previous 1/2 Next |
|---|---|
| |
| DownStream 2 | |
| |
Customs
| HS Code | 2903999090 |
|---|---|
| Summary | 2903999090 halogenated derivatives of aromatic hydrocarbons VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:5.5% General tariff:30.0% |
Synonyms
| 2-(chloromethyl)-1,3,5-tri(propan-2-yl)benzene |
| 2-Chloromethyl-1,3,5-triisopropylbenzene |
Company Profile
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions.
Our Company


Our Advantage
Rich experience
Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.
Excellent quality, purity, and competitive price
Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.

Safe and fast delivery
We will arrange shipment of spot products as soon as we receive payment.
Customized products are determined based on the synthesis time of different products.
Excellent pre-sales and after-sales service
Pre sales:
We are committed to providing the most favorable quotes and detailed information about our products and company.
after-sale service:
We assist buyers in customs clearance by providing necessary documents and information.
If there is any dispute over product quality, we are committed to providing the best solution.
? Packaging:
1kg/bag, 25kg/drum, 50kg/drum, 180kg/drum, 200kg/drum, 1T/bag/drum, standard export packaging or packaging required by customers


? Shipping

? Delivery:
Within 7 days after receiving your payment
Contact information
For more details, pls contact us freely.
Contact name: Tina
Email address: Tina@fdachem.com
Mob: 86 13213167925
WhatsApp/Skype/Wechat/LINE: 86 15225627621
Company Profile Introduction
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions. With our agile custom synthesis capabilities and responsive supply chain system, our products have gained widespread adoption across Asian markets including Japan, South Korea, Singapore, and Malaysia, while also expanding deeply into Europe and the Americas. We have forged long-term strategic partnerships with numerous leading global enterprises in the sector. "Driving value through technology and earning trust through service" is our core mission. Looking ahead, we will continue to focus on technological breakthroughs and green innovation in new materials, collaborating with partners to build a high-quality industrial ecosystem and provide globally competitive solutions with greater foresight.
China



CAS#:4276-88-4
CAS#:4276-85-1
CAS#:6319-85-3

