1/2
(1R,2R,3S,5R)-(-)-2,3-Pinanediol NEW
- Min. Order0.1KG
- Purity99%
- Cas No22422-34-0
- Supply Abilityg-kg-tons, free sample is available
- Update time2025-06-21
China
| Product Name | (1R,2R,3S,5R)-(-)-2,3-Pinanediol |
| CAS No | 22422-34-0 |
| EC-No | |
| Min. Order | 0.1KG |
| Purity | 99% |
| Supply Ability | g-kg-tons, free sample is available |
| Release date | 2025/06/21 |
(1R,2R,3S,5R)-(-)-2,3-Pinanediol
 (1R,2R,3S,5R)-(-)-2,3-Pinanediol structure | Common Name | (1R,2R,3S,5R)-(-)-2,3-Pinanediol | ||
|---|---|---|---|---|
| CAS Number | 22422-34-0 | Molecular Weight | 170.249 | |
| Density | 1.1±0.1 g/cm3 | Boiling Point | 263.7±8.0 °C at 760 mmHg | |
| Molecular Formula | C10H18O2 | Melting Point | 55-59ºC | |
| MSDS | ChineseUSA | Flash Point | 120.8±13.0 °C | |
| Purity | Quantity | Budget | Inquiry |
|---|
Properties
Articles2
Spectrum
Names
| Name | (1R,3S,4R,5R)-4,6,6-trimethylbicyclo[3.1.1]heptane-3,4-diol |
|---|---|
| Synonym | More Synonyms |
Chemical & Physical Properties
| Density | 1.1±0.1 g/cm3 |
|---|---|
| Boiling Point | 263.7±8.0 °C at 760 mmHg |
| Melting Point | 55-59ºC |
| Molecular Formula | C10H18O2 |
| Molecular Weight | 170.249 |
| Flash Point | 120.8±13.0 °C |
| Exact Mass | 170.130676 |
| PSA | 40.46000 |
| LogP | 1.58 |
| Vapour Pressure | 0.0±1.2 mmHg at 25°C |
| Index of Refraction | 1.520 |
MSDS
Name:(1R 2R 3S 5R)-(-)-2 3-Pinanediol 98% Material Safety Data SheetSynonym:CAS:22422-34-0Section 1 - Chemical Product MSDS Name:(1R 2R 3S 5R)-(-)-2 3-Pinanediol 98% Material Safety Data Sheet Synonym: Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS CAS#Chemical NamecontentEINECS#22422-34-0(1R,2R,3S,5R)-(-)-2,3-Pinanediol98%unlistedHazard Symbols: None Listed. Risk Phrases: None Listed. Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW The toxicological properties of this material have not been fully investigated. Potential Health Effects Eye: May cause eye irritation. Skin: May cause skin irritation. Ingestion: May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. Inhalation: May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Chronic: No information found. Section 4 - FIRST AID MEASURES Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Ingestion: Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Notes to Physician: Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Runoff from fire control or dilution water may cause pollution. Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam. Use agent most appropriate to extinguish fire. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Section 7 - HANDLING and STORAGE Handling: Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Storage: Store in a cool, dry, well-ventilated area away from incompatible substances. Keep refrigerated. (Store below 4C/39F.) Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 22422-34-0: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Solid Color: white Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: 101 - 102 deg C @ 1mmHg Freezing/Melting Point: 57 - 59 deg C Autoignition Temperature: Not applicable. Flash Point: > 110 deg C (> 230.00 deg F) Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: C10H18O2 Molecular Weight: 170.25 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Stable at room temperature in closed containers under normal storage and handling conditions. Conditions to Avoid: Incompatible materials, dust generation, excess heat, strong oxidants. Incompatibilities with Other Materials: Oxidizing agents. Hazardous Decomposition Products: Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide. Hazardous Polymerization: Has not been reported. Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 22422-34-0 unlisted. LD50/LC50: Not available. Carcinogenicity: (1R,2R,3S,5R)-(-)-2,3-Pinanediol - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Not regulated as a hazardous material. IMO Not regulated as a hazardous material. RID/ADR Not regulated as a hazardous material. Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: Not available. Risk Phrases: Safety Phrases: S 24/25 Avoid contact with skin and eyes. S 28A After contact with skin, wash immediately with plenty of water. S 37 Wear suitable gloves. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 22422-34-0: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 22422-34-0 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 22422-34-0 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
Safety Information
| Personal Protective Equipment | Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter |
|---|---|
| Hazard Codes | Xi |
| Risk Phrases | R36/37/38 |
| Safety Phrases | S24/25 |
| RIDADR | NONH for all modes of transport |
| HS Code | 2942000000 |
Synthetic Route
Previous 1/2 Next (1S)-(-)-Alpha-... CAS#:7785-26-4 ~66% (1R,2R,3S,5R)-(... CAS#:22422-34-0 |
| Literature: Hobuss, Dennis; Thoene, Carsten; Laschat, Sabine; Baro, Angelika Synthesis, 2003 , # 13 p. 2053 - 2056 |
 Alpha-pinene CAS#:80-56-8 ~91% (1R,2R,3S,5R)-(... CAS#:22422-34-0 |
| Literature: Zhu, Yongqiang; Zhao, Xin; Zhu, Xinrong; Wu, Gang; Li, Yuejie; Ma, Yuheng; Yuan, Yunxia; Yang, Jie; Hu, Yang; Ai, Li; Gao, Qingzhi Journal of Medicinal Chemistry, 2009 , vol. 52, # 14 p. 4192 - 4199 |
![(1R,2S,5R)-6,6-dimethylspiro[bicycle[3.1.1]heptane-2,2’-oxiran]-3-one structure](https://image.chemsrc.com/caspic/307/22466-70-2.png) (1R,2S,5R)-6,6-... CAS#:22466-70-2 ~% (1R,2R,3S,5R)-(... CAS#:22422-34-0  trans-2,3-pinanediol CAS#:22466-72-4 |
| Literature: Bulletin of the Chemical Society of Japan, , vol. 41, # 11 p. 2700 - 2703 |
Precursor & DownStream
| Precursor 4 | |
|---|---|
| |
| DownStream 1 | |
| |
CAS#:1845-25-6
CAS#:60-29-7
CAS#:77091-61-3Customs
| HS Code | 2906199090 |
|---|---|
| Summary | 2906199090. cyclanic, cyclenic or cyclotherpenic alcohols. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:5.5%. General tariff:30.0% |
Company Profile
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions.
Our Company
Our Advantage
Quality control
Based on industry norms, customer requirements, and internal quality objectives, we establish clear quality standards. By monitoring the production process in real-time, we ensure that every step conforms to the predetermined quality standards.
Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.
Technological innovation
Our technological innovation is reflected in the development of new materials that are at the leading edge of the industry. These materials not only possess higher performance and lower costs but also enable sustainable use within an environmentally friendly production process.
Competitiveness
Based on rich experience in material development and production, we have established a more scientific cost control system. By ensuring product quality, and through refined management and continuous process optimization, we offer more competitive prices.
Word of mouth
Adhering to the principle of customer first, customer first, and honest service, we have established long-term business relationships with customers and are deeply welcomed and trusted by them.
Rich experience
Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.
Safe and fast delivery
We will arrange shipment of spot products as soon as we receive payment.
Customized products are determined based on the synthesis time of different products.
Excellent pre-sales and after-sales service
Pre sales:
We are committed to providing the most favorable quotes and detailed information about our products and company.
After-sale service:
We assist buyers in customs clearance by providing necessary documents and information.
If there is any dispute over product quality, we are committed to providing the best solution.
Our packaging and shipping
• Packaging:
1kg/bag or bottle, 25kg/drum, 50kg/drum, 200L/drum, 1T/bag or IBC drum, standard export packaging or packaging required by customers.
• Shipping
• Delivery:
Within 7 days after receiving your payment
Contact information
For more details, pls contact us freely.
Name: Elin
Email: jiuyitime@fdachem.com
Sincerely hope to establish friendly business relationships with new and old customers, and jointly create a beautiful future for the fine chemical industry!
Company Profile Introduction
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions. With our agile custom synthesis capabilities and responsive supply chain system, our products have gained widespread adoption across Asian markets including Japan, South Korea, Singapore, and Malaysia, while also expanding deeply into Europe and the Americas. We have forged long-term strategic partnerships with numerous leading global enterprises in the sector. "Driving value through technology and earning trust through service" is our core mission. Looking ahead, we will continue to focus on technological breakthroughs and green innovation in new materials, collaborating with partners to build a high-quality industrial ecosystem and provide globally competitive solutions with greater foresight.
You may like
