| CAS: | 111-88-6 |
| MF: | C8H18S |
| MW: | 146.29 |
| EINECS: | 203-918-1 |
| Product Categories: | Industrial/Fine Chemicals;K00001 |
| Mol File: | 111-88-6.mol |
 |
|
| 1-Mercaptooctane Chemical Properties |
| Melting point | -49 °C |
| Boiling point | 197-200 °C (lit.) |
| density | 0.843 g/mL at 25 °C (lit.) |
| vapor pressure | 0.3 hPa (20 °C) |
| refractive index | n20/D 1.452(lit.) |
| Fp | 55 °F |
| storage temp. | Store below +30°C. |
| solubility | 0.004g/l |
| form | Liquid |
| pka | 10.55±0.10(Predicted) |
| Specific Gravity | 0.843 (20/4℃) |
| color | Clear colorless |
| Odor | at 0.10?%?in?dipropylene glycol. sulfurous |
| Odor Threshold | 0.0016ppm |
| Water Solubility | Not miscible in water. |
| BRN | 1733101 |
| Exposure limits | NIOSH: Ceiling 0.5 ppm(3.0 mg/m3) |
| Stability: | Stable. Incompatible with strong acids, strong oxidizing agents, alkali metals. |
| LogP | 4.21 at 20℃ |
| CAS DataBase Reference | 111-88-6(CAS DataBase Reference) |
| NIST Chemistry Reference | 1-Octanethiol(111-88-6) |
| EPA Substance Registry System | 1-Octanethiol (111-88-6) |
| 1-Mercaptooctane Usage And Synthesis |
| Chemical Properties | colourless liquid |
| Uses | 1-Octanethiol can be used to improve charge injection by creating a monolayer of this material on gold source-drain electrode surfaces for bottom-contact thin-film transistors (TFTs). |
| Uses | OT can be used as a sulfur precursor for the preparation of shell for CdSe/CdS quantum dots. It forms ligands that help in enhancing the power efficiency of hetero-junction nanorod sensitized solar cells as it enhances the electron extraction from the nanorod and TiO2 interface. OT based stabilized coating on copper nanoparticles (CuNPs) may be used in the dispersion of these colloidal particles in different sample solutions. It can be used to improve charge injection by creating a monolayer on gold source-drain electrode surfaces for bottom-contact thin-film transistors (TFTs). |
| Definition | ChEBI: Octane-1-thiol is an alkanethiol that is octane substituted by a thiol group at position 1. |
| Synthesis Reference(s) | The Journal of Organic Chemistry, 37, p. 1532, 1972 DOI: 10.1021/jo00975a015
Synthetic Communications, 25, p. 2655, 1995 DOI: 10.1080/00397919508011812
Tetrahedron Letters, 31, p. 1397, 1990 DOI: 10.1016/S0040-4039(00)88815-2 |
| General Description | A clear colorless liquid. Flash point 115°F. Insoluble in water and less dense than water. Used to make other chemicals. |
| Air & Water Reactions | Flammable. Insoluble in water. |
| Reactivity Profile | 1-Mercaptooctane is incompatible with the following: Oxidizers, reducing agents, strong acids & bases, alkali metals . |
| Health Hazard | TOXIC; may be fatal if inhaled, ingested or absorbed through skin. Inhalation or contact with some of these materials will irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. |
| Fire Hazard | HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion and poison hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. |
| Purification Methods | Pass the thiol through a column of alumina and work under N2, or Ar. Distil it under N2 and a vacuum. Store it under N2, or Ar in the dark. [Battacharyya et al. J Chem Soc, Faraday Trans 1 82 135 1986, Fletcher J Am Chem Soc 68 2727 1946]. [Beilstein 1 III 1710, 1 IV 1767.] |
Product picture
Packing &shipping&Payment
Packing:25kg/drum
Shipping:by sea or by air
Payment:T/T,western union,moneygram
Packaging Details drum
Port:Tianjin
Lead Time :
| Quantity(Kilograms) | 1 - 10000 | >10000 |
| Est. Time(days) | 5 | To be negotiated |
Company information
Hebei Mojin Biotechnology Co., Ltd, Our company is a professional in 4'-Methylacetophenone,Levamisole hydrochloride ,N-Methylformamide and other chemical reagents research and development production enterprises. Our business covers more than 30 countries, most of the big customers come from Europe, America and other countries in the world, we can guarantee the quality and price. In recent decades, with the efforts of all employees, we have established many cooperative companies in shandong, henan, guangdong and other places. Our corporate purpose is based on the market, enhance the strength, take the road of scientific and environmental sustainable development, relying on the country. Technology r & d center, increase the investment in r & d, based on the domestic market, expand the international market, manufacturing quality products, sincere service to the society, into a modern, ecological, scientific and technological enterprise world.
Advantage
In stock
China
