TITANIUM OXIDE

그림문자(GHS)

• 그림문자(GHS)

  

• 신호 어

  Warning

• 유해·위험 문구

  H302：삼키면 유해함

  H315：피부에 자극을 일으킴

  H319：눈에 심한 자극을 일으킴

  H341：유전적인 결함을 일으킬 것으로 의심됨 (노출되어도 생식세포 유전독성을 일으키지 않는다는 결정적인 증거가 있는 노출경로가 있다면 노출경로 기재)

• 예방조치문구

  P201：사용 전 취급 설명서를 확보하시오.

  P202：모든 안전 조치 문구를 읽고 이해하기 전에는 취급하지 마시오.

  P264：취급 후에는 손을 철저히 씻으시오.

  P264：취급 후에는 손을 철저히 씻으시오.

  P270：이 제품을 사용할 때에는 먹거나, 마시거나 흡연하지 마시오.

  P280：보호장갑/보호의/보안경/안면보호구를 착용하시오.

  P302+P352：피부에 묻으면 다량의 물로 씻으시오.

  P305+P351+P338：눈에 묻으면 몇 분간 물로 조심해서 씻으시오. 가능하면 콘택트렌즈를 제거하시오. 계속 씻으시오.

  P308+P313：노출 또는 접촉이 우려되면 의학적인 조치· 조언를 구하시오.

  P332+P313：피부 자극이 생기면 의학적인 조치· 조언을 구하시오.

  P337+P313：눈에 대한 자극이 지속되면 의학적인 조치· 조언를 구하시오.

  P405：밀봉하여 저장하시오.

  P501：...에 내용물 / 용기를 폐기 하시오.

TITANIUM OXIDE 화학적 특성, 용도, 생산

• 화학적 성질

  Ti₃O₅: (1) Rel.molar mass (Mr ): 223.0070; (2) wt.% Ti: 64.1; (3) Color: Dark blue; (4) crystal lattice structure: dimorphic (120°C) Low T: Anasovite-type I Monoclinic, C2/m, Z = 4 a = 975.2 pm; b = 380.2 pm; c = 944.2 pm; β = 91.55° High T: Pseudobrookite (orthorhombic); (5) ρcalc. = 4900 kg.m^–3, m.p. = 1777°C

• 물리적 성질

  Dark blue crystals. Anasovite Type II is similar to that identified in titania slags. Can be stabilized at room temperature with a small amount of iron.

• 용도

  Nanocrystalline titanium oxide electrodes is useful for photo voltaic applications. It plays an important role as photocatalyst under visible light radiation. Treated titanium oxide nanotubes play a significant part in the development of nano-scale hydroxy apatite. It is too utilized as catalysts.

• 제조 방법

  Anosovite can be prepared in the following ways:
  (i) By the hydrogen reduction of solid TiO₂ at temperature around 1300°C16 according to the following reaction scheme: 3TiO₂(s) + H₂(g) —> T₃O₅(s) + H₂O(g) (1300°C).
  (ii) By mixing intimately stoichiometric quantities of titanium metal and titanium dioxide in an electric-arc furnace under an argon atmosphere according to the following reaction scheme:
  5TiO₂(s) + Ti(s) —> 2Ti₃O₅(s) (1150°C)
  followed by annealing in a vacuum of the crushed material for 2 weeks at 1150°C in a sealed silica tube. This oxide is dimorphic with a rapid phase transition from semiconductor to metal occurring at roughly 120°C. α-Ti₃O₅—> β-Ti₃O₅ (120°C).
  The low-temperature form (α-Ti₃O₅), also called anosovite type I, crystallizes with a monoclinic unit cell with the Ti-O bond distances ranging from 178 to 221 pm. The structure can be described in terms of TiO6 8– octahedra joined by sharing the edge and corners to form an infinite three-dimensional network. Anosovite I is obtained by the hydrogen reduction of pure rutile at 1300°C. The high-temperature form (β-Ti₃O₅), also called anosovite type II, is a slightly deformed pseudobrookite structure (AB₂O₅) with the Ti-O bond distances ranging from 191 to 210 pm. The type II is obtained by hydrogen reduction at 1500°C with magnesia as a catalyst. The anasovite type II is similar to that identified in titanium slags. It can be stabilized at room temperature with a small amount of iron.
  

TITANIUM OXIDE 준비 용품 및 원자재

TITANIUM OXIDE 공급 업체

Global(105)Suppliers

TITANIUM OXIDE 관련 검색