TELLURIC ACID Struktur

TELLURIC ACID

Bezeichnung:TELLURIC ACID

CAS-Nr13520-55-3

Englisch Name:TELLURIC ACID

CBNumberCB8138828

SummenformelH6O6Te

Molgewicht229.64

MOL-Datei13520-55-3.mol

TELLURIC ACID physikalisch-chemischer Eigenschaften

Löslichkeit	H₂O: 0.1 g/mL, clear, colorless
pka	7.7(at 25℃)

Sicherheit

Kennzeichnung gefährlicher	Xn
R-Sätze:	20
S-Sätze:	22-36/37/39-38
RIDADR	UN 3284 6.1/PG 3
WGK Germany	3
RTECS-Nr.	WY2350000
F	8

TELLURIC ACID Chemische Eigenschaften,Einsatz,Produktion Methoden

R-Sätze Betriebsanweisung:
R20:Gesundheitsschädlich beim Einatmen.
S-Sätze Betriebsanweisung:
S22:Staub nicht einatmen.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S38:Bei unzureichender Belüftung Atemschutzgerät anlegen.
Chemische Eigenschaften
Formula weight 229.66. Colorless crystals, stable in air. May occur in a monoclinic modification (space group C⁵₂h) and a cubic modification (space group O^3 ); the large crystals are generally monoclinic while the microcrystalline powder frequently consists of a mixture of both forms.
Heating H6TeO6 between 100 and 220°C converts it to solid, water-insoluble polymetatelluric acid; the latter decomposes above 220°C into TeO3, and at 400°C or higher into TeO2 and O2. Melts in a sealed tube at about 136°C, forming a concentrated aqueous solution of polymetatelluric acid and some polyorthotelluric acid, d (monoclinic) 3.071; d (cubic) 3.17.
Definition
ChEBI: Telluric acid is a tellurium oxoacid. It is a conjugate acid of a hydrogentellurate.
Synthese
(1) The starting materials are very fine Te powder and aqueous HClO3 solution. The acid required for the oxidation of 0.1 mole (that is, 12.75 g.) of Te is prepared by adding a lukewarm mixture of 40 ml. of H2O and 7.2 ml. of concentrated H2SO4 to a solution of 24 g. of Ba(ClO3)2·H2O in 100 ml. of H2O. After about five hours, the solution is decanted from the precipitated BaSO4 through a filter, and if desired the residue is extracted once with H2O. To oxidize the Te, it is added to a 500-ml., round-bottom flask placed under the hood. It is then moistened with 5 ml. of 50% HNO3 and about one fourth of the HClO3 solution. With thorough agitation (by swirling) the flask contents soon boil and the reaction proceeds at boiling with strong Cl2 evolution to form H6TeO6 .

(2) The process is somewhat more cumbersome than method I since it requires, among other things, separate preparation of TeO2 as well as repeated recrystallization of the acid to quantitatively re - move the simultaneously formed salts. The yield is 75-85%. For detailed description of the procedure, see the literature below.

(3) Reaction of Te or TeO2 with 30% H2O2 in sulfuric acid or alkaline solution and subsequent precipitation of H6TeO6 with concentrated nitric acid.
(4) Oxidation of Te with HNO3 and CrO3. The product must be re - crystallized several times in order to remove the Cr(NO3)3 byproduct.
Solubility in water
Readily soluble in water; very slightly soluble in concentrated nitric acid.

TELLURIC ACID Upstream-Materialien And Downstream Produkte

TELLURIC ACID Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

13520-55-3, TELLURIC ACID Verwandte Suche:

Send Inquriy