Orthotellursure

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H332：Gesundheitsschädlich bei Einatmen.

• Sicherheit

  P261：Einatmen von Staub vermeiden.

  P271：Nur im Freien oder in gut belüfteten Räumen verwenden.

TELLURIC ACID Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R20:Gesundheitsschädlich beim Einatmen.

• S-Sätze Betriebsanweisung:

  S22:Staub nicht einatmen.
  S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
  S38:Bei unzureichender Belüftung Atemschutzgerät anlegen.

• Beschreibung

  Telluric acid, H6TeO6, is obtained in the form of its salts when tellurium is fused with potassium nitrate plus carbonate, or by the oxidizing action of chlorine on a tellurite in alkaline solution. The free acid may be obtained by decomposing the barium salt with sulfuric acid and concentrating the solution.
  where tellurium is in an octahedral coordination. Telluric acid, Te(OH)6, has the CAS number of 7803-68- 1 and a molecular weight of 229.6425 g/mol. It is a white, monoclinic crystal with a density of 3.07 g/cm³. Its melting point is 136°C and its solubility in water is 50.1 g/100 ml.
  It is also formed when tellurium dioxide is oxidized by hydrogen peroxide in caustic solution (A. Gutbier, Zest. Anorg. Chem., 1904, 40, p. 260), and perhaps best of all by oxidizing tellurium with a mixture of nitric and chromic acids. It crystallizes as prisms, which lose their water of hydration at 160°C. The tellurates of the alkaline earth metals are more or less soluble in water, those of the other metals being very sparingly or almost insoluble in water. Some tellurates exist in two forms, a colorless form soluble in water and acids, and a yellow form insoluble in water and acids.

• Chemische Eigenschaften

  White, heavy crystals. Soluble in hot water and alkalies; slightly soluble in cold water.

• Physikalische Eigenschaften

  White crystals; dimorphic solid; exists in both cubic and monoclinic crystalline forms; density 3.07g/cm³; melts at 136°C; tends to polymerize (similar to stannic acid); forms polymetatelluric acid (H2TeO4)n on strong heating; soluble in water, about 33g/100 mL at 30°C; the solubility decreases as the molecule polymerizes and becomes colloidal; a very weak dibasic acid, pKa1 7.68 and pKa2 11.0 at 18°C; soluble in dilute nitric acid and alkalies.

• Verwenden

  Chemical reagent.

• Definition

  ChEBI: Orthotelluric acid is a tellurium oxoacid. It is a conjugate acid of an orthotellurate(1-).

• synthetische

  Telluric acid can be prepared by reducing barium tellurate with sulfuric acid: BaTeO₄ + H₂SO₄ + 2H₂O → H₆TeO₆ + BaSO₄ Also, telluric acid can be prepared by oxidation of tellurium or tellurium dioxide with a strong oxidizing agent such as hydrogen peroxide, sodium peroxide, chromic acid, or potassium permanganate in nitric acid. Molecular equations for overall reactions are shown below: Te + 3H2O2 → H6TeO6 TeO₂ + H₂O₂ + 2H₂O → H₆TeO₆ Te + 2CrO₃ + 3H₂O → H₆TeO₆ + Cr₂O₃
  At cold temperatures at about 1°C, telluric acid crystallizes as tetrahydrate.

• Allgemeine Beschreibung

  Telluric acids exist in both cubic and monoclinic crystalline forms.1 It may be prepared by treating tellurium and tellurous acid with strong oxidants.

• Hazard

  As for tellurium.

• Sicherheitsprofil

  Poison by ingestion and intravenous routes. When heated to decomposition it emits toxic fumes of Te. See also TELLURIUM COMPOUNDS.

• läuterung methode

  Crystallise it once from nitric acid, then repeatedly from hot water (0.4mL/g). [Fehér in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol I pp 451-453 1963.]

TELLURIC ACID Upstream-Materialien And Downstream Produkte

Orthotellursure Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(159)Suppliers

7803-68-1, TELLURIC ACID Verwandte Suche: