Alafosfalin

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H302：Gesundheitsschädlich bei Verschlucken.

• Sicherheit

  P261：Einatmen von Staub vermeiden.

  P271：Nur im Freien oder in gut belüfteten Räumen verwenden.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

(S)-ALANYL-(R)-1-AMINOETHYLPHOSPHONIC ACID Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R22:Gesundheitsschädlich beim Verschlucken.

• Originator

  Alafosfalin ,Roche Product Limited

• Verwenden

  L-Alanyl-L-1-aminoethylphosphonic acid is an antibacterial agent.

• Manufacturing Process

  14.1 g (0.168 mol) of solid sodium bicarbonate were added to a solution of 7 g (0.056 mol) of (1R,S)-1-aminoethylphosphonic acid in 280 ml of water and 140 ml of ethanol while stirring at 0°C. While stirring this mixture at 0°C, a solution of 17.9 g (0.056 mol) of the N-hydroxysuccinimide ester of N-benzyloxycarbonyl-L-alanine in 140 ml of warm ethanol was added dropwise over ca 15 minutes. The latter solution was washed in with 70 ml of ethanol. The heterogeneous mixture was stirred for 1 hour at 0°C and then for a further 16 hours at room temperature, the mixture becoming homogeneous. The mixture was evaporated and re-evaporated with 200 ml of water to give a gum, which was dissolved in 500 ml of water. The solution was extracted firstly with 500 ml of chloroform and then with 250 ml portions of chloroform, acidified to pH 2 with ca 80 ml of 2 N hydrochloric acid and again extracted with 500 ml of chloroform followed by two 250 ml portions of chloroform. The aqueous layer was concentrated and passed down a column of cation exchange resin (B.D.H., Zerolit 225, SRC 13, RSO3H; 750 g; freshly regenerated in the acid cycle). The column was eluted with water and there were collected six 250 ml fractions. The first four fractions were combined, evaporated and re-evaporated with water to remove hydrogen chloride. There was obtained a final residue of (1R,S)-1-[(N-benzyloxycarbonyl-L-alanyl)- amino]ethylphosphonic acid which was separated as follows:
  The latter residue was dissolved in 400 ml of water and titrated with 1 M benzylamine to pH 4.5. The resulting solution was concentrated and crystallized from water to give 5.3 g of the benzylamine salt of (1S)-1-[(Nbenzyloxycarbonyl- L-alanyl)amino]ethylphosphonic acid of melting point 210- 215°C. Concentration of the mother liquors followed by further recrystallization from water gave the benzylamine salt of (1R)-1-[(Nbenzyloxycarbonyl- L-alanyl)amino]ethylphosphonic acid in a first crop of 0.59 g [melting point 226-228°C (decomposition); [α]D 20 = -32.3° (c = 1% in acetic acid)] and a second crop of 0.825 g] melting point 225-227°C (decomposition); [α]D 20 = -33.0° (c = 1% in acetic acid)]. Recrystallization of the first crop from water gave 0.333 g of pure benzylamine salt of the Rstereoisomer; melting point 226-228°C (decomposition); [α]D 20 = -33.1° (c=1% in acetic acid).
  1.1 g (2.5 mmol) of the benzylamine salt of (1R)-1-[(N-benzyloxycarbonyl-Lalanyl) amino]-ethylphosphonic acid were dissolved in 4 ml of 2 N ammonium hydroxide, passed down a column of cation exchange resin (B.D.H., Zerolit 225, SRC 13, RSO3H; 120 g; freshly regenerated in the acid cycle) and eluted with water. There were collected 200 ml of acid eluate, which was concentrated to 100 ml. To this were added 100 ml of methanol, 0.3 g of 5% palladium-on-charcoal catalyst and 3 drops of glacial acetic acid. The mixture was hydrogenated at room temperature and atmospheric pressure. The catalyst was filtered off and the solvent evaporated. The residual gum was reevaporated with three 50 ml portions of n-propanol to give 0.6 g of a gummy solid of melting point ca 275-280°C (decomposition). After further recrystallization from water and ethanol, there was obtained 0.2 g of (1R)-1- (L-alanylamino)-ethylphosphonic acid of melting point 295-296°C (decomposition); [α]D 20 = -44.0° (c=1% in water).
  The different ways of synthesis of alafosfalin were described: 1). 1R-1-(L-alanylamino)-ethanephosphonous acid (0.034 M), mercuric chloride (0.068 M) and water (175 ml) were mixed and heated to reflux for 1 hour The white insoluble mercuric chloride which formed was removed by filtration and the aqueous filtrate was evaporated to dryness. The oily residue was dissolved in ethanol (20 ml) and propylene oxide was added untilprecipitation was complete. Filtration gave 1R-1-(L-alanylamino)- ethylphosphonic acid, which was recrystallised from ethanol/water. MP: 293- 295°C, [α]D 20 =-49.3° (1%, H2O). Yield was 100% of theory

• Therapeutic Function

  Antibacterial

(S)-ALANYL-(R)-1-AMINOETHYLPHOSPHONIC ACID Upstream-Materialien And Downstream Produkte

Alafosfalin Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(25)Suppliers