2,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol

Bezeichnung:2,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol

CAS-Nr126-58-9

Englisch Name:Dipentaerythritol

CBNumberCB4494074

SummenformelC10H22O7

Molgewicht254.28

MOL-Datei126-58-9.mol

Synonyma

2,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol

2,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol physikalisch-chemischer Eigenschaften

Schmelzpunkt	215-218 °C (lit.)
Siedepunkt	356°C
Dichte	1.36 g/cm3 (20℃)
Dampfdruck	<0.00001 hPa (20 °C)
Brechungsindex	1.4455 (estimate)
storage temp.	Store below +30°C.
Löslichkeit	2.4g/l
Aggregatzustand	Crystalline Powder
pka	13.38±0.10(Predicted)
Farbe	White
PH	5 (2g/l, H2O, 20℃)
Wasserlöslichkeit	0.29 g/100 mL (20 ºC)
Sensitive	Hygroscopic
InChIKey	TXBCBTDQIULDIA-UHFFFAOYSA-N
LogP	1.8 at 23℃
CAS Datenbank	126-58-9(CAS DataBase Reference)
NIST chemische Informationen	1,3-Propanediol, 2,2'-[oxybis(methylene)]bis[2-(hydroxymethyl)-(126-58-9)
EPA chemische Informationen	Dipentaerythritol (126-58-9)

Sicherheit

S-Sätze:	24/25
WGK Germany	1
Selbstentzündungstemperatur	370 °C
TSCA	Yes
HS Code	29094919
Giftige Stoffe Daten	126-58-9(Hazardous Substances Data)
Toxizität	LD50 orally in Rabbit: > 2000 mg/kg

Gefahreninformationscode (GHS)

Dipentaerythritol Chemische Eigenschaften,Einsatz,Produktion Methoden

S-Sätze Betriebsanweisung:
S24/25:Berührung mit den Augen und der Haut vermeiden.
Beschreibung
Dipentaerythritol, also known as 2,2-[oxybis(methylene)- bis[2-hydroxymethyl]-1,3-propanediol, is a byproduct of pentaerythritol production. Because of its low solubility in water (0.22 g/ 100 g H2O at 20 ℃ and 10.0 g/100 g H2O at 100 ℃) it can be separated from pentaerythritol by fractional crystallization. The yield can be increased by changing the ratio of formaldehyde/ acetaldehyde towards stoichiometric. Adding pentaerythritol before starting the reaction also increases the yield. An effective method is to use acrolein instead of acetaldehyde. Dipentaerythritol can be produced intentionally from pentaerythritol by acid catalysis. Dipentaerythritol is purified as a coproduct by many pentaerythritol producers.
Chemische Eigenschaften
white crystalline powder
Verwenden
2,2''-(Oxybis(methylene))bis(2-(hydroxymethyl)-propane-1,3-diol) is used in preparation of new type of explosion-proof and flame-retardant tape material for cables.
Application
PVC stabilizers based on calcium – zinc carboxylates use micronized dipentaerythritol as costabilizer to improve the thermal stability of PVC during processing. This system grows fast in economic significance at the expense of leadbased stabilizers due to environmental reasons. Micronized dipentaerythritol is also used in intumescent paints. Synthetic lubricants are another important application for dipentaerythritol. The C5 – C10 esters are used as lubricants in jet engines and refrigerators. Rosin esters made from dipentaerythritol have a higher softening point than rosin esters from pentaerythritol.
Application
Dipentaerythritol (DPE) is an attractive raw material used for the production of polyesters, polyethers, polyurethanes, alkyd resins, photosensitive resin film. DPE is also employed in a wide range synthesis of specialty chemicals such as lubricants, coatings, adhesives, plasticizers and cosmetics.
synthetische
Dipentaerythritol is obtained as a byproduct in the manufacture of pentaerythritol; it is separated by fractional distillation.

Dipentaerythritol (DPE) has been prepared from a slurry of Pentaerythritol (PE) in sulfolane catalyzed by a low amount of sulfuric acid and was isolated with 16% yield (72% GPC purity) and 57% isolated selectivity.
synthesis of dipentaerythritol from pentaerythritol under acidic conditions
Flammability and Explosibility
Not classified

Dipentaerythritol Upstream-Materialien And Downstream Produkte

2,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

126-58-9, Dipentaerythritol Verwandte Suche:

Send Inquriy