Molybdaendisilicid

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H302：Gesundheitsschädlich bei Verschlucken.

  H312：Gesundheitsschädlich bei Hautkontakt.

  H332：Gesundheitsschädlich bei Einatmen.

• Sicherheit

  P261：Einatmen von Staub vermeiden.

  P264：Nach Gebrauch gründlich waschen.

  P264：Nach Gebrauch gründlich waschen.

  P270：Bei Gebrauch nicht essen, trinken oder rauchen.

  P271：Nur im Freien oder in gut belüfteten Räumen verwenden.

  P280：Schutzhandschuhe/Schutzkleidung/Augenschutz tragen.

  P301+P312：BEI VERSCHLUCKEN: Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.

  P302+P352：BEI BERÜHRUNG MIT DER HAUT: Mit viel Wasser/... (Hersteller kann, falls zweckmäßig, ein Reinigungsmittel angeben oder, wenn Wasser eindeutig ungeeignet ist, ein alternatives Mittel empfehlen) waschen.

  P304+P340：BEI EINATMEN: Die Person an die frische Luft bringen und für ungehinderte Atmung sorgen.

  P312：Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.

  P322：Gezielte Maßnahmen

  P330：Mund ausspülen.

  P363：Kontaminierte Kleidung vor erneutem Tragen waschen.

  P501：Inhalt/Behälter ... (Entsorgungsvorschriften vom Hersteller anzugeben) zuführen.

Molybdenum silicide Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R20/21/22:Gesundheitsschädlich beim Einatmen,Verschlucken und Berührung mit der Haut.

• S-Sätze Betriebsanweisung:

  S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.

• Chemische Eigenschaften

  Molybdenum silicide is dark-gray, crystalline powder. Not affected by air upto 1648°C. Not attacked by most inorganic acidsincluding aqua regia, but very soluble in hydrofluo-ric and nitric acids. Has high stress-rupture strength.

• Physikalische Eigenschaften

  The compound is thermally stable in air up to 1000°C. Corrosion resistant to molten metals such as Zn, Pd, Ag, Bi, and Rb. Corroded by liquid metals Mg, Al, Si, V, Cr, Mn, Fe, Ni, Cu, Mo, and Ce.

• Verwenden

  MOLYBDENUM SILICIDE can be considered as an electrically conducting ceramic with primary use in heating elements operating at temperatures above 1,500℃ in air. It is also considered as a material for very high temperature structural applications.

• Verwenden

  In electrical resistors, in protective coatings at high temperatures, and in engine parts in space vehicles Molybdenum silicide is used in electric furnaces, glass, steel, electronics and ceramics industries. It finds application in heat treatment materials. It is also used in microelectronics as a contact material. Further, it serves as a dry lubricant.

• Application

  Molybdenum disilicide (MoSi2) is a ceramic material with excellent high-temperature oxidation resistance and corrosion resistance. It can be used as a substrate material in the fabrication of thermophotovoltaics. MoSi2 can also be used as a protective coating on carbon-carbon composites for potential applications in aerospace and thermonuclear fusion.

• synthetische

  Molybdenum disilicide is a promising candidate material for high temperature structural applications. Molybdenum silicide is produced in much the same way as ferromolybdenum. A typical mix for the production of molybdenum silicide is 1,000pounds of molybdenum in oxide, 259 pounds of aluminum, 760 pounds of 90-percent ferrosilicon, 166 pounds of 50-percent ferro-silicon, 160 pounds of lime, and 50 pounds of high-grade fluorspar.

• Definition

  MOLYBDENUM SILICIDE is A cermet.

• Allgemeine Beschreibung

  This product has been enhanced for energy efficiency.

• Hazard

  MOLYBDENUM SILICIDE is Toxic material.

• Flammability and Explosibility

  Not classified

• Industrielle Verwendung

  High-temperature silicides are a new class of materials with potential applications in the temperature range 1200 to 1600 C.The silicide that seems most promising is molybdenum disilicide (MoSi₂) because of its high melting temperature (2200 C) and excellent oxidation resistance. It has a tetragonal crystal structure. A major problem is its absence of ductility at temperatures up to 1000 C. It also has poor high-temperature strength due to the presence of a grain boundary silicon-rich phase that may become viscous at very high temperatures. Recent research has shown that this problem may be solved by the addition of carbon to the material.

Molybdenum silicide Upstream-Materialien And Downstream Produkte

Molybdaendisilicid Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(161)Suppliers

12136-78-6, Molybdenum silicide Verwandte Suche: