506-77-4

Name	Cyanogen chloride
CAS	506-77-4
EINECS(EC#)	208-052-8
Molecular Formula	CClN
Molecular Weight	61.47
MOL File	506-77-4.mol

Chemical Properties

Appearance	Cyanogen chloride is a colorless gas or liquid (below 55℃ F/13℃ ) with a pungent, irritating odor. Shipped as a liquefied gas. A solid below—6℃ .
Melting point	-6°
Boiling point	14°C
density	1.186
vapor pressure	60kPa at 0℃
solubility	soluble in H2O, ethanol, ethyl ether
form	colorless gas
color	colorless vol liquid or gas
Water Solubility	soluble H2O, ether, alcohol [MER06]
Exposure limits	Ceiling limit 0.7 mg/m³ (0.3 ppm) (ACGIH).
History	Cyanogen chloride (CK) is a very volatile compound, but is less a fire or explosive hazard than hydrogen cyanide and therefore logistically speaking less problematic. (Industry has found cyanogen chloride the preferred reactant in processes to make synthetic rubber). Reportedly, France combined hydrocyanic acid with cyanogen chloride in World War I ("manguinite"). The use of cyanogen chloride in this mixture was intended as an irritant to make soldiers remove their masks, exposing themselves to these very toxic gases. Cyanogen chloride was also combined with arsenic trichloride later on in the war. Like hydrocyanic acid, cyanogen chloride tends to spontaneously polymerize and therefore was combined with stabilizers (sodium pyrophosphate) for longer shelf life.
LogP	0.64 at 20℃
CAS DataBase Reference	506-77-4
NIST Chemistry Reference	Cyanogen chloride(506-77-4)
EPA Substance Registry System	Cyanogen chloride ((CN)Cl)(506-77-4)

Safety Data

Hazard Codes	T
OEL	Ceiling: 0.3 ppm (0.6 mg/m3)
RIDADR	UN 1589
HazardClass	2.3
Safety Profile	Poison by ingestion, subcutaneous, and possibly other routes. Toxic by inhalation. Human systemic effects by inhalation: lachrymation, conjunctiva irritation, and chronic pulmonary edema or congestion. A primary irritant. A severe human eye irritant. An insecticide. Flammable when exposed to heat or flame. When heated to decomposition or on contact with water or steam, it will react to produce highly toxic and corrosive fumes of Cl-, CN-, and NOx. See also other cyanogen entries, CYANIDE, and CHLORIDES. less more
Hazardous Substances Data	506-77-4(Hazardous Substances Data)
Toxicity	CK may polymerize violently if contaminated with hydrogen chloride or ammonium chloride. Upon heating, it decomposes, producing toxic and corrosive fumes of hydrogen cyanide, hydrochloric acid, and nitrogen oxides. Hazardous polymerization can occur. Cyanogen chloride will react slowly with water to form hydrogen chloride gas. It acts on the body in two ways. Systemic effects of CK are much like those of hydrogen cyanide. Additionally, it causes irritation of the eyes, upper respiratory tract, and lungs. Eye irritation results in tearing. CK, like AC, stimulates the respiratory system and rapidly paralyzes it. Exposure is followed by immediate, intense irritation of the nose, throat, and eyes, with coughing, tightness in the chest, and lacrimation. This is followed by dizziness and increasing difficulty breathing. Unconsciousness comes next, with failing respiration and death within a few minutes. Convulsions, retching, and involuntary urination and defecation may occur. If these effects are not fatal, the signs and symptoms of pulmonary edema may develop. There may be repeated coughing, with profuse foamy sputum, rales in the chest, severe dyspnea, and distinct cyanosis. Recovery from the systemic effects is usually as prompt as in AC poisoning. However, a higher incidence of residual damage to the central nervous system should be expected. Based upon the concentration of the cyanogen chloride to which the victim has been exposed, the pulmonary effects may evolve instantly or may be delayed until the systemic effects have subsided. Consequently, early prognosis must be cautious. less more

Hazard Information

Chemical Properties

Cyanogen chloride is a colorless gas or liquid (below 55℃ F/13℃ ) with a pungent, irritating odor. Shipped as a liquefied gas. A solid below—6℃ .

Uses

In chemical synthesis. Military poison gas.

General Description

A colorless gas or liquid with a strong acrid/pungent odor. Boils at 60°F. Liquid density 10.0 lb / gal. Shipped as a liquid confined under its own vapor pressure. A highly toxic lachrymator. Has been used as a tear gas. Vapor is heavier than air. Prolonged exposure of the container to fire or intense heat may cause violent rupturing and rocketing.

Air & Water Reactions

Soluble in water. Very slow reaction with water to form hydrogen cyanide.

Reactivity Profile

CYANOGEN CHLORIDE may trimerize violently to form cyanuric chloride, catalyzed by hydrogen chloride or ammonium chloride. Reacts exothermically with alkenes and alkynes. Benzene and cyanogen halides yield HCl as a byproduct (Hagedorn, F. H. Gelbke, and Federal Republic of Germany. 2002. Nitriles. In Ullman Encyclopedia of Industrial Chemistry. Wiley-VCH Verlag GmbH & Co. KGaA.).

Health Hazard

VAPOR: POISONOUS IF INHALED OR IF SKIN IS EXPOSED. Irritating to eyes. LIQUID: POISONOUS IF SWALLOWED. Will burn skin and eyes.

Fire Hazard

Not flammable. POISONOUS GASES ARE PRODUCED WHEN HEATED IN FIRE. Overheated containers can explode.

Potential Exposure

Cyanaogen chloride is used as a fumi- gant, metal cleaner; in ore refining; production of synthetic rubber and in chemical synthesis. CK is used as a military poison gas (blood agent). It forms cyanide in the body.

First aid

If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 minutes, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, includ- ing resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a Medical facility. When this chemical has been swallowed, get medi- cal attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit. Medical observation is recommended for 24 to 48 hours after breathing overexposure, as pulmonary edema may be delayed. As first aid for pulmonary edema, a doctor or authorized paramedic may consider administering a drug or other inhalation therapy. If frostbite has occurred, seek medical attention immediately; do NOT rub the affected areas or flush them with water. In order to prevent further tissue damage, do NOT attempt to remove frozen clothing from frostbitten areas. If frostbite has NOT occurred, immediately and thoroughly wash contaminated skin with soap and water. If cyanide poisoning is suspected: Use amyl nitrate capsules if symptoms develop. All area employees should be trained regularly in emergency mea- sures for cyanide poisoning and in CPR. A cyanide antidote kit should be kept in the immediate work area and must be rapidly available. Kit ingredients should be replaced every 1 2 years to ensure freshness. Persons trained in the use of this kit; oxygen use, and CPR must be quickly available.

Shipping

UN1589 Cyanogen chloride, stabilized, Hazard Class: 2.3; Labels: 2.3-Poisonous gas, 8-Corrosive material Inhalation Hazard Zone A. Cylinders must be transported in a secure upright position, in a well-ventilated truck. Protect cylinder and labels from physical damage. The owner of the compressed gas cylinder is the only entity allowed by federal law (49CFR) to transport and refill them. It is a violation of transportation regulations to refill compressed gas cylinders without the express written per- mission of the owner. Military driver shall be given full and complete information regarding shipment and condi- tions in case of emergency. AR 50-6 deals specifically with the shipment of chemical agents. Shipments of agent will be escorted in accordance with AR 740-32.

Incompatibilities

CK is incompatible with; or, may react with most basic and acidic solvents. CK reacts slowly with water or water vapor forming toxic hydrogen cyanide and hydrogen chloride. Cyanogen chloride may polymerize vio- lently if contaminated with chlorine. CK is unstable; it may be stabilized (i.e., inhibited) to prevent polymerization. In crude form CK trimerizes violently if catalyzed by traces of hydrogen chloride or ammonium chloride. Contact with alcohols, acids, acid salts; amines, strong alkalis; olefins, and strong oxidizers may cause fire and explosion. Heat causes decomposition producing toxic and corrosive fumes of hydrogen cyanide, hydrochloric acid, nitrogen oxides. Reacts slowly with water or water vapor, forming hydrogen chloride. Attacks copper, brass, and bronze in the presence of moisture.

Description

Cyanide poisoning was first reported with the effects of extract of bitter almonds; then cyanide was identified and isolated from cherry laurel. Cyanogen chloride was first prepared in 1787 by the action of chlorine upon hydrocyanic acid (aka prussic acid) and was called ‘oxidized prussic acid.’ The correct formula for cyanogen chloride was first established in 1815. Cyanogen chloride was used in World War I in 1916.

Waste Disposal

Return refillable compressed gas cylinders to supplier. React with strong calcium hypo- chlorite solution for 24 hours, then flush to sewer with large volumes of water.

Production Methods

Cyanogen chloride is produced by the action of chlorine on moist sodium cyanide suspended in carbon tetrachloride and kept cooled to -3°C, followed by distillation.

Hazard

Cyanogen chloride becomes volatile as temperatures increase, and the DOT lists it as a 2.3 poison gas. The NFPA 704 designation for CK is estimated to be health 4, flammability 0,reactivity 2, and special ?0. Cyanogen chloride vapors are highly toxic. It has a four-digit UN identification number of 1589 (inhibited). Treatment for either AC or CK poisoning is to follow the treatment protocols for airway, breathing, and circulation (ABCs) and administer oxygen to assist breathing. Instructions for administration and dosage should be based on local protocols and with the advice of a physician. Sodium nitrate is administered to produce methemoglobin, thus seizing the cyanide on the methemoglobin. The sodium thiosulfate combines with the confiscated cyanide to form thiocyanate, which is then excreted from the body.

Environmental Fate

The primary effect of cyanide poisoning results from the inhibition of the metal-containing enzymes, specifically, cytochrome oxidase a3 (containing iron) within the mitochondria. Cyanide poisons the mitochondrial electron transport chain within cells and renders the body unable to derive energy (ATP) from oxygen, therefore causing rapid death. Other mechanisms include pulmonary arteriolar and/or coronary vasoconstriction that results in cardiogenic shock and pulmonary edema. Cyanide can also directly stimulate chemoreceptors in the aorta and carotid artery, causing hyperpnea.

storage

Corrosive, Toxic gas. Color Code—Yellow Stripe:Reactivity Hazard; Store separately in an area isolated fromflammables, combustibles, or other yellow-coded materials.Prior to working with this chemical you should be trainedon its proper handling and storage. Store in tightly closedcontainers in a cool, well-ventilated area. Provide ventilation along the floor as the vapors are heavier than air.Procedures for the handling, use, and storage of cylindersshould be in compliance with OSHA 1910.101 and1910.169, as with the recommendations of the CompressedGas Association.

Toxicity evaluation

At room temperature, cyanogen chloride is a colorless gas with a pungent, biting odor that has been described as ‘pepper-like.’ Cyanogen chloride is soluble in both water (6.00E + 04 mg l^-1) and most organic solvents (e.g., chloroform, ethanol, or benzene); however, such mixtures often are unstable.
Based on the high volatility and rapid hydrolysis of cyanogen chloride, its adsorption to soil and sediment is not an important environmental fate process. Estimated vapor pressure of 1230 mmHg suggests that cyanogen chloride will volatilize rapidly from water surfaces and it is expected to volatilize from dry soil surfaces.

Send Inquriy