1760-24-3

Hazard Information

Material Safety Data Sheet(MSDS)

Questions And Answer

• Uses

  This substance is used in the following products: adhesives and sealants, coating products and finger paints. Other release to the environment of this substance is likely to occur from: indoor use and outdoor use resulting in inclusion into or onto a materials (e.g. binding agent in paints and coatings or adhesives).

  ;

• service life

  Other release to the environment of this substance is likely to occur from: outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials) and indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment).

  ;

• Introduction

  N-[3-(Trimethoxysilyl)propyl]ethylenediamine (equal to A-1120, GF 91, KBM603) is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level.
  N-[3-(Trimethoxysilyl)propyl]ethylenediamine is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as "coupling agent" leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. Applications:
  • N-[3-(Trimethoxysilyl)propyl]ethylenediamine may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties.
  • Used as an effective coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite.
  • Used as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and expoxy thermoset composites.
  • Used as a mineral binders in in foundry and abrasive composite applications, to improve adhesion, increase composite strength.
  • Used as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces.
  • Used as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy adhesives and sealants.
  ;

Spectrum Detail

Well-known Reagent Company Product Information

Supplier

Related Products