Nizatidine

Gefahreninformationscode (GHS)

• Bildanzeige (GHS)

  

• Alarmwort

  Warnung

• Gefahrenhinweise

  H302：Gesundheitsschädlich bei Verschlucken.

• Sicherheit

  P264：Nach Gebrauch gründlich waschen.

  P264：Nach Gebrauch gründlich waschen.

  P270：Bei Gebrauch nicht essen, trinken oder rauchen.

  P301+P312：BEI VERSCHLUCKEN: Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... (geeignete Stelle für medizinische Notfallversorgung vom Hersteller/Lieferanten anzugeben) anrufen.

  P501：Inhalt/Behälter ... (Entsorgungsvorschriften vom Hersteller anzugeben) zuführen.

Nizatidine Chemische Eigenschaften,Einsatz,Produktion Methoden

• R-Sätze Betriebsanweisung:

  R22:Gesundheitsschädlich beim Verschlucken.

• S-Sätze Betriebsanweisung:

  S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.

• Beschreibung

  Nizatidine is the fifth H₂-antagonist introduced to the world market as an antiulcer agent. It is reported to be effective in the treatment of both duodenal and gastric ulcers or the prevention of their recurrences. Given once-daily, nizatidine’s bioavailability is not diminished by the concurrent administration of an antacid.

• Chemische Eigenschaften

  White Crystalline Powder

• Originator

  Lilly (USA)

• Verwenden

  For the treatment of acid-reflux disorders (GERD), peptic ulcer disease, active benign gastric ulcer, and active duodenal ulcer.

• Verwenden

  immune suppressant, antineoplastic, antiviral

• Verwenden

  Histamine H2-receptor antagonist related to Ranitidine (R120000). Antiulcerative.

• Verwenden

  Nizatidine is used for treating stomach and duodenum ulcers and other conditions accompanied by elevated acidity of the gastrointestinal tract.

• Indications

  Nizatidine is the newest H2-receptor antagonist. Similar to ranitidine, it has a relative potency twice that of cimetidine.About 90% of an oral dose is absorbed, with a peak plasma concentration occurring after 0.5 to 3 hours; inhibition of gastric secretion is present for up to 10 hours.The elimination half-life is 1 to 2 hours, and more than 90% of an oral dose is excreted in the urine.

• Definition

  ChEBI: A member of the class of 1,3-thiazoles having a dimethylaminomethyl substituent at position 2 and an alkylthiomethyl moiety at position 4.

• Manufacturing Process

  Nizatidine may be prepared by 2 ways. 1. A mixture of (25.7 g) 2-nitromethylenethiazolidine and acetonitrile (50 ml) was stirred and heated at 40°C under nitrogen. Methylamine gas (16.0 g) was passed into the stirred mixture over 45 minutes to give a solution. A slurry of 4-chloromethyl-2-dimethylaminomethylthiazole hydrochloride (40.0 g) (prepared as described in EP 49,618) in acetonitrile (50 ml) was added to the solution over a period of 4.5 hours whilst methylamine gas was bubbled through the reaction mixture such that methylamine (38.3 g) was added over the period (total methylamine added was 54.3 g). The temperature of the reaction mixture varied between 24° and 35°C during the addition. After the addition, the mixture was diluted with acetonitrile (50 ml) and stirred at ambient temperature for 17 hours. A solid was removed by filtration and the filtrate was split into 2 equal portions.
  Portion 1: The solution was evaporated to give a black oil which was partitioned between water (200 ml) and chloroform (200 ml). The separated chloroform phase was washed with saturated brine, then dried over magnesium sulphate, filtered and evaporated to give a reddish oil which was dissolved in acetone (200 ml), boiled under reflux, cooled to 40°C and then seeded with nizatidine. The mixture was left to stand at 0°-5°C for 64 hours. The mixture was filtered to give nizatidine (10.4 g, 37%) m.p. 118-122°C. The structure was confirmed by1H NMR. The product was 95.4% pure by HPLC.
  Portion 2: The mixture was evaporated to give an oil which was taken up in chloroform (200 ml) then washed with water (100 ml). The chloroform solution was washed with brine (100 ml), dried over magnesium sulphate, and then concentrated under reduced pressure at 45°C to give a brown oil. The oil was dissolved in acetone (200 ml) and activated charcoal (0.5 g) was added to the solution. The mixture was boiled under reflux for 10 minutes, then cooled to 45°C and filtered at this temperature to remove the charcoal. The filtrate was cooled to 20°C, seeded with nizatidine (0.05 g), then cooled 0°5°C for 45 minutes during which time crystallisation occurred. The mixture was filtered to give nizatidine (9.4 g, 32.2%).
  2. A mixture of 2-nitromethylenethiazolidine (12.6 g) and water (30.0 ml) was stirred and heated at 40°C under argon. Methylamine (20.0 g of a 40% w/w aqueous solution) was added slowly over 30 minutes to the reaction mixture at 40°C. The mixture was cooled at ambient temperature and further methylamine (23.6 g of 40% w/w aqueous solution) was added over 2.5 hours and a solution of 4-chloromethyl-2-dimethylaminomethylthiazole dihydrochloride (25.0 g) in water (30 ml) was added over 5.5 hours with the addition of the thiazole starting simultaneously with the addition of the methylamine. The reaction mixture was left to stir for a further 15 minutes and then was concentrated under reduced pressure. The solid obtained was dissolved in a mixture of methyl ethyl ketone (200 ml), aqueous potassium carbonate solution (43 ml, 10% w/w). The mixture was warmed slightly to obtain a solution. The mixture was separated and the aqueous layer was washed with methyl ethyl ketone (2 times 130 ml and then 1 times 100 ml). The combined organic layers were evaporated under reduced pressure to yield crude nizatidine (approximately 25.2 g), which was shown to be 89.4% pure by HPLC. The crude solid was dissolved in dichloromethane (300 ml). The solution was washed with water (3 times 75 ml). The combined aqueous layer and the washings were back extracted with dichloromethane and the combined organic layers were dried and concentrated under reduced pressure to give nizatidine (21.1 g, 74.3% yield). The solid was dissolved in ethanol (45 ml) by warming on a steam bath. The solution was removed from the steam bath treated with activated charcoal (2.3 g) and the mixture was boiled for a further 8 minutes. The mixture was hot filtered. The filtrate was cooled and filtered

• Trademarks

  Axid (Braintree); Axid (Reliant).

• Therapeutic Function

  Antiulcer

• Allgemeine Beschreibung

  Nizatidine, N-[2-[[[2-(dimethylamino)methyl]-4-thiazolyl]methyl]thio]-ethyl]-N'-methyl-2-nitro-1,1-ethenediamine (Axid), is an off-white to buff crystallinesolid that is soluble in water, alcohol, and chloroform. It isa thaizole derivative of raniditine and has pKas of 2.1 (side chain) and 6.8 (dimethylamino). Nizatidine’s mechanism ofaction is similar to other H₂-antagonists, as is its receptor selectivity.It is more potent than cimetidine.
  Nizatidine has excellent oral bioavailability (＞90%).The effects of antacids or food on its bioavailability arenot clinically significant. The elimination half-life is 1 to2 hours. It is excreted primarily in the urine (90%) andmostly as unchanged drug (60%). Metabolites include nizatidinesulfoxide (6%), N-desmethylnizatidine (7%), andnizatidine N-oxide (dimethylaminomethyl function).Nizatidine has no demonstrable antiandrogenic action, effectson other hormones, or inhibitory effects on cytochromeisozymes involved in the metabolism of other drugs.

• Clinical Use

  H2 -receptor antagonist

• Synthese

  Nizatidine is N-[2-[[[2-[(dimethylamino)methyl]-4-thiazolyl]methyl] thio] ethyl]-2-nitro-1,1-ethenediamine (16.2.15). According to its chemical structure, nizatidine is somewhat of a hybrid structure of ranitidine and famotidine, in which a side chain of ranitidine and carrying heterocycle, 2-aminothiazol, are used. Likewise, its synthesis also is a specific combination of pathways used for making both prototype drugs. 2-(Dimethylaminomethyl)- 4-hydroxymethylthiazol serves as the initial compound, from which the desired nizatidine (16.2.15) is synthesized by subsequent reaction with 2-mercaptoethylamine hydrochloride and then with N-methyl-1-methythio-2-nitroethenamine.

  

• Veterinary Drugs and Treatments

  While nizatidine acts similarly to cimetidine and ranitidine as an H₂ blocker to reduce gastric acid secretion in the stomach, in small animal medicine its use has been primarily for its prokinetic effects. It may be useful to treat delayed gastric emptying, pseudo-obstruction of the intestine and constipation.
  H₂ blockers may be useful in preventing hemorrhagic necrosis in feline pancreatitis.

• Arzneimittelwechselwirkung

  Potentially hazardous interactions with other drugs
  Antifungals: absorption of itraconazole, ketoconazole and possibly posaconazole reduced, avoid with posaconazole suspension.
  Antivirals: concentration of atazanavir reduced; concentration of raltegravir possibly increased - avoid; avoid for 12 hours before and 4 hours after rilpivirine.
  Cytotoxics: avoid with dasatinib and erlotinib; possibly reduced absorption of pazopanib - give at least 2 hours before or 10 hours after nizatidine; possibly reduced absorption of lapatinib.
  Ulipristal: contraceptive effect possibly reduced - avoid with high dose ulipristal.

• Stoffwechsel

  A small amount of nizatidine is metabolised in the liver: nizatidine N-2-oxide, nizatidine S-oxide, and N-2- monodesmethylnizatidine have been identified, the latter having about 60% of the activity of nizatidine. More than 90% of a dose of nizatidine is excreted in the urine, in part by active tubular secretion, within 12 hours, about 60% as unchanged drug. Less than 6% is excreted in the faeces

Nizatidine Upstream-Materialien And Downstream Produkte

Nizatidine Anbieter Lieferant Produzent Hersteller Vertrieb Händler.

Global(369)Suppliers

76963-41-2, Nizatidine Verwandte Suche: