Isophorone diamine is widely used as an epoxy-resin
hardener. It is a strong sensitizer and can cause
airborne contact dermatitis.
Isophorone diamine is a common hardener for epoxy resins.
One of the three epoxy networks based on diglycidyl ether of bisphenol-A epoxy prepolymer cured with aliphatic amines, namely triethylenetetramine (TETA), 1-(2-aminoethyl) piperazine (AEP) and isophoronediamine (IPD). ?Allergic contact dermatitis (ACD) ca
Isophorondiamine mainly used as epoxy curing agents, mainly for applications requiring low color, low odor, high flexural strength and excellent chemical resistance of epoxy formulations. Suitable for floor coatings, fillers and paving mixes.
Isophorondiamine is made from isophorone nitrile, ammonia, and hydrogen, which leads to simultaneous imination and hydrogenation of the resulting imine and nitrile groups. Catalysts employed are mainly cobalt or ruthenium.
A clear to light-yellow liquid. Highly soluble though slightly denser than water. May be toxic by inhalation and skin absorption. Corrosive to skin. Used to make other chemicals.
Soluble in water. Flash Point 234 F. Melting point 50 F. Reacts with carbon dioxide from the air to form deposits around vents (Roger Patrick, DuPont Engineer).
ISOPHORONE DIAMINE is an amine. Amines are chemical bases. They neutralize acids to form salts. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides (Roger Patrick, DuPont Engineer). Corrodes aluminum and steel in the presence of moisture and carbon dioxide [USCG, 1999].
Inhalation of high concentrations of vapor causes irritation, coughing, and nausea. Eyes: May cause inflammation/burns. Skin: May cause burns. Ingestion: Nausea.
Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form.
Isophorone diamine is widely used in urethane and
epoxy coatings for light-stable, weather-resistant prop-
erties. It is used in water proofing and paving concret-
ing, and in the manufacture of diisocyanates and
polyamides as an epoxy resin hardener. It is a strong
sensitizer and can cause airborne contact dermatitis.
