Auramine is a yellow crystalline powder or flaky material. Molecular weight= 267.4; Freezing/Meltingpoint=136℃. Hazard Identification (based on NFPA-704M Rating System): Health 3, Flammability 1, Reactivity 0;(hydrochloride) Health 3, Flammability 0, Reactivity 0.Insoluble in water.
Auramine is a yellow crystalline powder or
flaky material.
Yellow dye for paper, textiles, leather; antisep-
tic; fungicide.
ChEBI: A member of the class of imines that is benzophenone imine carrying two dimethylamino substituents at positions 4 and 4'. The hydrochloride salt is the biological stain 'auramine O'
(a) will Sulphur dissolved in 4-(4-(Dimethylamino)benzyl)-N,N-dimethylbenzenamine?methane. Add in ammonia and sodium chloride, ammonia in 175 ℃ heat the mixture, with hot water extraction dye and salting out (GP53614); (b) Bis (4 – (dimethylamino) phenyl) methanone and ammonia and Zinc chloride in a total of 150 ~ 160 ℃ heat (GP 29060). Free base is to add the same amount of naoh aqueous solution hydrochloride, sodium carbonate and ammonia and have to.
Yellow crystalline powder or yellow needles.
Yellow pyoctanine neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. May generate hydrogen, a flammable gas, in combination with strong reducing agents such as hydrides.
Inhalation of material may be harmful. Contact may cause burns to skin and eyes. Inhalation of Asbestos dust may have a damaging effect on the lungs. Fire may produce irritating, corrosive and/or toxic gases. Some liquids produce vapors that may cause dizziness or suffocation. Runoff from fire control may cause pollution.
Some may burn but none ignite readily. Containers may explode when heated. Some may be transported hot.
Fungicide: Auramine is used industrially as a dye or dye intermediate for coloring textiles, paper, and leather. Also
used as an antiseptic (a powerful antiseptic in ear and nose
surgery and in gonorrhea treatment)
Auramine is used industrially as a dye
or dye intermediate for coloring textiles; paper, and leather.
Also used as an antiseptic (a powerful antiseptic in ear and
nose surgery, and treatment of gonorrhea) and fungicide.
Human exposure to auramine occurs principally through
skin absorption or inhalation of vapors. Low-level dermal
exposure to the consumer may occur but would be limited
to any migration of auramine from fabric, leather, or paper
goods.
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.
Color Code—Blue: Health Hazard/Poison: Store ina secure poison location. Prior to working with auramineyou should be trained on its proper handling and storage.Store in tightly closed containers in a cool, well-ventilatedarea away from oxidizers. Sources of ignition, such as smoking and open flames, are prohibited where this chemical isused, handled, or stored in a manner that could create apotential fire or explosion hazard. A regulated, marked areashould be established where this chemical is handled, used,or stored in compliance with OSHA Standard 1910.1045.
UN2811 Toxic solids, organic, n.o.s., Hazard
Class: 6.1; Labels: 6.1-Poisonous materials, Technical
Name Required. UN3143 Dyes, solid, toxic, n.o.s. or Dye
intermediates, solid, toxic, n.o.s., Hazard Class: 6.1;
Labels: 6.1-Poisonous materials, Technical Name Required.
Properties and Applications
brilliant green yellow. Soluble in cold water, soluble in hot water for brilliant yellow, boils part decomposition, soluble in ethanol for yellow. In concentrated sulfuric acid to colorless, dilution after buff. The dye for C.I. Basic Yellow 2 free base. Used for oil, paraffin wax, alcohol solvent, alcohol soluble paint, printing ink color.
Standard
|
Light Fastness
|
Heat-resistant(℃)
|
water
|
Sodium Carbonate(5%)
|
Hydrochloric acid(5%)
|
Melting point
|
Stable
|
ISO
|
Poor
|
120
|
70≥100
Sublimation
|
Poor
|
Good
|
General
|
Incompatible with oxidizers (chlorates,
nitrates, peroxides, permanganates, perchlorates, chlorine,
bromine, fluorine, etc.); contact may cause fires or explosions.
Keep away from alkaline materials, strong bases,
strong acids, oxoacids, epoxides.
Consult with environmental
regulatory agencies for guidance on acceptable disposal
practices. Generators of waste containing this contaminant
(≥100 kg/mo) must conform with EPA regulations governing
storage, transportation, treatment, and waste disposal.
Incinerate in furnace with afterburner and scrubber.