Ethyl hexaldehyde is a colorless liquid with amild, pleasant odor. Molecular weight = 128.24; Boilingpoint = 163℃; Flash point = 44.4℃; Autoignitiontemperature = 190℃. Explosive limits: LEL = 0.85% at93℃; UEL = 7.2% at 135℃. Hazard Identification (basedon NFPA-704 M Rating System): Health 2, Flammability 2,Reactivity 1. Slightly soluble in water.
Ethyl hexaldehyde is a colorless liquid with a
mild, pleasant odor.
2-Ethylhexanal may be used as an analytical standard for the determination of the analyte in the atmosphere of charcoal plants by high-performance liquid chromatography and UV detection. It may also be used as an internal standard for the determination of the analyte from wood pellets(6) by chromatography-based techniques.
2-Ethylhexanal is used as an intermediate for chemical synthesis?and in the production of pharmaceuticals and odorous substances.
Organic synthesis, perfumes.
ChEBI: A fatty aldehyde that is heptane in which one of the hydrogens at position 3 has been replaced by a formyl group. It is a metabolite of the plasticisers di-2-ethylhexyl phthalate (DEHP) and di-2-ethylhexyl adipate (DEHA).
White liquid with a mild odor. Floats on water.
Spontaneously flammable in air. [Steele and Dugan, Chem. Eng. 66:160(1960)]. Insoluble in water.
2-ETHYLHEXANAL are aldehydes. Aldehydes are frequently involved in self-condensation or polymerization reactions. These reactions are exothermic; they are often catalyzed by acid. Aldehydes are readily oxidized to give carboxylic acids. Flammable and/or toxic gases are generated by the combination of aldehydes with azo, diazo compounds, dithiocarbamates, nitrides, and strong reducing agents. Aldehydes can react with air to give first peroxo acids, and ultimately carboxylic acids. These autoxidation reactions are activated by light, catalyzed by salts of transition metals, and are autocatalytic (catalyzed by the products of the reaction). The addition of stabilizers (antioxidants) to shipments of aldehydes retards autoxidation.
Inhalation may be irritating to mucous membrane; overexposure may cause dizziness and collapse. Ingestion causes irritation of mouth and stomach. Contact with eyes or skin causes irritation.
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.
Moderately toxic by
ingestion and intraperitoneal routes. Mildly
toxic by inhalation and skin contact. An eye
and severe skin irritant. See also
ALDEHYDES. Dangerous fire hazard;
spontaneously flammable in air. To fight
fire, use foam, CO2, dry chemical, water
spray, mist, fog. Incompatible with oxidizing
materials. When heated to decomposition it
emits acrid and irritating fumes.
It is used as a solvent extraction
chemical; in organic synthesis; perfume formulation,
disinfectant
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin,remove contaminated clothing and wash immediately withsoap and water. Seek medical attention immediately. If thischemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart actionhas stopped. Transfer promptly to a medical facility. Whenthis chemical has been swallowed, get medical attention.Give large quantities of water and induce vomiting. Do notmake an unconscious person vomit. Medical observation isrecommended for 24-48 h after breathing overexposure, aspulmonary edema may be delayed
Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with ethyl hexaldehyde you should betrained on its proper handling and storage. Before enteringconfined space where this chemical may be present, checkto make sure that an explosive concentration does not exist.Store in tightly closed containers in a cool, well-ventilatedarea away from oxidizers, strong bases, and combustiblematerials. Metal containers involving the transfer of thischemical should be grounded and bonded. Where possible,automatically pump liquid from drums or other storage containers to process containers. Drums must be equipped withself-closing valves, pressure vacuum bungs, and flamearresters. Use only nonsparking tools and equipment, especially when opening and closing containers of this chemical. Sources of ignition, such as smoking and open flames,are prohibited where this chemical is used, handled, orstored in a manner that could create a potential fire orexplosion hazard. Wherever this chemical is used, handled,manufactured, or stored, use explosion-proof electricalequipment and fittings
UN1191 Octyl aldehydes, Hazard Class: 3;
Labels: 3-Flammable liquid
May form explosive mixture with air.
Violent reaction with oxidizers. Incompatible with strong
acids; caustics, ammonia, amines. May ignite spontaneously when spilled on clothing or other absorbent materials.
May form unstable peroxides on contact with air; under
certain conditions ignites spontaneously with air.
Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal,
state, and local environmental regulations must be observed.
