The 1,4-dichloro-2-butenes are colorlessliquids. Some have a distinct odor.(cis-isomer): Molecular weight = 125; Boilingpoint=153℃; Freezing/Melting point = 248℃. Explosivelimits: LEL = 1.5%; UEL = 4.0%. Reacts slowly withwater.(trans-isomer): This material has a sweet, pungent odor.Boiling point = 155.5℃; Freezing/Melting point 5 1-3℃;Flash point = 53℃. The explosive limits for the trans-isomer are LEL = 1.5%; UEL = 4%. Hazard Identification(based on NFPA-704 M Rating System): Health 2,Flammability 2, Reactivity 0. Insoluble in water. The transisomer, only, appears on the EHS list.
The 1,4-dichloro-2-butenes are colorless
liquids. Some have a distinct odor. (cis-isomer)
1,4-Dichloro-2-butene is an organic reagent used in the preparation of heterocyclic compounds. Used in the synthesis of γ-turn peptidomimetic scaffold neuroprotectives as a JNK3 allosteric ligand.Environmental toxin on US EPA Toxic Release Inventory list (TRI) list.
ChEBI: Trans-1,4-Dichlorobutene is an organochlorine compound.
A clear colorless liquid. Burns, though may be difficult to ignite. Corrosive to tissue. Denser than water and insoluble in water. Vapors heavier than air. Used to make other chemicals.
Highly flammable. Reacts slowly with water to form hydrochloric acid. Insoluble in water.
Halogenated unsaturated aliphatic compounds, such as TRANS-1,4-DICHLORO-2-BUTENE, are moderately or very reactive. Reactivity generally decreases with increased degree of substitution of halogen for hydrogen atoms. Low molecular weight haloalkanes are highly flammable and can react with some metals to form dangerous products. Materials in this group are incompatible with strong oxidizing and reducing agents. Also, they are incompatible with many amines, nitrides, azo/diazo compounds, alkali metals, and epoxides.
Inhalation of vapor irritates nose and throat. Contact with eyes causes intense irritation and tears. Contact of liquid with skin causes severe blistering and dermatitis. Ingestion causes severe irritation of mouth and stomach.
Special Hazards of Combustion Products: Decomposition vapors contain phosgene and hydrogen chloride gases; both are toxic and irritating.
Reactivity with Water Reacts slowly to form hydrochloric acid; Reactivity with Common Materials: Corrodes metal when wet; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.
Confirmed carcinogen
with experimental carcinogenic and
neoplastigenic data. Poison by ingestion,
inhalation, and intravenous routes.
Moderately toxic by skin contact. An experimental teratogen. Other experimental
reproductive effects. Mutation data
reported. A severe skin and eye irritant.
When heated to decomposition it emits
toxic fumes of Cl-. See also
CHLORINATED HYDROCARBONS,
ALIPHATIC .
DC occurs as a by-product in chloroprene manufacture and may be used as a chemical
intermediate
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions,including resuscitation mask) if breathing has stopped andCPR if heart action has stopped. Transfer promptly to amedical facility. When this chemical has been swallowed,get medical attention. If victim is conscious, administerwater or milk. Do not induce vomiting.
(1) Color Code—Red (cis-isomer): FlammabilityHazard: Store in a flammable liquid storage area orapproved cabinet away from ignition sources and corrosiveand reactive materials. (2) Color Code—White: Corrosiveor Contact Hazard; Store separately in a corrosion-resistantlocation. Prior to working with this chemical you should betrained on its proper handling and storage. Before enteringconfined space where this chemical may be present, checkto make sure that an explosive concentration does not exist.Store in tightly closed containers in a cool, well-ventilatedarea away from oxidizers. Where possible, automaticallypump liquid from drums or other storage containers to process containers. A regulated, marked area should be established where this chemical is handled, used, or stored incompliance with OSHA Standard 1910.1045.
UN3384 Toxic by inhalation liquid, flammable, n.
o.s. with an LC50 ≦ 1000 ml/m3 and saturated vapor
concentration ≧to 10 LC50, Hazard class: 6.1; Labels:
6.1-Poisonous materials, 3-Flammable liquid, Technical Name
Required, Inhalation Hazard Zone B. UN2920 Corrosive
liquids, flammable, n.o.s., Hazard class: 8; Labels: 8-Corrosive
material, 3-Flammable liquid. The code “D” identifies proper
shipping names which are appropriate for
describing materials for domestic transportation but may be
inappropriate for international transportation under the provisions of international regulations, e.g., IMO, ICAO). An alternate proper shipping name may be selected when either
domestic or international transportation is involved
Vapors may form explosive mixture
with air. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away
from alkaline materials, strong bases, strong acids, oxoacids,
and epoxides. (cis-isomer): Reacts slowly with water forming hydrogen chloride. Attacks metals and may form other,
more dangerous materials; attacks some plastics.
High-temperature incineration
with hydrochloric acid scrubbing. Consult with environmental regulatory agencies for guidance on
acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with
EPA regulations governing storage, transportation, treatment, and waste disposal.
