Tin tetrachloride is a colorless fuming liquid with a pungent odor. Tin tetrachloride is soluble in cold water,alcohol,carbon disulfide, and oil of turpentine, that is decomposed by hot water to form hydrochloric acid with the evolution of heat. Tin tetrachloride is corrosive to metals and tissue.Used as a conductive coating and a sugar bleach,and in drugs, ceramics, soaps,and blue printing.
Tin(IV) chloride is a mordant for dying fabrics; a stabilizer for perfume in
soap; used in weighting silk; in ceramic coatings; in manufacturing blue print
papers; and to produce fuchsin. Also, tin(IV) chloride is used in preparing
many organotin compounds.
Tin(IV) chloride is prepared by reacting tin or tin(II) chloride with chlorine:
Sn + 2Cl2 → SnCl4
SnCl2 + Cl2 → SnCl4
Tin (IV) chloride appears as white crystals with a strong pungent chlorine odour. On heating,
tin (IV) chloride decomposition emits acrid fumes. At room temperature, it is colourless
and releases fumes on contact with air, giving a stinging odour. Stannic chloride was
used as a chemical weapon during World War I. It is also used in the glass container
industry for making an external coating that toughens the glass. Stannic chloride is used
in chemical reactions with fuming (90%) nitric acid for the selective nitration of activated
aromatic rings in the presence of unactivated ones. Tin (IV) chloride reacts violently with
water or moist air to produce corrosive hydrogen chloride. Tin (IV) chloride reacts with
turpentine, alcohols, and amines, causing fire and explosion hazard. It attacks many metals,
some forms of plastic, rubber, and coatings.
Stannic chloride is a white to yellow powder with a faint odor of HCl.
Tin tetrachloride is a colorless fuming liquid.
Colorless, fuming, caustic liquid, that water converts into a crystalline solid, SnCl4?5H2O.Keep well stoppered. Soluble in cold water, alcohol, carbon disulfide;
decomposed by hot water.
Colorless fuming liquid; corrosive; density 2.234 g/mL; freezes at -33°C; boils at 114.15°C; critical temperature 318.75°C; critical pressure 37.98 atm; critical volume 351 cm3/mol; soluble in cold water, evolving heat; decomposed by hot water; soluble in alcohol, benzene, toluene, chloroform, acetone and kerosene
The pentahydrate is a yellowish-white crystalline solid or small, fused lumps; faint odor of HCl; density 2.04 g/cm3; decmposes at 56°C; very soluble in water; soluble in ethanol.
Tin(IV) chloride is a precursor to prepare organotin compounds such as tetralkyltin and dialkyldichlorotin(IV), which find applications as catalysts and polymer stabilizers. As a Lewis acid catalyst, it is used in Fridel-Crafts reactions for alkylation and cyclization. It is involved in the selective nitration of aromatic compounds in the presence of fuming nitric acid. Furthermore, it is used to prepare tin(IV) oxide coating by sol-gel process.
Electroconductive and electroluminescent coatings, mordant in dyeing textiles, perfume stabilization, manufacture of fuchsin, color lakes, ceramic
coatings, bleaching agent for sugar, stabilizer for
certain resins, manufacture of blueprint and other
sensitized papers, other tin salts, bacteria and fungi
control in soaps
Tin(II) chloride is prepared by dissolving tin in hydrochloric acid followed by evaporation of the solution and crystallization.
Often sold in the form of
the double salt with sodium chloride: Na2SnCl6?H2O.
Stannic chloride (SnCl4) is a strong Lewis acid widely used as a promoter or catalyst in organic synthesis. It is soluble in most organic solvents.
Fumes in moist air. Reacts with water to form Hydrochloric Acid in dense white fumes [Merck 11th ed. 1989].
Acidic salts, such as STANNIC CHLORIDE, are generally soluble in water. The resulting solutions contain moderate concentrations of hydrogen ions and have pH's of less than 7.0. They react as acids to neutralize bases. These neutralizations generate heat, but less or far less than is generated by neutralization of inorganic acids, inorganic oxoacids, and carboxylic acid. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible. Many of these compounds catalyze organic reactions (ethylene oxide polymerization). Combination of the chloride with turpentine is strongly exothermic, and may lead to ignition, [Mellor, 1941, Vol. 7, 446].
Evolves heat on contact with moisture. Corrosive liquid
CORROSIVE and/or TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Fire will produce irritating, corrosive and/or toxic gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Contact with molten substance may cause severe burns to skin and eyes. Runoff from fire control or dilution water may cause pollution.
EXCEPT FOR ACETIC ANHYDRIDE (UN1715), THAT IS FLAMMABLE, some of these materials may burn, but none ignite readily. May ignite combustibles (wood, paper, oil, clothing, etc.). Substance will react with water (some violently), releasing corrosive and/or toxic gases and runoff. Flammable/toxic gases may accumulate in confined areas (basement, tanks, hopper/tank cars, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water. Substance may be transported in a molten form.
Poison by
intraperitoneal route. Moderately toxic by
inhalation. A corrosive irritant to skin, eyes,
and mucous membranes. Combustible by
chemical reaction. Upon contact with
moisture, considerable heat is generated.
Violent reaction with K, Na, turpentine,
ethylene oxide, alkyl nitrates. Dangerous;
hydrochloric acid is liberated on contact
with moisture or heat. When heated to
decomposition it emits toxic fumes of Cl-.
See also HYDROCHLORIC ACID.
Tin tetrachloride is used in the production of blueprints and electroconductive readings, as a bleaching agent for sugar and resin stabilizer.
UN2440 Stannic chloride, pentahydrate, Hazard class: 8; Labels: 8-Corrosive material.
SnCl4 fumes in moist air due to formation of a hydrate. Fractionate it in a ground glass still and store it in the absence of air. Possible impurities are SO2 and HCl [Baudler in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol I p 729 1963]. It forms a solid pentahydrate [10026-06-9] which smells of HCl and is obtained when the anhydrous salt is dissolved in a small volume of H2O. Also reflux it with clean mercury or P2O5 for several hours, then distil it under (reduced) N2 pressure into a receiver containing P2O5. Finally redistil it. Alternatively, distil it from Sn metal under vacuum in an all-glass system and seal off in large ampoules. SnCl4 is available commercially as 1M solutions in CH2Cl2 or hexane. HARMFUL VAPOURS.
Slowly forms hydrochloric acid in cold water; fast reaction in hot water and steam. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, water, turpentine, potassium, sodium, ethylene oxide; nitrates, alcohols, amines, chlorine, strong acids; strong bases. Attacks metals, rubbers and some plastics in the resence of moisture.
SnCl4: Pour onto sodium bicarbonate; spray with ammonium hydroxide while adding crushed ice; when reaction subsides, flush down drain.
