아지리딘 호모중합체

그림문자(GHS)

• 그림문자(GHS)

  

• 신호 어

  Warning

• 유해·위험 문구

  H302：삼키면 유해함

  H317：알레르기성 피부 반응을 일으킬 수 있음

  H319：눈에 심한 자극을 일으킴

  H411：장기적 영향에 의해 수생생물에 유독함

• 예방조치문구

  P273：환경으로 배출하지 마시오.

  P280：보호장갑/보호의/보안경/안면보호구를 착용하시오.

  P302+P352：피부에 묻으면 다량의 물로 씻으시오.

  P305+P351+P338：눈에 묻으면 몇 분간 물로 조심해서 씻으시오. 가능하면 콘택트렌즈를 제거하시오. 계속 씻으시오.

아지리딘 호모중합체 화학적 특성, 용도, 생산

• 화학적 성질

  Clear viscous liquid

• 용도

  Polyethyleneimine is used as a polyelectrolyte multilayer on charged surfaces to provide a biocompatible coating on surfaces.1Detergents, adhesives, water treatment, printing inks, dyes, cosmetics, and paper industry, adhesion promoter, lamination primer, fixative agent, flocculant, cationic dispersant, stability enhancer, surface activator, chelating agent, scavenger for aldehydes and oxides.

• 주요 응용

  Polyethyleneimine(PEI) can be used as a non-viral synthetic polymer carrier for in vivo delivery of therapeutic nucleic acids. The interaction between the negatively charged nucleic acid and the positively charged polymer backbone leads to the formation of nanoscale complexes. This neutralising complex protects the enclosed nucleic acid from enzymes and maintains its stability until cellular uptake occurs. For example, human serum albumin-coupled PEI shows good pDNA transfection and low toxicity.
  PEI can be used to functionalize single-walled nanotubes (SWNTs) to improve their solubility and biocompatibility while maintaining the structural integrity of the original SWNT. Covalently functionalized SWNTs can be used for CO2 uptake and gene delivery.
  Branched PEI can also be used to modify the surface properties of adsorbents. PEI-modified aqueous zirconia/PAN nanofibres have a high fluoride adsorption capacity and a wide working pH range, and can therefore be used for groundwater defluoridation.
  

• 생산 방법

  Polyethylenimine is produced by the homopolymerization of ethylenimine. The reaction is catalyzed by acids, Lewisacids, or haloalkanes. The polymerization is usually carried out at 90 – 110 ℃ in water or in a variety of organic solvents. The average molecular mass of the polyethylenimine prepared as described above is 10 000 – 20 000. Higher molecular mass polymers are prepared by addition of a difunctional alkylating agent, such as chloromethyloxirane or 1,2-dichloroethane. Polyethylenimines with a higher average molecular mass can also be provided by ultrafiltration of polymers with a broad mass distribution. Likewise, polymers of lower molecular mass can be obtained by inclusion of a low molecular mass amine, such as 1,2- ethanediamine, during polymerization. By using these techniques a range of molecular masses from 300 to 10 6 can be obtained. Cross-linking during the polymerization of ethylenimine in organic solvents leads to solid polyethylenimines. Furthermore the polymerization process can be conducted on the surface of organic or inorganic materials, thus fixing the polyethylenimines to a support.
  

• 일반 설명

  All polyethylene imine polymers are hydrophilic and may contain approx. 30% hydrated water.

• 상품명

  Lupasol, Polymin, Catiofast, Lugalvan (BASF), Epomin (Nippon Shokubai).
  

• 생물학적 활성

  Polyethylenimine is nondegradable and the molecular weight of PEI affects the cytotoxicity and gene transfer activity. Polyethylenimine acts as a low toxicity and efficient gene vector. 

• Structure and conformation

  Polyethyleneimine(PEI) exists as both a branched and linear structure. Branched PEI (bPEI) is synthesized via acid-catalyzed polymerization of aziridine, whereas the linear structure (lPEI) is synthesized via ring opening polymerization of 2-ethyl-2-oxazoline followed by hydrolysis.

아지리딘 호모중합체 준비 용품 및 원자재

아지리딘 호모중합체 공급 업체

Global(346)Suppliers

아지리딘 호모중합체 관련 검색