Cyclobutane-1,2,3,4-tetracarboxylic dianhydride

그림문자(GHS)

• 그림문자(GHS)

  

• 신호 어

  Warning

• 유해·위험 문구

  H315：피부에 자극을 일으킴

  H319：눈에 심한 자극을 일으킴

  H335：호흡 자극성을 일으킬 수 있음

• 예방조치문구

  P261：분진·흄·가스·미스트·증기·...·스프레이의 흡입을 피하시오.

  P264：취급 후에는 손을 철저히 씻으시오.

  P264：취급 후에는 손을 철저히 씻으시오.

  P271：옥외 또는 환기가 잘 되는 곳에서만 취급하시오.

  P280：보호장갑/보호의/보안경/안면보호구를 착용하시오.

  P302+P352：피부에 묻으면 다량의 물로 씻으시오.

  P305+P351+P338：눈에 묻으면 몇 분간 물로 조심해서 씻으시오. 가능하면 콘택트렌즈를 제거하시오. 계속 씻으시오.

Cyclobutane-1,2,3,4-tetracarboxylic dianhydride MSDS

• Cyclobutane-1,2,3,4-tetracarboxylic dianhydride

Cyclobutane-1,2,3,4-tetracarboxylic dianhydride 화학적 특성, 용도, 생산

• 개요

  Cyclobutane-1,2,3,4-tetracarboxylic dianhydride (CBDA) is an anhydride with a cis-trans-cis configuration. It can be used to synthesise polyimide films. Polymer films have excellent heat resistance, are transparent and colourless, with transmittance ranging from 81.5% to 85.8%, and are suitable for use in high quality display materials such as liquid crystal displays. The polymers made with pyrrolidine dianhydride instead of CBDA are dark yellow in colour and have a lower transmittance in the range of 48% to 63.9%.

• 화학적 성질

  White to light yellow solid

• 용도

  cyclobutane-1,2,3,4-tetracarboxylic dianhydride and diamine monomer are used for preparation a polyimide (PI), the type of polyimide has excellent electrical characteristics and optical type, with the material prepared the PI film, in addition to having a higher rate cast visible outside, and can withstand high temperatures thirty-four Baidu. Its performance is very good, is the preparation of a liquid crystal display with an ideal material for the film.

• 제조 방법

  Preparation of 1,2,3,4- cyclobutanetetracarboxylic acid dianhydride (CBDA)To a 2L quartz glass photoreactor equipped with sixteen UV lamps (300nm) , a stirrer and a cooler were attached and 250ml of ethyl acetate and 100g of maleic anhydride were added thereto followed by stirring for complete mixing. To avoid an excessive temperature increase, an air-cooling type cooler was first run and then UV light was illuminated for a photoreaction for 24h with stirring so as not to have the reactants adhered to the reactor walls. As a result, 71g of white solid was obtained. After the filtration, the white solid was dried for 24h in a vacuum dryer at 60°C Thus-obtained solid was then added to acetic anhydride, dissolved therein and slowly heated to 150°C followed by the reaction for 24h . Hot reaction solution was filtered through a filter paper to remove impurities and kept in a freezer at the temperature of 0°C or less for recrystallization for 24h to obtain a yellow solid. Thus-obtained solid was filtered and washed three times with 1,4-dioxane to remove acetic anhydride, and then dried in a vacuum oven at 60°C for 48h to obtain 64g of 1, 2, 3, 4 -cyclobutane tetracarboxylic acid dianhydride (CBDA) .

  

Cyclobutane-1,2,3,4-tetracarboxylic dianhydride 공급 업체

Global(270)Suppliers

Cyclobutane-1,2,3,4-tetracarboxylic dianhydride 관련 검색