폴리에틸렌 테레프탈산

폴리에틸렌 테레프탈산 화학적 특성, 용도, 생산

• 개요

  폴리에틸렌 테레프탈레이트(polyethylene terephthalate)는 투명도가 높고 단열성이 좋다. 열가소성 . 가벼우며 맛과 냄새가 없다.

• 용도

  페트(PET)라고 가리킨다. 전선 피복 '생활 용품·장난감·전기절연체·라디오와 텔레비전 케이스, 포장재에 사용한다. 시중에 유통되는 플라스틱 음료수병의 대부분을 차지하고 있어, 흔히 말하는 페트병은 이 원료로 만든 병을 말한다.

• 개요

  Polyethylene terephthalate (PET) is a saturated thermoplastic polyester. The first PET fibers, DacronTM and TeryleneTM, were first developed by Whinfield and Dixon in England. The first DacronTM plant began production in 1953. PET is produced using direct polycondensation reaction with ethylene glycol and terephthalic acid.lt is widely used in synthetic fibers which simulate wool, cotton, or rayon. PET films MylarTM, MelinexTM) are biaxially oriented by cold stretching the extruded sheets in two directions. This increases the crystallinity and reduces the tendency to shrink when heated. PET films are used in capacitors,slot liners for motors,magnetic tape, x-ray film, photographic film, graphic art and drafting applications,and food packaging such as boil-in-bags.

• 용도

  Polyethylene terephthalate, commonly referred to by PET, is a member of the polyester family of polymers.The combination of properties like hardness and rigidity,dimensional stability, chemical resistance andlightweight, makes PET a flexible material widely used in several applications such as fibers, sheets, films,and beverage containers. Used in electrical parts including relay bases and lamp sockets, pump housings, gears, sprockets, chair arms, casters and furniture components.
  Like other polyesters, PET is produced industrially by direct esterification of dicarboxylic acids with diols.Typical production processes are based on polymerization of ethylene glycol (MEG) with either purifiedterephthalic acid (PTA) or dimethyl terephthalate (DMT) in the presence of a metal catalyst.

• 정의

  ChEBI: Polyethylene terephthalate is a macromolecule composed of repeating ethylene terephthalate units. It is used in synthetic fibers; beverage, food and other liquid containers; thermoforming applications; and engineering resins often in combination with glass fiber.

• 제조 방법

  Poly(ethylene terephthalate) is prepared by the reaction of either terephthalic acid or dimethyl terephthalate with ethylene glycol, and its repeating unit has the general structure
  
  The resin has the ability to be oriented by a drawing process and crystallized to yield a high-strength product.

• 일반 설명

  Made using premium Eastman PETG + Multi-wall Carbon Nanotubes (CNTs). 3DXNano^? CNT enchanced compounds are used in critical applications that require electrostatic discharge(ESD) protection and a high level of cleanliness. Manufatuered with consistency in mind-3DXTech uses a proprietary formulation of virgin Eastman PETG (Polyethylene Terephtalate Glycol Copolymer) resin; multi-wall carbon nanotubes; and process/dispersion modifiers in order to give you the best possible printing experience.
  
  Benefits of PETG include:
  
  
  • Superior Chemical Resistance vs. ABS
  • Amorphous: Low and near isotropic shrinkage
  • Low moisture absorption: 3x lower vs. ABS
  • Very low odor emitted during printing
  • Superior ductility vs. ABS
  • Wide processing range: 230 - 270 °C
  
  Benefits of CNTs include:
  
  
  • Consistent surface resistivity
  • low additive loading rates
  • Improved retention of impact & elongation
  • Low particulate contamination
  • Minimal contribution to outgassing and ionic contamination

폴리에틸렌 테레프탈산 준비 용품 및 원자재

폴리에틸렌 테레프탈산 공급 업체

Global(144)Suppliers

폴리에틸렌 테레프탈산 관련 검색